Minimising the transport of corrosive reactants such as carbon dioxide, hydrogen sulfide and chloride ions to the surfaces of carbon steel pipes by the use of polymer barrier layers is of major interest in the oil and gas sector. In these applications, there is a requirement to assess the performance of these barrier layers although it is difficult to perform long-term predictions of barrier properties from the results of short-term measurements. New methodologies have been successfully developed to study the permeability of carbon dioxide (CO2) and hydrogen sulfide (H2S) through polymer layers under variable conditions of elevated temperatures of 100 °C and pressures of the order of 400 barg. In situ variation of the temperature and the inlet pressure of the gas (or gas mixture) allowed the activation energy and pressure dependence of the permeability to be determined without outgassing of the specimen. These methodologies have been applied to the measurement of the permeability of moulded polyphenylene sulfide (PPS) to supercritical CO2 in the presence of H2S. The diffusion coefficients of sodium chloride and potassium chloride through both PPS and polyether ether ketone (PEEK) at ambient temperature and pressure have also been measured.
There is a need to understand the permeation flux behavior of polymers exposed to high-pressure and -temperature fluids continuously for long time intervals. This study investigates evidence of structural alterations in polymer specimens as indicators of material aging through the monitoring of transport coefficients at pressure steps from 10 barg to 400 barg and temperatures ranging between 30 °C and 90 °C. The continuous flow permeation methodology is a well-established technique described in the literature for applications from membrane separation processes to polymeric pressure barriers used for complex fluid containment in the oil and gas industry. In this study, a novel methodology has been used that allows the permeating flux of supercritical CO2 and H2 gas through raised-temperature polyethylene and polyvinylidene fluoride films at varying elevated temperatures and pressures to be determined, over timescales of several months using gas chromatography. During these long-term measurements, changes in the test conditions, principally in temperature and stepwise increases in differential gas pressure, were made in order to determine the activation energy for permeation along with the transport coefficients of permeation, diffusion, and sorption. At no time was the polymer film allowed to outgas during the temperature or pressure alterations. The permeation experiments are complemented by differential scanning calorimetry tests to track changes in polymer crystallinity before and after exposure of the specimen to plasticizing gases, which revealed the extent of structural alterations inflicted on the specimen due to high temperature and pressure loads. It is seen that specimens that were exposed to starting high pressures aged more than those that had gradual increases in feed pressure. Furthermore, the relationship between transport coefficients and fractional free volume in the polymer upon exposure to high pressure and temperature conditions is explored. Lastly, the benefit of using fugacity in place of feed pressure for the calculation of the permeability coefficient is discussed. This study contributes to the understanding of the effect of prolonged exposure of the polymeric specimens to CO2 and H2 gas under stepwise pressure and temperature loading on their flux behaviors and crystallinity, and to candidate polyethylene-based specimens for oil field deployment.
Graphene is potentially the perfect barrier material, being impermeable even to the smallest gas molecules, but in practice it is difficult to achieve defect‐free graphene layers at large scale. Here, exceptional barrier performance for laminates comprising graphene nanoplatelet (GNP) paper sandwiched between two discs of polyamide 11 (PA11) is demonstrated. Results are compared with sandwich structures incorporating melt‐processed GNP/PA11 composites, and with chemical vapor deposition (CVD) monolayer graphene transferred onto PA11. PA11 is of interest as a polymer commonly utilized within the oil and gas industry for antiwear and barrier layers in flexible risers. Permeation studies were undertaken for a feed mixture of carbon dioxide (CO2) with 1.48% hydrogen sulfide (H2S) at a temperature of 60 °C and pressures up to 400 bar, providing the first data for the performance of graphene as a barrier to a supercritical fluid. Whereas a GNP/PA11 composite and a CVD graphene monolayer have little effect on permeability, compared to a pure PA11 control sample, a GNP/PA11 laminate reduces CO2 permeability by more than an order of magnitude, and reduces H2S permeability to an undetectable level.
Maximizing containment of gases and vapors in composite pipelines is critical for long‑term, reliable operation. The selection of polymeric barrier materials for liners therefore requires understanding how polymer chemistry and morphology control gas transport. In practice, commercial liner grades may contain proprietary additives, and qualification demands that permeation rates measured on disc specimens cut from the liner wall be consistent with measurements on full pipe sections with connectors. In addition, estimates are needed for the contribution of reinforcement layers to radial and axial permeation towards venting points in different piping configurations.This work applies a multiscale approach to characterize permeation of CO₂, H₂S and CH₄ mixtures through reinforced polymer composite pipes for oil and gas transportation manufactured with different liner chemistries. The methodology, as shown in Figure 1, integrates coupon‑scale measurements of individual‑gas permeation over a broad temperature range with finite‑element modelling and full‑scale pipe tests, thereby reducing uncertainties in long‑term predictions of pipe integrity, fugitive emissions and in‑service venting requirements. Coupon data are used to calibrate the numerical model, which is then validated against whole‑pipe experiments and extended to quantify the contribution of the reinforcement layer to overall permeation.The approach is demonstrated on unbonded glass‑reinforced thermoplastic composite pipes with polyethylene (PE) and polyphenylene sulfide (PPS) liners. Experiments at 103 barg and 82 °C show that upgrading the liner from PE to PPS markedly decreases gas permeation at pipe level, with approximate reductions of 30‑fold for CH₄, 20‑fold for H₂S and 10‑fold for CO₂, in agreement with numerical predictions.