A new method based on a hybrid uniform theory of diffraction-physical optics (UTD-PO) formulation for the analysis of the propagation loss due to the diffraction that takes place at the top of a rectangular obstacle that is illuminated from a low source (i.e., the transmitter height is smaller than the obstacle height) is presented. The receiver is considered to be located at the shadow boundary of the second wedge of the plateau so that the solution is valid to estimate the mentioned diffraction loss in order to be incorporated into more general propagation models. In such models, for example, both the free space losses and the typical urban final diffraction loss down to street level (occurring at the receiving point due to an eventual final diffracting obstacle) will be considered. In this sense, it should be noted that the proposed formulation is not a general formalism to estimate radiowave propagation over plateaux (as the receiver is not arbitrarily located). The method, which is mathematically less complex than existing techniques, applies Babinet's principle, and is validated through the solid agreement obtained with measurements at 60 GHz and the comparison with a method which is based on the evaluation of a Fresnel surface integral.
5 September 2019 in IEEE Antennas and Wireless Propagation Letters
A novel model for the reverberation time is proposed in this letter, based on Room Electromagnetics theory. While the commonly used models consider absorption based on a constant rate of wall interactions within a given time, the proposed model takes the variance of interactions into account. Moreover, the frequency-dependency of electromagnetic reverberation characteristics in indoor environments is experimentally investigated from 1 to 40 GHz. The reverberation time is found to be a decreasing function of frequency. A model is then developed to predict the room's quality factor, reverberation time, and average absorption coefficient. Good agreement is obtained with the limited results reported in the literature for similar scenarios. This approach aims to be an accurate alternative to the reverberation time measurements and computations in indoor environments by linking it to the theory of electromagnetic fields in cavities.