Per- and polyfluoroalkyl substances (PFAS), also known as forever chemicals, exhibit exceptional chemical stability and resistance to environmental degradation thanks to their strong C-F bonds and nonpolar nature. However, their widespread use and persistence have a devastating impact on the environment. This review examines the roles of PFAS in tribological applications, specifically in lubricants and lubricating systems. This article focuses on conventional and advanced lubricants, including ionic liquids (ILs) and their use in modern automotive vehicles. The objective of this paper is to provide a comprehensive overview of the adverse impacts of PFAS whilst acknowledging their outstanding performance in surface coatings, composite materials, and as additives in oils and greases. The pathways through which PFAS are introduced into the environment via lubricating systems such as in seals and O-rings are identified, alongside their subsequent dispersion routes and the interfaces across which they interact. Furthermore, we examine the toxicological implications of PFAS exposure on terrestrial and aquatic life forms, including plants, animals, and humans, along with the ecological consequences of bioaccumulation and biomagnification across trophic levels and ecosystems. This article ends with potential remediation strategies for PFAS use, including advanced treatment technologies, biodegradation, recovery and recycling methods, and the search for more environmentally benign alternatives.

Molybdenum disulfide (MoS₂) has been used in a variety of lubrication products due to its highly tunable surface chemistry. However, the performance of MoS₂-derived tribofilms falls short when compared to other commercially available antiwear additives. The primary objective of this study is to improve the tribological performance of MoS₂ as an additive for lithium-based greases. This was achieved by functionalizing the particle with hydrophilic molecules, such as urea. Experimental results indicate that the urea-functionalized MoS₂ (U-MoS₂) leads to a notable decrease in the coefficient of friction of 22% and a substantial reduction in the wear rate of 85% compared to its unmodified state. These results are correlated with the density functional theory (DFT) calculation of U-MoS₂ to theorize two mechanisms that explain the improved performance. Urea has the capability to reside both on the surface of MoS₂ and within its interlayer spacing. Weakened van der Waals forces due to interlayer expansion and the hydrophilicity of the functionalized U-MoS₂ surface are catalysts for both friction reduction and the longevity of tribofilms on hydrophilic steel surfaces. These findings offer valuable insights into the development of a novel class of lubricant additives using functionalized hydrophilic molecules.

The transition to electric vehicles (EVs) has introduced new challenges in lubrication, demanding innovative solutions to ensure consistent performance. One promising approach is the use of nanoparticle additives, which have the potential to improve lubrication performance significantly. However, achieving a stable suspension of these nanoparticles in lubricating oils remains a critical challenge, as suspension stability is essential for maintaining consistent performance and maximizing the benefits of these advanced additives. In this study, carbon nanoparticles (CNPs) were modified with dodecylamine (DDA) to achieve stable suspension in nonpolar fluids. The successful functionalization was confirmed by the FTIR results, which showed characteristic peaks of various bonding. The suspension stability tests demonstrated that DDA-CNPs remained suspended for over 60 days in the Polyalphaolefin (PAO) oil, whereas unmodified CNPs were sedimented within 3–7 days. The rheological behavior was measured under different shear rates and temperatures. Viscosity measurements indicated that DDA-CNPs maintained a lower value compared to base PAO. The lubricants’ friction coefficient (COF) was also determined under various speeds and loads. The addition of DDA-CNPs at a concentration of 0.05 wt.% resulted in a significant reduction in COF, with values decreasing by 26% compared to base PAO oil under a load of 1 N. Additionally, the COF for DDA-CNPs was consistently lower than that of PAO, with reductions ranging from 15% to 18% across all tested speeds. The Stribeck curve further highlighted the improved performance of DDA-CNPs across boundary, mixed, and hydrodynamic lubrication regimes. These findings suggest that DDA-CNPs significantly improve the lubrication performance of PAO oil, making them suitable for advanced lubrication applications in automotive and industrial systems.