Ján Brindza

Dr. Ján Brindza

orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
16 July 2024 in E3S Web of Conferences
Verified
Conference Paper
Open access
PDF file
JBJán Brindza
Ján Brindza
JEJan Erdelyi
Jan Erdelyi
PKPeter Kyrinovic
Peter Kyrinovic
The paper is focused on describing the prototype of a mobile mapping system and presenting the preliminary findings from tests of its components. The mobile mapping system consists of a combination of several components, including three 2D lidars, a 3D lidar, an inertial measurement unit, a stereo camera, and rotary encoders. The paper describes the planned tests of each component and the entire mobile mapping system. The results from lidar and rotary encoder testing are presented. Differences in measured distance were calculated for lidars, based on which they were compared to each other. Testing of rotary encoders was conducted to determine the conversion constant of measured increments from rotary encoders to metric units, followed by the determination of their accuracy.

26 March 2025 in Pollack Periodica
Verified
Journal Article
Closed access
PDF file
JBJán Brindza
Ján Brindza
PKPavol Kajánek
Pavol Kajánek
JEJán Erdélyi
Ján Erdélyi
PKPeter Kyrinovič
Peter Kyrinovič
The paper focuses on describing the developed low-cost mobile mapping system for the purpose of automated mapping using simultaneous localization and mapping techniques. The paper also focuses on testing the light detection and ranging that form that system. The mobile mapping system consists of a combination of multiple sensors, including a trio of 2D and 3D light detection and ranging a stereo camera, an inertial measurement unit, and rotary encoders.The components make up three subsystems, which are detailed described. A section of the paper is dedicated to the light detection and ranging tests performed in the accuracy of measured distance and measured geometry. In the final section of the paper, planned tests for the remaining components of the mobile mapping system are described.

30 October 2023 in MATEC Web of Conferences
Verified
Journal Article
Open access
PDF file
JBJán Brindza
Ján Brindza
JEJan Erdelyi
Jan Erdelyi
PKPeter Kyrinovic
Peter Kyrinovic
The paper deals with prototyping a kinematic measurement system for digitizing indoor environments of buildings. The scanning system itself consists of several sensors for localization (inertial measurement unit, rotary encoders and a stereo camera), while its main part is a Velodyne lidar. The procedure of data processing is performed by an algorithm for simultaneous localization and mapping (SLAM). The paper describes the hardware of the measurement system. Part of the contribution is the proposal of a series of tests evaluating the quality of the prototype of the mobile mapping system. The tests verify the accuracy of length measurement, the accuracy of the determination of the inclination of the measuring system, and the accuracy of the lidar position determination.

1 January 2023 in AIP Conference Proceedings
Verified
Conference Paper
Open access
PDF file
PKPavol Kajánek
Pavol Kajánek
JBJán Brindza
Ján Brindza
AKAlojz Kopacik
Alojz Kopacik
Ján ErdélyiJán Erdélyi
Ján Erdélyi
Peter KyrinovičPeter Kyrinovič
Peter Kyrinovič
The article presents a proposed mapping system that uses three stably located 2D lidars to map the indoor environment and create a model. Each lidar has its sensor frame, whose position and orientation change during the measurement. For this purpose, simultaneous mapping and localisation SLAM is used. By transforming lidar scans into a global coordinate system, the system’s change of position and orientation is calculated. The accuracy of the transformation is affected by the surrounding environment, where narrow straight corridors make it challenging to calculate the transformation. Errors in the determination of transformation parameters (translation and rotation) accumulate in the calculated position and orientation of the system. These errors are then transferred to the created model of the environment. The accuracy of determining the position and orientation of the system is increased by using additional sensors such as an inertial measuring unit, speed sensor, and stereo camera. Part of the data processing is identifying the repeatedly traversed area by optimising the trajectory and model. The proposed system is low-cost, portable, and allows 2D lidar when navigating and mapping the surrounding 3D space. The system’s accuracy is evaluated based on comparison results with the reference model.

27 October 2025 in Pollack Periodica
Verified
Journal Article
Closed access
PDF file
JBJán Brindza
Ján Brindza
JEJán Erdélyi
Ján Erdélyi
PKPeter Kyrinovič
Peter Kyrinovič
The paper focuses on the creation of 3D models of indoor building environments. The data for model creation is acquired using a developed mobile mapping system, which consists of a combination of various sensors. It includes a trio of 2D and 3D light detection and ranging unit, an inertial measurement unit, a stereo camera, and rotary encoders. The collected data is processed using simultaneous localization and mapping through a graph-based approach. The quality of the created 3D model is numerically quantified. The first part of the paper describes the developed mobile mapping system, which comprises three subsystems. The next section explains the processing of the collected data using simultaneous localization and mapping. The quality of the created 3D model is subsequently analyzed. The final section evaluates the results and outlines future objectives of the research.