3D integration is a key solution to the predicted performance problems of future ICs as well as it offers extreme miniaturization and cost-effective fabrication of so-called more than Moore products as e.g. MEMS/IC systems. Through silicon via (TSV) technologies enable high interconnect performance at relatively high fabrication cost compared to 3D packaging. In general it is not only one 3D integration technology suitable for the fabrication of the large variety of 3D integrated systems. Moreover, even one single product may need several different technologies for a cost-effective fabrication. Wireless sensor systems (e.g. e-CUBESreg) an excellent example for the need of a suitable mixture. Consisting of MEMS, ICs, memories, antennas and power modules they can only be fabricated in a cost-efficient way by application of specific optimized 3D technologies for the integration of the different sub-modules. The technology choice for an e-CUBES demonstrator is described.
Hybrid materials based on inorganic particles and an organic polymer were developed and used as an efficient sensing material for carbon dioxide (CO2). The sensing material consists of fumed silica that is functionalized with an organic polymer, polyethylenimine, by means of the impregnation method. The organic polymer is effectively immobilized around the silica nanoparticles and confirmed by infrared spectroscopy. Thermogravimetric analysis proves the thermal stability of the sensing material. CO2 capacitive sensors operating at temperatures lower than 70 °C were fabricated by depositing a thin layer of hybrid sensing material on interdigitated gold electrodes. Impedance spectroscopy explored the sensing capability of the hybrid organic–inorganic material towards CO2 in the presence of different relative humidity levels, as well as its stability and reversibility. This strategy to couple organic and inorganic materials as a sensing layer for CO2 paves the way for the design of a low-cost CO2 sensor.
The objective of the present paper is to provide a concept for a chemical sensor having a small size, a low power consumption and a high reliability for sensing CO2 under different humidity levels at atmospheric pressure, while maintaining a long term stability under working conditions. A high temperature regeneration process of the sensing layer is unneeded to ensure a long term stability of the sensing material. This objective is achieved by using a hybrid organic-inorganic nanomaterial, consisting of inorganic nanoparticles functionalized with an amine-based polymer.
To realize profitable applications with 2D-materials the transition from research scale to microelectronic fabrication methods is needed. This means the use of equipment for larger substrates and assessment of the process flows. In this study we demonstrate an effective way to assess MoS2 as semiconducting material, deposited with the lower priced precursors Mo(CO)6 and H2S on 200 mm silicon wafers. We could show how the evolution of layer quality develops depending on temperature and interface pretreatment. It is not possible to achieve mono-layers of 0.6 nm with high quality due to seeding kinetics and mechanism. In contrast, layers with thicknesses above 3 nm have suitable electrical and optical qualities to proceed with the design of active devices on 200 mm wafers.