Low-temperature silver (Ag) sintering is emerging as a cutting-edge die-attach technology for power electronics packaging. However, the industry still has concerns about completely accepting this technology. One of the reasons is a lack of knowledge about the mechanism and process of sintered silver bonding on various metallization. Before, we reported a preliminary assessment of the die-shear strength and microstructures of Si dummy device attached on Ag, Au, and Cu metallization. This research will go deeper into the practice and science of attaching Si and SiC devices with sintered-Ag on substrates with up to seven most widely used metallizations, including electroplated Ag, Ni/Au, and Ni, electroless-plated Ni(P)/Ag, Ni(P)/Au, and Ni(P), and native Cu on DBC substrate. All sintered-Ag die-attach were pressureless in the air at temperatures ranging from 220 °C to 300 °C. The mechanical, electrical, and thermal parameters, as well as the microstructural analyses, were assessed. The purpose of this research is to gain a better understanding by: 1) discussing effects of devices and substrate metallizations on the mechanical, electrical, and thermal characteristics; 2) reviewing fundamental mechanisms of interfacial adhesion for sintered-Ag bonding, and 3) providing practical considerations for developing Si and SiC sintered-Ag die-attaching profiles on the widely used substrate metallization.
21 August 2024 in IEEE Transactions on Components, Packaging and Manufacturing Technology
The GaN HEMT devices have great potential for high-power, high-temperature, and high-frequency applications. However, it is challenging to package GaN HEMTs power module with both low parasitic inductance and thermal resistance, because the lateral GaN HEMTs devices have fast switching speed, high heat-flux density and small die size. This paper made a comprehensive review on the state-of-the-art packaging technologies of GaN HEMTs power modules based on different substrate integration structures, including PCB surface mounting, wire-bonded flip-chip, PCB-embedded, ceramic-substrate integrated, IMS integrated, and hybrid PCB-on-DBC packaging. Each technology has a trade-off among parasitic inductance, thermal performance, and manufacturability. Innovations are still necessary for packaging GaN HEMT modules for their applications in high-frequency and high-power-density converters.1.
11 November 2024 in IEEE Journal of Emerging and Selected Topics in Power Electronics
The low-temperature sintered-silver joining has emerged as an advanced die-attach technology for power electronics packaging. However, the industry still has great misgivings to completely adopt this technology. One of the barriers include the confusion of different properties caused by a variety of commercial paste materials and sintering profiles. It is significant to solve this confusion by giving a conclusion and guidance after careful review, selection, characterization, comparison, and analysis of different Ag pastes and sintering profiles. This study firstly made a comprehensive review of commercial Ag paste materials from global suppliers, and then narrowed down 12 Ag pastes from 7 major suppliers, including Alpha, Henkel, Heraeus, Indium, Kyocera, Namics, and NBE Tech. Afterwards, the Ag pastes were processed and characterized from micro and macro aspects. The mechanical, electrical, thermal, and thermomechanical properties were characterized and compared in terms of the formulations of the nano-Ag, micron-Ag, hybrid-Ag, and resin-reinforced Ag pastes, and whether the sintering profiles require pressure or not. Porosity was used to predict the relationship between micromorphology and macroproperty based on modified Gibson-Ashby scaling law. Finally, conclusions and guidance were provided for high-temperature and high-power-density electronics packaging.
A dual-channel interleaved analog-to-digital converter (ADC) operating at 320 MS/s is prototyped to validate a fast-converging foreground time calibration algorithm that is independent of ADC offset errors. An input polarity switching technique is introduced to eliminate the impact of sub-ADC offset mismatches during foreground time calibration. After foreground calibration, the signal-to-noise and distortion ratio (SNDR) and spurious free dynamic range (SFDR) are improved by 8.6 and 18.4 dB, respectively. In the sub-ADC design, a comparison functionality is enabled in the digital circuits to prevent metastability and expedite data conversion. The single-channel conversion rates reach 160 MS/s. The ADC is implemented via 40-nm digital CMOS technology, achieving a 52.01 dB signal-to-noise plus distortion ratio (SNDR) at near-Nyquist input while sampling at 320 MS/s. The overall power consumption is 3.65 mW, which includes an on-chip reference buffer and a clock circuit.