In March 2022, large parts over the north Indian plains including the breadbasket region, and southern Pakistan began experiencing prolonged heat, which continued into May. The event was exacerbated due to prevailing dry conditions in the region, resulting in devastating consequences for public health and agriculture. Using event attribution methods, we analyse the role of human-induced climate change in altering the chances of such an event. To capture the extent of the impacts, we choose March–April average of daily maximum temperature over the most affected region in India and Pakistan as the variable. In observations, the 2022 event has a return period of ∼1-in-100 years. For each of the climate models, we then calculate the change in probability and intensity of a 1-in-100 year event between the actual and counterfactual worlds for quantifying the role of climate change. We estimate that human-caused climate change made this heatwave about 1 °C hotter and 30 times more likely in the current, 2022 climate, as compared to the 1.2 °C cooler, pre-industrial climate. Under a future global warming of 2 °C above pre-industrial levels, heatwaves like this are expected to become even more common (2–20 times more likely) and hotter (by 0 °C–1.5 °C) compared to now. Stronger and frequent heat waves in the future will impact vulnerable groups as conditions in some regions exceed limits for human survivability. Therefore, mitigation is essential for avoiding loss of lives and livelihood. Heat Action Plans have proved effective to help reduce heat-related mortality in both countries.
21 August 2020 in The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
Remote sensing and hydrological models are one of the foremost tools for rapid and comprehensive study of flood hazards and disasters in any parts of the world. Current study is focused on severe 2018 Kerala flood, and is done using various remote sensing data, geospatial tools and combination of hydrological/hydrodynamic/topographical models. Flood mapping is done with pre and post floods remote sensing datasets. For pre-Flood analysis, Normalized Difference Water Index (NDWI) map was prepared on Google Earth Engine (GEE), using Sentinel-2 images for the period of Feb. 2017 to identify permanent water bodies. For post-Flood analysis, GEE was used to download the pre-processed and thermal noise removed Sentinel-1 SAR image for Aug. 9, 2018, Aug. 14 and Aug. 21, 2018 and flood maps were generated using this data. In addition to SAR data, probable flood inundation areas using topography-based flood inundation tool HAND (Height Above Nearest Drainage tool) was also utilized. Hydrological simulation was carried out for all 12 major river sub-basins of Kerala, where floods are reported. Indian Meteorological Department-Global Precipitation Measurement (IMD-GPM) gridded daily data is used as input meteorological data for hydrological simulations. The hydrological simulations results were verified using published Central Water Commission (CWC) reports and reservoirs data for India-WRIS. The hydrodynamic simulation was also performed for simulating the Idukki dam release data and flood condition in downstream areas. Overall, an integrated study and developed approach can be utilized by state and central water and disaster management agencies to develop flood early warning systems.
19 November 2018 in The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
Capacity studies of reservoirs are important to evaluate sedimentation and optimize reservoir operation schedule based on realistic assessment of available storage. Capacity study at regular interval provide information about rate and pattern of sedimentation between various levels, loss of capacity due to sedimentation, remaining time span of reservoir, etc. In the present study, evaluation of revised capacity of Gobind Sagar reservoir in Bilaspur district, Himachal Pradesh, India has been done using Google Earth Engine. Landsat 8 (OLI) data for September 2015 and for the period September 2017 to May 2018 covering full extent of Gobind Sagar reservoir is taken to compute the water spread area of this reservoir at different dates. Subsequently, the reservoir water level and volume of water stored on the corresponding dates is acquired from India-WRIS. By using trapezoidal formula capacity between two elevations is determined using water spread area obtained from Google Earth Engine analysis and elevation data obtained from India-WRIS. The comparison of water spread areas of different water levels, as obtained from remotely sensed data from September 2017 to May, 2018 with those from survey carried out during 1996/97, indicates a reduction in the capacity by 10.71% and sedimentation rate was estimated to be 14.24 Mm3/year.
The extreme precipitation during August 2018 in Kerala, India was catastrophic, triggering one of the worst floods in history. There is growing evidence of human-induced climate change in driving hydroclimatic extremes across the globe. However, whether and to what degree the 2018 flooding event in Kerala was influenced by climate change has yet to be fully understood. To this end, we present the first formal attribution analysis of the event, using the probabilistic event attribution (PEA) framework. Three methods using (i) Historical and HistoricalNat runs from CMIP6 (general circulation models-based method), (ii) observed records from 1901–2018 for two periods, split at 1950 (time-slice method) and (iii) observations that are scaled to 1901 and 2018 climates (scaling method), are considered for quantifying the risk ratio (RR) of the event. Using an objective approach, the 2018 precipitation event is defined by the return period of the 4 day cumulative precipitation over the Periyar River Basin (PRB), during 15–18 August, 2018. The subsequent flood event is characterized by the return period of the 1 day maximum streamflow at one of the outlets of the PRB, where maximum impact during the event was reported. The results from multiple methods are consistent, suggesting that the event is exceptionally less likely to have been caused by anthropogenic climate change, with RR for the precipitation and flood events ranging from 0.31 to 0.82 and 0.55 to 0.8, respectively. The role of wet antecedent soil moisture conditions, which is found to be the primary driving factor of floods in the PRB, is also found to be unchanged between simulations with and without climate change. Our results highlight the challenges in unequivocal discerning of the climate change signal on regional hydrological events and emphasize the importance of better consideration of local confounding interventions in PEA studies.
19 November 2018 in The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
Era-Interim (ECMWF Re- analysis) is a global reanalysis atmospheric product which is being continuously updated in real time since 1979. It is also termed as third generation reanalysis product. The Era–Interim gives meteorological products like precipitation, temperature, etc. In the present work, 3-hourly Era–Interim product for the entire India is compared with gridded data provided by IMD for period 1979–2013 and APHRODITE data for period 1979–2007, respectively. The comparison is done on seasonal basis and the seasons are taken based on the pattern of rainfall, hence, the four seasons selected are DJF (December, January & February), MAM (March, April & May), JJAS (June, July, August & September) and ON (October & November). In the methodology the Era-Interim 3-hourly products are converted into the daily products and then it is used to form seasonal images for each year. All the images are then taken to form four images as outcome for the entire study period which represents the average rainfall (mm/day) for the entire region. This is being done for the IMD and for the APHRODITE Data. All the four images are then taken for the comparison with the reference images of the IMD 0.5º × 0.5º gridded rainfall data and with the APHRODITE 0.5º × 0.5º gridded rainfall data. The correlation coefficient and the RMSE for each season is calculated. The mean value is compared with the mean of IMD and APHRODITE rainfall products, respectively and a bias in mean is also calculated along with the scatter plots of Era-Interim with the reference datasets. The Era – Interim data came out with suitable comparative parameters with high correlation coefficient and low RMSE value in certain regions and in specific seasons. Scatter plots have also given good correlation in all the seasons. Bias maps have also shown very less bias in specific seasons for certain regions. The suitability maps prepared for the study region also shows that most of the region lies in most suitable range and very less in unsuitable range.
15 November 2018 in ISPRS Annals of the Photogrammetry, Remote Sensing and Spatial Information Sciences
The design and analysis of potable water distribution pipe network is one of the major task while planning any new city. Even finding the effectiveness and detecting any anomaly in the existing pipe line network is a very important to cut down losses and make a network all time efficient. This study makes an attempt to evaluate the existing water distribution network of Indian Institute of Remote Sensing (IIRS) and new pipe network to be developed under the master plan 2022. The new development induces an extra demand of 67634 litres per day (lpd). The Digital Globe image from Google Earth Pro is used for creating base layer and campus layout. ALOS PALSAR digital elevation model (DEM) is used to get elevation of nodes and tanks, which helps in alignment of pipes. Field survey was done for finding all the data necessary to make the database for input for EPANET 2.0. EPANET 2.0 pipe hydraulic model was used to test and design the existing and proposed potable water distribution pipe network. The results of evaluation of current operations show that the system can be made capable to fulfil the demand by increasing pumping time. But the future network operation requires an increase in pumping capability of 71 litre per minute (lpm) for filling Overhead tank. This study proves that geospatial technology is an efficient, time and cost saving alternative to the traditional methods of design and evaluation of potable water distribution networks.