Spectral measurement technology has found extensive applications across a diverse range of fields, including chemical analysis, environmental monitoring, precise measurement, and laser frequency stabilization. However, the accuracy of spectral measurement results is often constrained by the power noise and frequency jitter inherent in the light source. In contrast to the traditional differential amplification method for acquiring spectral signals, our study introduces a novel approach. By employing a power correction quotient, we effectively suppress common-mode noise. Additionally, we introduce a novel composite differential method that, in theory, is capable of performing closed-loop processing on spectral signals to stabilize the laser frequency. This innovative method not only constructs a stable laser source but also yields high-quality spectral signals simultaneously. In an experiment involving iodine molecule absorption spectroscopy, the algorithm we propose demonstrated remarkable efficacy in mitigating distortions caused by modulated signals and significantly enhanced the signal-to-noise ratio. This algorithm is versatile and can be applied to the signal processing of any spectral signal sensor that employs dual-path light.
In optical sensing, signal demodulation often degrades fine spectral data, particularly in spectroscopic measurements affected by Doppler noise, aliasing, and circuit noise. Existing algorithms often fall short in addressing these issues effectively, as they either necessitate complex parameter tuning and extensive expertise or are limited to handling simple spectral signals. To address these challenges, this study proposes an adaptive spectral extraction algorithm combining Variational Mode Decomposition (VMD) and Savitzky-Golay (SG) filtering. The algorithm optimizes parameters through an innovative adaptation strategy. By analyzing key parameters such as SG frame length, order, and VMD mode number, it leverages signal time-domain and frequency spectrum information to adaptively determine the optimal VMD modes and SG order, ensuring effective noise suppression and feature preservation. Validated through simulations and experiments, the method significantly enhances spectral signal quality by restoring absorption peaks and eliminating manual parameter adjustments. This work provides a robust solution for improving measurement accuracy and reliability in optical sensing instrumentation, particularly in applications involving complex spectral analysis.
Conventional pinhole point-diffraction interferometers (PPDIs) owe their popularity to a simple configuration, but that same configuration limits both the usable measurement aperture and the load the phase shifter can carry. Here, we propose a heterodyne phase-shifting point-diffraction interferometer (HPDI) based on dual-cascaded acousto-optic modulators (AOMs), which removes both limitations while keeping the configuration compact. The dual-cascaded AOM module integrates the functions of frequency shifting, beam splitting, and contrast modulation. By modulating its input RF power, the interference contrast can be flexibly adjusted. Simulation and experimental results verify the feasibility of the proposed HPDI, which achieves a measurement repeatability of 0.045 nm (RMS, with piston, tilt, and defocus removed) and agrees with an absolute shift-rotation calibration to within 3.3 nm (RMS).
Random scattering from a rough target surface causes a random phase distribution in the echo light field of a laser Doppler vibrometer (LDV), which in turn affects the interference between the echo light and the reference light. Based on related theories including Gaussian beam propagation and rough surface modeling, theoretical models for light field propagation, random target scattering, and interference intensity were established. Numerical simulation was conducted for a typical application scenario with a laser wavelength of 1550 nm, and a measurement distance of 1 m was used to investigate the effects of transceiver optical system parameters and wavefront aberrations on system performance. The results indicate that both the F-number of the transceiver lens and the wavefront aberrations have a significant impact on the average interference intensity. Under rough target conditions, to achieve a higher average interference intensity, the designed F-number of the transceiver lens should be approximately 70–85% of the F-number of the focusing lens. Regarding wavefront aberrations, defocus, primary astigmatism, primary spherical aberration, and secondary astigmatism have a more significant effect on the average interference intensity. For applications involving rough targets, the design tolerance values for the Zernike coefficients of these four aberrations are all higher than those for mirror-finished targets. For these four aberrations, the design tolerance values for ground surfaces are increased by 16.7–66.7%, while the design tolerance values for milled surfaces are increased by 11.1–66.7%, effectively reducing the difficulty of lens design. The results of this study provide a theoretical reference for the design of optical system parameters in LDV and other coherent detection systems.