Maria Censabella

Dr. Maria Censabella


Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
24 January 2019 in Coatings
Verified
Journal Article
Open access
PDF file
VTVanna Torrisi
Vanna Torrisi
MCMaria Censabella
Maria Censabella
GPGiovanni Piccitto
Giovanni Piccitto
Giuseppe CompagniniGiuseppe Compagnini
Giuseppe Compagnini
Maria Grazia GrimaldiMaria Grazia Grimaldi
Maria Grazia Grimaldi
Francesco RuffinoFrancesco Ruffino
Francesco Ruffino
Pd and Pt nanoparticles on Fluorine-doped tin oxide (FTO) are produced. This outcome is reached by processing nanoscale-thick Pd and Pt films deposited on the FTO surface by nanosecond laser pulse. Such laser processes are demonstrated to initiate a dewetting phenomenon in the deposited metal films and lead to the formation of the nanoparticles. In particular, the effect of the film’s thickness on the mean size of the nanoparticles, when fixed the laser fluence, is studied. Our results indicate that the substrate topography influences the dewetting process of the metal films and, as a consequence, impacts on the nanoparticle characteristics. The results concerning the Pd and Pt nanoparticles’ sizes versus starting films thickness and substrate topography are discussed. In particular, the presented discussion is based on the elucidation of the effect of the substrate topography effect on the dewetting process through the excess of chemical potential. Finally, Raman analysis on the fabricated samples are presented. They show, in particular for the case of the Pd nanoparticles on FTO, a pronounced Raman signal enhancement imputable to plasmonic effects.

31 October 2020 in Micromachines
Verified
Journal Article
Open access
PDF file
ASAntonella Laura Sortino
Antonella Laura Sortino
MCMaria Censabella
Maria Censabella
GMGabriella Munzi
Gabriella Munzi
SBSimona Boninelli
Simona Boninelli
VPVittorio Privitera
Vittorio Privitera
Francesco RuffinoFrancesco Ruffino
Francesco Ruffino
Nowadays, Au nanoparticles (AuNPs) capture great interest due to their chemical stability, optical properties, and biocompatibility. The success of technologies based on the use of AuNPs implies the development of simple synthesis methods allowing, also, the fine control over their properties (shape, sizes, structure). Here, we present the AuNPs fabrication by nanosecond pulsed laser ablation in citrate-solution, that has the advantage of being a simple, economic and eco-sustainable method to fabricate colloidal solutions of NPs. We characterized the stability and the absorbance of the solutions by Ultraviolet-Visible (UV-Vis) spectroscopy and the morphology of the AuNPs by Transmission Electron Microscopy. In addition, we used the AuNPs solutions as colorimetric sensor to detect the amount of glyphosate in liquid. Indeed, glyphosate is one of the most widely used herbicides which intensive use represents a risk to human health. The glyphosate presence in the colloidal AuNPs solutions determines the aggregation of the AuNPs causing the change in the color of the solution. The variation of the optical properties of the colloidal solutions versus the concentration of glyphosate is studied.

16 December 2019 in Nanomaterials
Verified
Journal Article
Open access
PDF file
Antonino ScandurraAntonino Scandurra
Antonino Scandurra
Francesco RuffinoFrancesco Ruffino
Francesco Ruffino
MCMaria Censabella
Maria Censabella
Antonio TerrasiAntonio Terrasi
Antonio Terrasi
Maria Grazia GrimaldiMaria Grazia Grimaldi
Maria Grazia Grimaldi
Non-enzymatic electrochemical glucose sensing was obtained by gold nanostructures on graphene paper, produced by laser or thermal dewetting of 1.6 and 8 nm-thick Au layers, respectively. Nanosecond laser annealing produces spherical nanoparticles (AuNPs) through the molten-phase dewetting of the gold layer and simultaneous exfoliation of the graphene paper. The resulting composite electrodes were characterized by X-ray photoelectron spectroscopy, cyclic voltammetry, scanning electron microscopy, micro Raman spectroscopy and Rutherford back-scattering spectrometry. Laser dewetted electrode presents graphene nanoplatelets covered by spherical AuNPs. The sizes of AuNPs are in the range of 10–150 nm. A chemical shift in the XPS Au4f core-level of 0.25–0.3 eV suggests the occurrence of AuNPs oxidation, which are characterized by high stability under the electrochemical test. Thermal dewetting leads to electrodes characterized by faceted not oxidized gold structures. Glucose was detected in alkali media at potential of 0.15–0.17 V vs. saturated calomel electrode (SCE), in the concentration range of 2.5μM−30 mM, exploiting the peak corresponding to the oxidation of two electrons. Sensitivity of 1240 µA mM−1 cm−2, detection limit of 2.5 μM and quantifications limit of 20 μM were obtained with 8 nm gold equivalent thickness. The analytical performances are very promising and comparable to the actual state of art concerning gold based electrodes.

1 February 2022 in Micromachines
Verified
Journal Article
Open access
PDF file
SBStefano Boscarino
Stefano Boscarino
MCMaria Censabella
Maria Censabella
MMMelanie Micali
Melanie Micali
MRMarco Russo
Marco Russo
Antonio TerrasiAntonio Terrasi
Antonio Terrasi
Francesco RuffinoFrancesco Ruffino
Francesco Ruffino
Herein, Cu nanostructures are obtained by solid-state dewetting of 9 nm copper layer (dry) or by ablating copper target, using a nanosecond pulsed laser at 1064 nm, in acetone and isopropyl alcohol (wet). The Cu nanostructures are embedded in aluminum-doped zinc oxide layer. Then, the electrical, optical, and morphological properties of the two kinds of systems, as a function of their synthesis parameters, are investigated. The aim is to compare the two fabrication methods and select the main conditions to achieve the best system for photovoltaic applications. The main differences, exhibited by the wet and dry processes, were in the shape and size of the Cu nanostructures. Dewetting in nitrogen produces faceted nanoparticles, with an average size below 150 nm, while laser ablation originates spherical and smaller nanoparticles, below 50 nm. Dry system underwent to thermal annealing, which improves the electrical properties, compared to the wet system, with a sheet resistance of 103 vs. 106 Ω/sq, respectively; finally, the dry system shows a maximum transmittance of 89.7% at 697 nm, compared to the wet system in acetone, 88.4% at 647 nm, as well as in isopropyl alcohol, 86.9% at 686 nm. Moreover, wet systems show higher transmittance in NUV.

14 November 2017 in Physica Status Solidi (a)
Verified
Journal Article
Closed access
PDF file
MCMaria Censabella
Maria Censabella
FRFrancesco Ruffino
Francesco Ruffino
MZMassimo Zimbone
Massimo Zimbone
EBElena Bruno
Elena Bruno
MGMaria G. Grimaldi
Maria G. Grimaldi

21 July 2021 in Micromachines
Verified
Journal Article
Open access
PDF file
MCMaria Censabella
Maria Censabella
CDCristina Drago
Cristina Drago
BCbrunella cafra
brunella cafra
PBPaolo Badalà
Paolo Badalà
ABAnna Bassi
Anna Bassi
Francesco RuffinoFrancesco Ruffino
Francesco Ruffino
In this work, an investigation of the properties of nanoscale-thick Ti/TiN, TiN, W, WN layers as diffusion barriers between Si and Al is carried out in view of Si-based electronic applications. Heat treatments were performed on the samples to activate interdiffusion between Si and Al. Changing annealing time and temperature, each sample was morphologically characterized by scanning electron microscopy and atomic force microscopy and compositionally characterized by Rutherford backscattering analysis. The aim is to evaluate the efficiency of the layers as diffusion barriers between Si and Al and, at the same time, to evaluate the surface morphological changes upon annealing processes.