Stefano Boscarino

Dr. Stefano Boscarino


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
Verified
Journal Article
Open access
PDF file
SBStefano Boscarino
Stefano Boscarino
Valentina IaconoValentina Iacono
Valentina Iacono
AMAndrea Lo Mastro
Andrea Lo Mastro
FTFiorella Tringali
Fiorella Tringali
Antonio TerrasiAntonio Terrasi
Antonio Terrasi
Francesco RuffinoFrancesco Ruffino
Francesco Ruffino
Cu nanoparticles were produced by using solid-state dewetting (dry) of a 1.3 nm Cu layer or laser ablation of a Cu solid target (wet) in acetone and methanol. The morphology and chemical composition of the nanoparticles were investigated as a function of the synthesis methods and their key parameters of the annealing temperature (200–500 °C) and the liquid environment during the ablation. Cu nanoparticles were then embedded in transparent conductive oxide (TCO) films as aluminum-doped zinc oxide (AZO) or zirconium-doped indium oxide (IZrO); the TCObott/Cu nanoparticle/TCOtop structures were synthesized with all combinations of AZO and IZrO as the top and bottom layers. The goal was to achieve a plasmonic and conductive structure for photovoltaic applications via a comparison of the involved methods and all fabricated structures. In particular, solid-state dewetting produced faceted or spherical (depending on the annealing temperature) nanoparticles with an average size below 150 nm while laser ablation produced spherical nanoparticles below 250 nm. Dry and wet plasmonic conductive structures as a function of the TCOs employed and the temperature of annealing could reach a sheet resistance of 86 Ω/sq. The energy band-gap Egap, absorbance, transmittance, and reflectance of the plasmonic conductive structures were investigated in the UV–vis–NIR range. They showed a dependence on the sequence of the top and bottom TCO, with best transmittances of 89.4% for the dry plasmonic conductive structure and 84.7% for the wet plasmonic conductive structure. The latter showed a higher diffused transmittance of between 10–20% in the visible range.

6 December 2023 in Micromachines
Verified
Journal Article
Open access
PDF file
CPCristiano Lo Pò
Cristiano Lo Pò
Valentina IaconoValentina Iacono
Valentina Iacono
SBStefano Boscarino
Stefano Boscarino
Maria Grazia GrimaldiMaria Grazia Grimaldi
Maria Grazia Grimaldi
Francesco RuffinoFrancesco Ruffino
Francesco Ruffino
How nice would it be to obtain the size distribution of a nanoparticle dispersion fast and without electron microscope measurements? UV-Vis-NIR spectrophotometry offers a very rapid solution; however, the spectra interpretation can be very challenging and needs to take into account the size distribution of the nanoparticles and agglomeration. This work suggests a Monte Carlo method for rapid fitting UV-Vis-NIR spectra using one or two size distributions starting from a dataset of precomputed spectra based on Mie theory. The proposed algorithm is tested on copper nanoparticles produced with Pulsed Laser Ablation in Liquid and on gold nanoparticles from the literature. The fitted distribution results are comparable with Transmission Electron Microscope results and, in some cases, reflect the presence of agglomeration.

1 February 2022 in Micromachines
Verified
Journal Article
Open access
PDF file
SBStefano Boscarino
Stefano Boscarino
MCMaria Censabella
Maria Censabella
MMMelanie Micali
Melanie Micali
MRMarco Russo
Marco Russo
Antonio TerrasiAntonio Terrasi
Antonio Terrasi
Francesco RuffinoFrancesco Ruffino
Francesco Ruffino
Herein, Cu nanostructures are obtained by solid-state dewetting of 9 nm copper layer (dry) or by ablating copper target, using a nanosecond pulsed laser at 1064 nm, in acetone and isopropyl alcohol (wet). The Cu nanostructures are embedded in aluminum-doped zinc oxide layer. Then, the electrical, optical, and morphological properties of the two kinds of systems, as a function of their synthesis parameters, are investigated. The aim is to compare the two fabrication methods and select the main conditions to achieve the best system for photovoltaic applications. The main differences, exhibited by the wet and dry processes, were in the shape and size of the Cu nanostructures. Dewetting in nitrogen produces faceted nanoparticles, with an average size below 150 nm, while laser ablation originates spherical and smaller nanoparticles, below 50 nm. Dry system underwent to thermal annealing, which improves the electrical properties, compared to the wet system, with a sheet resistance of 103 vs. 106 Ω/sq, respectively; finally, the dry system shows a maximum transmittance of 89.7% at 697 nm, compared to the wet system in acetone, 88.4% at 647 nm, as well as in isopropyl alcohol, 86.9% at 686 nm. Moreover, wet systems show higher transmittance in NUV.

3 January 2023 in Nanomaterials
Verified
Journal Article
Open access
PDF file
simona filicesimona filice
simona filice
SBStefano Boscarino
Stefano Boscarino
mario scuderimario scuderi
mario scuderi
Sebania LibertinoSebania Libertino
Sebania Libertino
CGclelia galati
clelia galati
Silvia ScaleseSilvia Scalese
Silvia Scalese
Nanocomposites formed by aluminum-doped zinc oxide nanoparticles (AZO–NP) and multiwall carbon nanotubes (CNT) are proposed here as a promising material for UV light sensing applications, with the great advantage of operating in air, at room temperature, and at low voltage. Nanocomposite layers were prepared with different AZO:CNT weight ratios by a simple methodology at room temperature. They were characterized by means of UV–Vis spectroscopy, scanning and transmission electron microscopies (SEM and TEM), and X-ray photoelectron spectroscopy (XPS). The interaction between the two nanomaterials was demonstrated by comparing the properties of the nanocomposite with the ones shown by the AZO–NPs. Dense AZO–CNT nanocomposite layers were deposited between two metal electrodes on a SiO2/Si substrate, and the electrical properties were investigated in dark condition and under UV light irradiation. The electrical response to the UV light was a sudden current increase that reduced when the light was switched off. Several UV on/off cycles were performed, showing good repeatability and stability of the response. The mechanisms involved in the electrical response are discussed and compared to the ones previously reported for ZnO–CNT nanocomposites.

24 March 2023 in Nanomaterials
Verified
Journal Article
Open access
PDF file
Antonino ScandurraAntonino Scandurra
Antonino Scandurra
Valentina IaconoValentina Iacono
Valentina Iacono
SBStefano Boscarino
Stefano Boscarino
Silvia ScaleseSilvia Scalese
Silvia Scalese
Maria Grazia GrimaldiMaria Grazia Grimaldi
Maria Grazia Grimaldi
Francesco RuffinoFrancesco Ruffino
Francesco Ruffino
Non-enzymatic electrochemical glucose sensors are of great importance in biomedical applications, for the realization of portable diabetic testing kits and continuous glucose monitoring systems. Nanostructured materials show a number of advantages in the applications of analytical electrochemistry, compared to macroscopic electrodes, such as great sensitivity and little dependence on analyte diffusion close to the electrode–solution interface. Obtaining electrodes based on nanomaterials without using expensive lithographic techniques represents a great added value. In this paper, we modeled the chronoamperometric response towards glucose determination by four electrodes consisting of nanostructured gold onto graphene paper (GP). The nanostructures were obtained by electrochemical etch, thermal and laser processes of thin gold layer. We addressed experiments obtaining different size and shape of gold nanostructures. Electrodes have been characterized by field emission scanning electron microscopy (FE-SEM), X-ray photoelectron spectroscopy (XPS), cyclic voltammetry, and chronoamperometry. We modeled the current-time response at the potential corresponding to two-electrons oxidation process of glucose by the different nanostructured gold systems. The finest nanostructures of 10–200 nm were obtained by laser dewetting of 17 nm thin and 300 °C thermal dewetting of 8 nm thin gold layers, and they show that semi-infinite linear diffusion mechanism predominates over radial diffusion. Electrochemical etching and 17 nm thin gold layer dewetted at 400 °C consist of larger gold islands up to 1 μm. In the latter case, the current-time curves can be fitted by a two-phase exponential decay function that relies on the mixed second-order formation of adsorbed glucose intermediate followed by its first-order decay to gluconolactone.

15 February 2026 in Micromachines
Verified
Journal Article
Open access
PDF file
CPCristiano Lo Pò
Cristiano Lo Pò
SBStefano Boscarino
Stefano Boscarino
Francesco RuffinoFrancesco Ruffino
Francesco Ruffino
Electrochemical Impedance Spectroscopy (EIS) is a widely used technique for characterizing the electrode–electrolyte interface. EIS analysis can be very complex and tedious. In this work, a fitting algorithm written in C is implemented on OriginPro software to avoid the data import/export operation and speed up the analysis. An automated fitting procedure that assigns the initial parameters is implemented for the simplest equivalent circuit. In addition, the possibility of using a custom error function is explored, with results comparable to that of reference software. The developed algorithm is tested on two different case studies.