Laser vibrometers are known for their high precision, long-range capabilities, and non-contact measurement characteristics. However, in long-range applications, spike noise often arises, primarily due to the laser speckle effect induced by rough targets. To address this challenge, this paper develops a light field transmission model for laser vibrometers. By exploiting the differences in speckle patterns formed by lasers of different wavelengths on the same rough target, a dual-wavelength laser vibrometry technique utilizing wavelength division multiplexing devices is proposed, along with a dual-channel signal enhancement method based on orthogonal demodulation. This approach effectively reduces the likelihood of spike noise and enhances the system’s velocity measurement resolution. The experimental results demonstrate that, compared to the single-wavelength system, the dual-wavelength system significantly suppresses laser speckle noise, mitigates measurement spike noise, and improves the stability of micro-vibration measurements. Additionally, the system’s velocity resolution improves from 0.165 μm/s/Hz1/2 in the single-wavelength system to 0.122 μm/s/Hz1/2 in the dual-wavelength system, thereby enhancing the system’s sensitivity to micro-vibrations. In engineering applications, the dual-wavelength approach provides higher stability and resolution for micro-vibration signal measurements.
The Laser Doppler Vibrometer (LDV) is widely used in precision vibration measurement due to its non-contact nature and high accuracy. However, when measuring non-cooperative targets, the internal stray light in the LDV interferes with the target’s return light, creating competition with the reference light, a phenomenon known as interference competition. This issue is particularly prominent in integrated transceiver LDV systems, where the backscattered light from the lens can be comparable in intensity to the target’s return light, significantly degrading phase extraction accuracy and limiting the LDV’s applicability. To address this challenge, this paper proposes a noise suppression algorithm based on the In-phase and Quadrature (IQ) demodulation. The algorithm uses the power spectrum within each frame’s relevant frequency band as an evaluation metric and employs the Three-point Probe Extremum Localization (3P-PEL) method to estimate the amplitude and phase of the stray light interference with the reference light in real time. This enables the accurate extraction of the interference signal between the measurement light and the reference light. Both simulations and experiments validate the effectiveness of the proposed method. The simulation results demonstrate that when the stray-to-measurement power ratio is below 0.25, the proposed algorithm can suppress spurious signals induced by multi-beam interference by more than 25 dB, while experimental results show it can reduce such signals below the LDV’s noise floor in various motion scenarios. The proposed algorithm holds potential applications in laser interferometry and effectively enhances LDV measurement accuracy.
In optical sensing, signal demodulation often degrades fine spectral data, particularly in spectroscopic measurements affected by Doppler noise, aliasing, and circuit noise. Existing algorithms often fall short in addressing these issues effectively, as they either necessitate complex parameter tuning and extensive expertise or are limited to handling simple spectral signals. To address these challenges, this study proposes an adaptive spectral extraction algorithm combining Variational Mode Decomposition (VMD) and Savitzky-Golay (SG) filtering. The algorithm optimizes parameters through an innovative adaptation strategy. By analyzing key parameters such as SG frame length, order, and VMD mode number, it leverages signal time-domain and frequency spectrum information to adaptively determine the optimal VMD modes and SG order, ensuring effective noise suppression and feature preservation. Validated through simulations and experiments, the method significantly enhances spectral signal quality by restoring absorption peaks and eliminating manual parameter adjustments. This work provides a robust solution for improving measurement accuracy and reliability in optical sensing instrumentation, particularly in applications involving complex spectral analysis.
Random scattering from a rough target surface causes a random phase distribution in the echo light field of a laser Doppler vibrometer (LDV), which in turn affects the interference between the echo light and the reference light. Based on related theories including Gaussian beam propagation and rough surface modeling, theoretical models for light field propagation, random target scattering, and interference intensity were established. Numerical simulation was conducted for a typical application scenario with a laser wavelength of 1550 nm, and a measurement distance of 1 m was used to investigate the effects of transceiver optical system parameters and wavefront aberrations on system performance. The results indicate that both the F-number of the transceiver lens and the wavefront aberrations have a significant impact on the average interference intensity. Under rough target conditions, to achieve a higher average interference intensity, the designed F-number of the transceiver lens should be approximately 70–85% of the F-number of the focusing lens. Regarding wavefront aberrations, defocus, primary astigmatism, primary spherical aberration, and secondary astigmatism have a more significant effect on the average interference intensity. For applications involving rough targets, the design tolerance values for the Zernike coefficients of these four aberrations are all higher than those for mirror-finished targets. For these four aberrations, the design tolerance values for ground surfaces are increased by 16.7–66.7%, while the design tolerance values for milled surfaces are increased by 11.1–66.7%, effectively reducing the difficulty of lens design. The results of this study provide a theoretical reference for the design of optical system parameters in LDV and other coherent detection systems.
Conventional pinhole point-diffraction interferometers (PPDIs) owe their popularity to a simple configuration, but that same configuration limits both the usable measurement aperture and the load the phase shifter can carry. Here, we propose a heterodyne phase-shifting point-diffraction interferometer (HPDI) based on dual-cascaded acousto-optic modulators (AOMs), which removes both limitations while keeping the configuration compact. The dual-cascaded AOM module integrates the functions of frequency shifting, beam splitting, and contrast modulation. By modulating its input RF power, the interference contrast can be flexibly adjusted. Simulation and experimental results verify the feasibility of the proposed HPDI, which achieves a measurement repeatability of 0.045 nm (RMS, with piston, tilt, and defocus removed) and agrees with an absolute shift-rotation calibration to within 3.3 nm (RMS).