Gábor J. Béres

Dr. Gábor J. Béres

orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 November 2018 in IOP Conference Series: Materials Science and Engineering
Verified
Conference Paper
Open access
PDF file
GBGábor J. Béres
Gábor J. Béres
MTM Tisza
M Tisza
This study is about using of the least squares' method for parameter defining and model accuracy investigation of mechanical-based work-hardening laws of automotive dual phase steels. The experimental true stress true strain curves were determined by standard, quasistatic tensile tests at room temperature. As most of the commercial finite element codes are using mechanical-based constitutive equations for describing the stress-strain relationship of the materials, the coefficients of these equations are one of the most important input parameters of the simulations. The results show that most of the models are able for data estimation, but the physical meaning of each model parameters is not taking into account by this mathematical technique. The highest of the stress values are observed at Ludwik's solution, while the lowest are given by the Voce model at each steel grades. Although the differences are negligible in the strain range of uniform elongation, but significant discrepancies are displayed at higher strains, which typically occur during sheet forming processes in the press shop. The model parameters' developing in the function of the martensite volume fraction was also considered.

1 January 2018 in AIP Conference Proceedings
Verified
Conference Paper
Closed access
PDF file
GBGábor J. Béres
Gábor J. Béres
Zoltán WeltschZoltán Weltsch
Zoltán Weltsch
ZLZsolt Lukács
Zsolt Lukács
MTMiklós Tisza
Miklós Tisza
Forming limit is a complex concept of limit values related to the onset of local necking in the sheet metal. In cold sheet metal forming, major and minor limit strains are influenced by the sheet thickness, strain path (deformation history) as well as material parameters and microstructure. Forming Limit Curves are plotted in ε1 – ε2 coordinate system providing the classic strain-based Forming Limit Diagram (FLD). Using the appropriate constitutive model, the limit strains can be changed into the stress-based Forming Limit Diagram (SFLD), irrespective of the strain path. This study is about the effect of the hardening model parameters on defining of limit stress values during Nakazima tests for automotive dual phase (DP) steels. Five limit strain pairs were specified experimentally with the loading of five different sheet geometries, which performed different strain-paths from pure shear (−2ε2=ε1) up to biaxial stretching (ε2=ε1). The former works of Hill, Levy-Tyne and Keeler-Brazier made possible some kind of theoretical strain determination, too. This was followed by the stress calculation based on the experimental and theoretical strain data. Since the n exponent in the Nádai expression is varying with the strain at some DP steels, we applied the least-squares method to fit other hardening model parameters (Ludwik, Voce, Hockett-Sherby) to calculate the stress fields belonging to each limit strains. The results showed that each model parameters could produce some discrepancies between the limit stress states in the range of higher equivalent strains than uniaxial stretching. The calculated hardening models were imported to FE code to extend and validate the results by numerical simulations.

1 April 2021 in Acta Materialia Transylvanica
Verified
Journal Article
Open access
PDF file
GBGábor J. Béres
Gábor J. Béres
FVFerenc Végvári
Ferenc Végvári
JDJózsef Danyi
József Danyi
In recent years, the demand for a reduction in pollutant emission has become extremely important in the vehicle industry. It can be achieved through fuel consumption reduction, which is a direct function of the vehicle’s weight. nowadays weight is widely controlled by the use of advanced- and ultra-high strength steels (AHSS and UHSS) in vehicle body construction. With the application of such steel sheets as chassis elements, crashworthiness can be maintained next to reduced sheet thicknesses, too. In this paper, the deep-drawability and springback after V-die bending is monitored for three types of AHSS grades, namely DP600, DP800 and DP1000 materials. The investigations are extended to tailor welded blanks (TWBs), made by the aforementioned steels coupled with a cold rolled steel sheet (DC04). Our results show that deep-drawability reduces with both the increase in strength and the increase in strength difference between the components in the TWBs. Furthermore, the higher strength is shown to cause higher spring-back. The TWBs have unique spring-back behavior around the weld line.

30 December 2023 in International Journal of Engineering and Management Sciences
Verified
Journal Article
Open access
PDF file
MKMartin László Kölüs
Martin László Kölüs
RBRichárd Borbély
Richárd Borbély
DSDániel Gyula Szőke
Dániel Gyula Szőke
GBGábor J. Béres
Gábor J. Béres
This study presents the results of finite element simulations based on different variations of the flow curve of DC04 automotive thin sheet. The aim of our research is to investigate how different flow curve equations affect the variation of sheet thickness in cup drawing tests. In order to exclude other influencing factors in the experiment, both the sheet material and the geometric properties of the specimen, as well as the external state factors were considered to be the same in all cases. The finite element simulations were performed using Simufact 2021.1 software. Our results shows that there are no significant differences in wall thicknesses until we reach the zone of double necking, where essential differences are observed.

19 April 2023 in Materials Research Proceedings
Verified
Conference Paper
Open access
PDF file
RBR. Borbély
R. Borbély
MKM.L. Kölüs
M.L. Kölüs
GBGábor J. Béres
Gábor J. Béres
This study presents a possible stress-based limit theory regarding the wrinkling occurrence of clamped surfaces. There are several theorems that describe the buckling and/or the wrinkling phenomenon in different forms and conditions, but a general description, which would represent the limit state of wrinkling in sheet metal forming still does not exist according to the authors knowledge. This could be particularly important for the finite element simulations that are mostly used for process minoring purposes. However, some software work with body elements is suitable for the representation of wrinkles, users do not receive information about how close a process is to the wrinkling limit, or how it is affected by the input parameters. This is even less estimable if shell, or membrane elements are used in a finite element code. In this work, a purely analytical calculation for the wrinkling limit stress of clamped surfaces is carried out, i.e., when blank holder tool acts on the sheet. To take into consideration the effect of the normal pressure, Wang and Cao’s proposal was used. After expressing the critical stress by its major and minor principal components using anisotropic yield criteria, a novel illustration method of the wrinkling limit has become available and is published in this article.

1 January 2022 in Multidiszciplináris tudományok
Verified
Journal Article
Open access
PDF file
RMRaid Fekhreddine Meknassi
Raid Fekhreddine Meknassi
GBGábor J. Béres
Gábor J. Béres
ZLZsolt Lukács
Zsolt Lukács
In the present work, optimization of near plane strain tensile test specimen for four types of cold-rolled steel DC01, DC04, DP600, and DP1000 are studied using finite element code ABAQUS. The sample width (A), notch radius (R), and material anisotropy (r-value) were the main parameters considered in this study. The effects of these parameters on the Plane Strain State Index (PSSI) and Homogeneity Index (HI) were analyzed and presented.