Ultrasonic (USC) treatments have been applied to starches, flours and grains to modify their physicochemical properties and improve their industrial applicability. The extent of the modification caused by USC treatment depends on the treatment conditions and the natural characteristics of the treated matter. Cavitation leads to structural damage and fragmentation and partial depolymerization of starch components. The amorphous regions are more susceptible to being disrupted by ultrasonication, while the crystalline regions require extended USC exposure to be affected. The increased surface area in USC-treated samples has a higher interaction with water, resulting in modification of the swelling power, solubility, apparent viscosity, pasting properties and gel rheological and textural properties. Starch digestibility has been reported to be modified by ultrasonication to different extents depending on the power applied. The most important treatment variables leading to more pronounced modifications in USC treatments are the botanical origin of the treated matter, USC power, time, concentration and temperature. The interaction between these factors also has a significant impact on the damage caused by the treatment. The molecular rearrangement and destruction of starch structures occur simultaneously during the USC treatment and the final properties of the modified matrix will depend on the array of treatment parameters. This review summarizes the known effects of ultrasonic treatments in modifying starches, flours and grains.

Tef [Eragrostis tef (Zucc.) Trotter] flour is a gluten-free cereal rich in fiber, minerals, vitamins, and antioxidants, which offers a promising alternative for new food development. This study investigated the effect of microwave radiation (MW) on the techno-functional, thermal, rheological and microstructural properties of tef flours. White and brown tef grains were milled and microwaved at different moisture contents (MC) (15%, 20% and 25%) for a total irradiation time of 480 s. The morphological structure of tef flours was affected by MW treatment, and its particle size and hydration properties increased after the treatment. Lower peak, breakdown, and setback viscosities, up to 45%, 96%, and 67% below those of the control (untreated) samples, and higher pasting temperature, up to 8 °C in the 25% MC samples, were observed. From FTIR analysis a disruption of short-range molecular order was concluded, while DSC confirmed an increased stability of starch crystallites. Rheological analysis of the gels made from the treated samples revealed that MW had a structuring and stabilizing effect on all samples, leading to higher viscoelastic moduli, G′ and G″, and the maximum stress the gels withstood before breaking their structure, τ_max. The MC of the flours during the MWT drove the modification of the techno-functional properties of the tef flours and the gel rheological and thermal characteristics. These results suggest that MW-treated tef flours are potential ingredients for improving the technological, nutritional and sensory quality of food products.

Microwave-assisted heat moisture treatment (MWT) was applied to quinoa grains, a nutritious gluten-free pseudocereal of great interest in food product development, to achieve the physical modification of the quinoa flour. The effect of treating quinoa grains at different initial water contents (WC; 10%, 20%, and 30%) in two operational systems was compared: one open at atmospheric pressure and variable WC (V system), and the other in hermetic containers at constant WC (C system). The morphological structure of the obtained flours and their techno-functional, rheological, and thermal properties were evaluated. MWT proved to be effective in modifying these properties, the main effects probably being caused by protein denaturation and aggregation, and intragranular molecular rearrangements of starch, with disruption of short-range molecular order and even the partial collapse of starch granules in the samples treated at the highest WC. The greatest differences were observed for the 20 and 30% WC treated-samples, particularly when using C system, which increased their water absorption capacity and decreased their foaming, emulsion, and gel-forming capacities. Based on these results, the control of WC and its evolution during MWT of quinoa grains appears to be a viable and effective approach to adapt flour functionality to the needs of food production, allowing a wider range of flour properties depending on the MWT conditions.

Bread is a widely consumed food that has often been used as a vehicle for functional ingredients such as dietary fibre. Fibre-rich breads have beneficial physiological effects on health, helping to combat chronic pathologies such as cardiovascular disease, diabetes, and certain types of colon cancer. The aim of this study is to evaluate the technological and nutritional effects of the inclusion of buckwheat hull particles (BH) at two addition levels (3 and 6%) and two particle sizes (fine, D₅₀: 62.7 μm; coarse, D₅₀: 307 μm) in a gluten-free (GF) bread formulation. A significant (p < 0.05) increase in the dough elastic modulus (G’) was observed for all doughs containing BH, from 712 Pa for a rice-based dough to 1027–3738 Pa for those containing BH. Compared to rice-based breads, those containing BH showed a significant (p < 0.05) increase in total dietary fibre content (from three to five times) and in antioxidant capacity (from 78 to 290 mg TE/100 g dw. in the ORAC test). Breads containing fine BH at a level of 3% had similar sensory properties to the rice-based bread, demonstrating that it is possible to improve the TDF content while maintaining the sensory quality of the GF bread.

Tef is currently being incorporated into a wide range of foodstuff due to its high nutritional profile. This study tries to fill the information gap on the effect of tef varieties on physico-chemical, nutritional and sensorial quality of gluten-free bread. Maize starch replacement at 50, 75 and 100 g/100 g level by tef flour from three Ethiopian varieties (DZ-Cr-37, DZ-Cr-387 and DZ-01-99) resulted in viable gluten-free breads with acceptable sensory properties, higher mineral content and lower glycemic response. Tef cultivar type and blending level significantly affected bread quality. The 50% and 75% substitution levels and the DZ-Cr-37 variety led to the highest bread volumes with the lowest firmness. Breads made with DZ-01-99 variety were darker and with more reddish crust and crumb hues than those made with the other varieties. Breads from 100% DZ-Cr-37 achieved the highest hedonic scores for color, odor, taste and texture. The Ca, Fe and Mg contents of the breads made with 100% tef were 13, 40 and 30 times, respectively, higher than those of the control bread (100% maize starch), indicating tef could be used as an excellent source of these important minerals. In addition, the rapidly digestible starch content decreased up to 28% in breads fortified with tef flour.

The modification of flours by ultrasound (US) treatments requires excess water to suspend the sample to be treated, which must be removed after treatment to recover the ultrasonicated flour. The aim of this study was to determine the influence that the water removal method has on the final characteristics of US-treated gluten-free flours (rice, brown tef, corn and quinoa). US treatment parameters were constant, and two water removal methods were studied: freeze-drying and centrifugation + drying. The elimination of water by centrifugation resulted in the loss of solubilized compounds from the treated flours, which led to important differences between the final characteristics of US-treated flours. Ultrasonication resulted in the reduction of flours’ particle size and modification of their color parameters. Techno-functional properties were modified by US treatment, where the water removal method was more influential in whole grain samples (brown tef and quinoa). Few differences were found in thermal properties among pairs of US-treated samples, indicative that the effect caused to starch was mainly attributed to ultrasonication conditions than to the drying method. The water removal method markedly influenced the pasting properties of US-treated flours, resulting in lower profiles when freeze-drying was applied and higher profiles when flours were retrieved by centrifugation. Gels made with tef, corn and quinoa presented reduced tan(δ)₁ values after sonication, while gels made with rice did not show any modification. The water removal method is a decisive step in US treatments, defining the final characteristics of the treated matter, and having a great influence in the modification attributed to ultrasonication.