Jingye Sun

Dr. Jingye Sun


Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 November 2022 in Journal of Physics D: Applied Physics
Verified
Journal Article
Closed access
XLXue Li
Xue Li
HJHengyuan Jiao
Hengyuan Jiao
MZMingqiang Zhu
Mingqiang Zhu
Tao DengTao Deng
Tao Deng
JSJingye Sun
Jingye Sun
THz metamaterial (MM) microfluidic sensors, which can be utilized for the detection of small volume liquid specimen, have attracted much attention in biosensing applications. In this paper, we propose a novel microfluidic channel embedded terahertz MM sensor, which employs split ring resonators (SRRs) and asymmetric two-gap SRRs for the detection of liquid samples. Unlike currently reported THz MM microfluidic sensors utilizing microfluidic superstrate-metal-substrate structure, our approach combines the microfluidic superstrate with substrate, by designing micro-channels underneath the gap of the SRRs within the polydimethylsiloxane substrate. It could be easily fabricated by standard photolithography techniques. The simulated results show that the performance of the sensor is dependent on the spacing angle between two gaps, the orientation of the gaps, as well as the polarization of electric fields. Furthermore, maximum Q factors of 9.5 and 44 are achieved for dipole resonance, with corresponding figure of merits of 0.63 and 2.89 RIU−1 for transmission and reflection scenarios. Thus, this concept and method not only provides sensitive biosensing for liquid-based samples, but also can be applied to other MM structures to further improve the sensitivity.

24 May 2024 in IEEE Transactions on Terahertz Science and Technology
Verified
Journal Article
Closed access
GMGuanqiong Ma
Guanqiong Ma
XLXue Li
Xue Li
FHFangjing Hu
Fangjing Hu
Tao DengTao Deng
Tao Deng
LLLi Linan
Li Linan
JSJingye Sun
Jingye Sun
The manufacturing of three-dimensional (3D) metamaterials remains a major challenge and the narrow-band absorption characteristics limit the practical applications of terahertz metamaterial absorbers. To this end, we propose to combine the 3D printing technology with the microfluidics technique to fabricate a terahertz (THz) metamaterial absorber with a relative broad band (∼0.3 THz) under 1 THz. Here, the absorber consists of embedded multilayer disk microfluidics channels stacked vertically within the resin and filled with liquid metal (LM). It has been demonstrated that the experimental results agree well with the simulations, where the absorber exhibits polarization sensitive and incident angle insensitive in the frequency range from 0.25 to 0.6 THz. The proposed method enables the fabrication of terahertz metamaterial devices with complex structures in a fast, simple and low-cost way, which is no longer limited to conventional photolithography processes. This approach effectively stimulates many potential applications in emerging THz technologies, such as sensing, imaging, and wireless communications.

14 October 2021 in Journal of Lightwave Technology
Verified
Journal Article
Closed access
YZYang Zhang
Yang Zhang
YLYuning Li
Yuning Li
JSJingye Sun
Jingye Sun
QYQing You
Qing You
KLKe Li
Ke Li
Tao DengTao Deng
Tao Deng
A room-temperature broadband (visible to near infrared spectrum) photodetector based on single wall carbon nanotubes (SWCNTs) and graphene heterojunction was fabricated in this work, by drop-casting the SWCNTs suspension onto the graphene field-effect transistor with the buried-gate electrode. A high photoresponsivity of 109 A/W and a fast photoresponse speed of 2.9 ms were obtained within the visible region based on the photogating effect. This high gain mechanism leads to a high photoconductive gain (9.1 × 10 6 ). In addition, the photodetector exhibits a photoresponsivity of 51.5 A/W at 940 nm, indicating a wide spectrum detection capability. Moreover, a higher photoresponsivity can be obtained by tuning the source-drain and gate bias voltages. This approach provides an easy and feasible way to achieve broadband heterojunction photodetectors with high-performance.

7 March 2025 in IEEE Transactions on Terahertz Science and Technology
Verified
Journal Article
Closed access
XLXue Li
Xue Li
JSJingye Sun
Jingye Sun
FHFangjing Hu
Fangjing Hu
QYQing You
Qing You
YLYuning Li
Yuning Li
Tao DengTao Deng
Tao Deng
The vibrational and rotational energy levels of numerous biological macromolecules fall within the terahertz range, making terahertz spectroscopy being a viable method for identifying biological samples. However, most biomolecular activities can only be observed in a liquid environment. Being a polar substance, water exhibits strong absorption characteristics towards terahertz waves. In this study, we proposed a novel terahertz metamaterial sensor with embedded microfluidic channels fabricated in the PDMS substrate that operates in reflective modes. This approach not only enables the reduction of terahertz wave absorptions by water by decreasing the volume of the liquid sample but also realizes the real-time detection of liquid samples. Simulated results reveal that the double splits ring resonators (DSRRs) metal structure exhibits two resonant dips below 1 THz, with a maximum figure of merit (FOM) of 0.77 RIU-1. Meanwhile, the sensors show significant resonant frequencies red-shifts as the refractive index for the analytes varies in the microchannels. Moreover, the split ring resonators with two gaps (SRRsTG) and DSRRs sensors were fabricated and demonstrated using a terahertz time-domain spectroscopy system (THz-TDS). It has been found that the experimental results are in good agreement with the simulation results when the microchannels are empty (air). The sensors are capable of distinguishing various liquid analytes (e.g., water, acetone and alcohol) by observing the shifts and amplitude variations for two resonant frequencies under different electric field polarizations. Additionally, the DSRRs sensors show higher sensitivities in comparison to those of SRRsTG sensors, giving frequency shifts up to 92.1 GHz in TE mode and 192.3 GHz in TM mode for alcohol (99.7%) detections. The presented approach has been easily realized by standard lithography methods and could be applied to other metamaterial structures, as well as for biological samples detections.

1 November 2025 in IEEE Sensors Journal
Verified
Journal Article
Closed access
XLXue Li
Xue Li
JSJingye Sun
Jingye Sun
QYQing You
Qing You
YLYuning Li
Yuning Li
Tao DengTao Deng
Tao Deng

24 November 2021 in Nanotechnology
Verified
Journal Article
Closed access
YLYuning Li
Yuning Li
SLShasha Li
Shasha Li
JSJingye Sun
Jingye Sun
KLKe Li
Ke Li
ZLZewen Liu
Zewen Liu
Tao DengTao Deng
Tao Deng
Unlike zero-bandgap graphene, molybdenum disulfide (MoS 2 ) has an adjustable bandgap and high light absorption rate, hence photodetectors based on MoS 2 have attracted tremendous research attention. Most of the reported MoS 2 photodetectors adopted back-gate field-effect transistor (FET) structure due to its easy fabrication and modulation features. However, the back-gate FET structure requires very high gate voltage up to 100 V, and it is impossible to modulate each device in an array with this structure independently. This work demonstrated a monolayer MoS 2 photodetector based on a buried-gate FET structure whose experimental results showed that both the electrical and photoelectrical properties could be well modulated by a gate voltage as low as 3 V. A photoresponsivity above 1 A W −1 was obtained under a 395 nm light-emitting diode light illumination, which is over 2 orders of magnitude higher than that of a reported back-gate photodetector based on monolayer MoS 2 (7.5 mA W −1 ). The photoresponsivity can be further improved by increasing the buried gate voltage and source-drain voltage. These results are of significance for the practical applications of MoS 2 photodetectors, especially in the low voltage and energy-saving areas.