Low-temperature silver (Ag) sintering is emerging as a cutting-edge die-attach technology for power electronics packaging. However, the industry still has concerns about completely accepting this technology. One of the reasons is a lack of knowledge about the mechanism and process of sintered silver bonding on various metallization. Before, we reported a preliminary assessment of the die-shear strength and microstructures of Si dummy device attached on Ag, Au, and Cu metallization. This research will go deeper into the practice and science of attaching Si and SiC devices with sintered-Ag on substrates with up to seven most widely used metallizations, including electroplated Ag, Ni/Au, and Ni, electroless-plated Ni(P)/Ag, Ni(P)/Au, and Ni(P), and native Cu on DBC substrate. All sintered-Ag die-attach were pressureless in the air at temperatures ranging from 220 °C to 300 °C. The mechanical, electrical, and thermal parameters, as well as the microstructural analyses, were assessed. The purpose of this research is to gain a better understanding by: 1) discussing effects of devices and substrate metallizations on the mechanical, electrical, and thermal characteristics; 2) reviewing fundamental mechanisms of interfacial adhesion for sintered-Ag bonding, and 3) providing practical considerations for developing Si and SiC sintered-Ag die-attaching profiles on the widely used substrate metallization.
21 August 2024 in IEEE Transactions on Components, Packaging and Manufacturing Technology
The GaN HEMT devices have great potential for high-power, high-temperature, and high-frequency applications. However, it is challenging to package GaN HEMTs power module with both low parasitic inductance and thermal resistance, because the lateral GaN HEMTs devices have fast switching speed, high heat-flux density and small die size. This paper made a comprehensive review on the state-of-the-art packaging technologies of GaN HEMTs power modules based on different substrate integration structures, including PCB surface mounting, wire-bonded flip-chip, PCB-embedded, ceramic-substrate integrated, IMS integrated, and hybrid PCB-on-DBC packaging. Each technology has a trade-off among parasitic inductance, thermal performance, and manufacturability. Innovations are still necessary for packaging GaN HEMT modules for their applications in high-frequency and high-power-density converters.1.
11 November 2024 in IEEE Journal of Emerging and Selected Topics in Power Electronics
The low-temperature sintered-silver joining has emerged as an advanced die-attach technology for power electronics packaging. However, the industry still has great misgivings to completely adopt this technology. One of the barriers include the confusion of different properties caused by a variety of commercial paste materials and sintering profiles. It is significant to solve this confusion by giving a conclusion and guidance after careful review, selection, characterization, comparison, and analysis of different Ag pastes and sintering profiles. This study firstly made a comprehensive review of commercial Ag paste materials from global suppliers, and then narrowed down 12 Ag pastes from 7 major suppliers, including Alpha, Henkel, Heraeus, Indium, Kyocera, Namics, and NBE Tech. Afterwards, the Ag pastes were processed and characterized from micro and macro aspects. The mechanical, electrical, thermal, and thermomechanical properties were characterized and compared in terms of the formulations of the nano-Ag, micron-Ag, hybrid-Ag, and resin-reinforced Ag pastes, and whether the sintering profiles require pressure or not. Porosity was used to predict the relationship between micromorphology and macroproperty based on modified Gibson-Ashby scaling law. Finally, conclusions and guidance were provided for high-temperature and high-power-density electronics packaging.
It is important to reduce both the size and parasitic of power modules when designing a layout. However, the layout design often relies on experience and was time‐consuming. The problem is particularly prominent in silicon carbide (SiC) modules, which requires more parallel dye compared with silicon counterparts. In this study, an algorithm for multi‐chip SiC module layout design automation is proposed, which combines genetic algorithm, candidate searching idea, parallel operation and simplified evaluation models for enhancing computational efficiency with reasonable accuracy. A 12‐chip half bridge SiC module is studied to verify the feasibility of the proposed method. The results indicate the method is robust and efficient, and can generate optimal layouts with low parasitic inductance and resistance as well as small footprint. It is believed that the method is feasible to guide the automatic optimal layout design for multi‐chip SiC modules, targeting small footprint and low parasitic.
1 October 2020 in IEEE Journal of Emerging and Selected Topics in Power Electronics
In this paper, pressureless sintering of nanosilver paste is proposed to enhance the reliability of wire-bonds with SiC chips by both alleviating thermo-mechanical stresses and enhancing thermal coupling of bonding wires and chips. A multichip 1200-V/300-A SiC hybrid module with six Si IGBTs and twelve SiC Schottky Barrier Diodes (SBDs) is demonstrated. The lifetime of the wire-bonds with the SiC SBD bonded by the pressureless sintered nanosilver is 27.9% longer than that by the high-temperature solder under the power cycling with the constant temperature swing. The lifetime of the wire-bonds with the IGBT also bonded by the pressureless sintered nanosilver is 46.2% longer than that by the high-temperature solder under the power cycling with the constant conduction current. Furthermore, not only the cost of 1700-V SiC SBDs is quite similar with that of 1200-V ones, but also the leakage current of the 1200-V/300-A SiC hybrid module can be reduced greatly using 1700-V SiC SBDs as free-wheeling diodes instead of regular 1200-V ones. Considering the much larger leakage current of a SiC SBD compared to that of a Si PiN diode. It is feasible to use a SiC SBD with the higher blocking voltage to reduce the significant leakage current of the free-wheeling SBD with almost no cost increase.
24 September 2024 in IEEE Transactions on Power Electronics
The low-temperature silver sintering technology has been increasingly applied for die-attach in power electronics modules. Most reported studies of the technology involved bonding on silver (Ag) or gold (Au) surface finish. Compared to Ag or Au, electroless nickel (phosphorus) or Ni(P) is a cost-effective and widely-used process for surface-finishing module substrates. However, there is a lack of studies on sintered-Ag bonding on the Ni(P) surface. In this study, IGBT devices were bonded using pressureless Ag-sintering on electroless Ni(P)-plated substrates. Micromorphologies and macro-properties were then characterized before and after three reliability tests including high temperature storage life (HTSL), steady-state temperature-humidity bias life (STHBL), and temperature cycling (TC) tests. The as-sintered joints measured strong adhesion of 39 MPa, resulting from Ag-NiO-Ni chemical bonds across the (111) crystal planes with reduced lattice misfit. The Ag-Ni(P) joints exhibited high reliability under high-temperature and thermo-mechanical stress in the HTSL and TC tests, but performed poorly when exposed to high humidity in the STHBL test. The founding in this study helps understand the physical nature of bonding between sintered-Ag and Ni(P), and its failure mechanisms under the influence of different physical stresses.