Anaerobic digestion is a promising alternative to valorize agrifood wastes, which is gaining interest under an environmental sustainability overview. The present research aimed to compare anaerobic digestion with olive pomace oil extraction, by using life cycle assessment, as alternatives for the valorization of the olive mill solid waste generated in the centrifugation process with a two-outlet decanter from oil mills. In the case of olive pomace oil extraction, two cases were defined depending on the type of fuel used for drying the wet pomace before the extraction: natural gas or a fraction of the generated extracted pomace. The anaerobic digestion alternative consisted of the production of biogas from the olive mill solid waste, heat and electricity cogeneration by the combustion of the generated biogas, and composting of the anaerobic digestate. The life cycle assessment showed that anaerobic digestion was the best alternative, with a global environmental impact reduction of 88.1 and 85.9% respect to crude olive pomace oil extraction using natural gas and extracted pomace, respectively, as fuel.

This article presents a regeneration method of a sodium hydroxide (NaOH) solution from a biogas upgrading unit through calcium carbonate (CaCO₃) precipitation as a valuable by-product, as an alternative to the elevated energy consumption employed via the physical regeneration process. The purpose of this work was to study the main parameters that may affect NaOH regeneration using an aqueous sodium carbonate (Na₂CO₃) solution and calcium hydroxide (Ca(OH)₂) as reactive agent for regeneration and carbonate slurry production, in order to outperform the regeneration efficiencies reported in earlier works. Moreover, Raman spectroscopy and Scanning Electron Microscopy (SEM) were employed to characterize the solid obtained. The studied parameters were reaction time, reaction temperature, and molar ratio between Ca(OH)₂ and Na₂CO₃. In addition, the influence of small quantities of NaOH at the beginning of the precipitation process was studied. The results indicate that regeneration efficiencies between 53%–97% can be obtained varying the main parameters mentioned above, and also both Raman spectroscopy and SEM images reveal the formation of a carbonate phase in the obtained solid. These results confirmed the technical feasibility of this biogas upgrading process through CaCO₃ production.