Italy is among the top biowaste-generating countries in Europe, and has a well-structured waste management framework with quite a number of centralized composting facilities. In recent years, there has also been huge interest from local communities in decentralized composting. Although decentralized community composting is common in some countries, there is still a lack of information on the operative environment together with its potential logistical, environmental, economic, and social impacts. Considering the national Italian legislation on community composting as well as successfully implemented projects at EU level, Italy can set a model especially for Mediterranean countries that intend to build decentralized composting programs. Therefore, in the context of this review paper, a brief overview of the composting process was presented together with main applications in centralized and especially in decentralized composting, while the main focus was kept on the operative and legislative information gathered from Italian community composting. There is a huge difference in the number of composting plants between the regions, and the lack of centralized facilities in the central and southern regions can be supported by decentralized solutions. Decentralizing waste treatment facilities and thus creating local solutions to urban waste management strategies will help to achieve the resource recovery and valorization targets in line with the circular economy.
Groundwater is an important source of water. Since the control and removal of pollution are expensive, it is essential to identify the possible sources of contamination and to correctly classify groundwater on the basis of its intrinsic and integrated vulnerability. In the last years, many fuzzy models have been developed. There is a lack, however, of studies concerning the application of fuzzy logic for the assessment of the susceptibility of groundwater quality to anthropogenic activities and comparing these methods with traditional methods. The fuzzy model described in this paper assesses the aquifer integrated environmental vulnerability connected to the presence of illegal dumpsites and allows us to hierarchically classify them within a hazard scale. The results allowed us to carry out a comparison of the proposed fuzzy method with a traditional method. The fuzzy method proved to be a useful and objective tool for environmental planning.
Dyes are emerging as hazardous pollutants, which are the primary challenges for environmentalists. Dye removal from effluents is urgently needed. Adsorption technology has been widely employed in this context as an effective method for removing colours from the aqueous phase, and adsorption with the use of low-cost adsorbents has been shown to be more successful on a larger scale than other methods. In this study, spent coffee grounds (SCGs) were used as the precursor for the preparation of a low-cost activated carbon through the chemical activation with NaOH. The SCG sample was impregnated with NaOH and carbonised at 300 °C for three hours. Its morphological and physical-chemical properties were assessed using scanning electron microscopy (SEM), X-ray diffraction, and Raman spectroscopy analyses. The performance of the treated SCG as an adsorbent material for methylene blue (MB) was evaluated by analysing the effect of the initial pH ionic strength on the adsorption capacity and by evaluating the kinetics and the mechanisms of the process (using adsorption isotherms). The effect of the initial concentration (500 and 250 mg L−1) of MB on the kinetics of the process and the impact of the initial pH (7.5 and 6) on the adsorption isotherm were evaluated. The obtained results show that the pseudo-second order model controls the process for both the investigated initial concentration and the adsorption capacity, which are 142.8 and 113.6 mg L−1, respectively. The results indicate that the pH value influences the adsorption isotherm model that regulates the process. Specifically, this process is regulated by the Temkin’s model with a pH of 7.5 and by the Langmuir’s model with a pH of 6. The thermodynamics of the process were also determined. The results show that SCG, treated and carbonised by soft alkaline activation, is a promising low-cost adsorbent material as its performance is comparable to that of conventional active carbon materials.
In this paper, an effective strategy for fault detection of nitrogen sensors in alternated active sludge treatment plants is proposed and tested on a simulated set-up. It is based on two predictive neural networks, which are trained using a historical set of data collected during fault-free operation of a wastewater treatment plant and their ability to predict reduced (ammonium) and oxidized (nitrates and nitrites) nitrogen is tested. The neural networks are also characterized by good generalization ability and robustness with respect to the influent variability with time and weather conditions. Then, simulations have been carried out imposing different kinds of fault on both sensors, as isolated spikes, abrupt bias and increased noise. Processing of residuals, based on the difference between measured concentration values and neural networks predictions, allows a quick revealing of the fault as well as the isolation of the corrupted sensor.
The increasing interest towards climate change, water and energy saving, and soil protection has led the research community to consider non-conventional water as a sustainable source for irrigation of energy crops. Vegetation filter systems are considered a reliable technique for sustainable biomass cultivation, enabling the use of reclaimed wastewater as water and nutrients sources during irrigation periods. In this study, a geographic information system (GIS)-based spatial model was developed to identify areas potentially suitable for creating vegetation filter systems with poplars to size the plants of energy production. An economic assessment allowed us to identify the cost-effectiveness areas for biomass production that can be fertigated by reclaimed wastewater. Considering the Basilicata region as the test region, a surface area of 258,512 ha was investigated, identifying 73,331 ha of SRF soils sited downstream of 45 wastewater treatment plants (WWTPs). However, considering only areas that have positive net present value and are economically attractive, results indicate 1606 ha of SRF falling within the areas of influence of 39 WWTPs. The results show that the sector of dedicated crops, adjacent and linked with WWTPs, expresses a total capacity of 50.56 MW for thermal, 8.25 MW for electricity, and 31 MW for cogeneration (25.07 MWt and 5.94 MWe) plants.
The planning actions in municipal solid waste (MSW) management must follow strategies aimed at obtaining economies of scale. At the regional basin, a proper feasibility analysis of treatment and disposal plants should be based on the collection and analysis of data available on production rate and technological characteristics of waste. Considering the regulations constraint, the energy recovery is limited by the creation of small or medium-sized incineration plants, while separated collection strongly influences the heating value of the residual MSW. Moreover, separated collection of organic fraction in non-densely populated area is burdensome and difficult to manage. The paper shows the results of the analysis carried out to evaluate the potential energy recovery using a combined cycle for the incineration of mechanically pre-treated MSW in Basilicata, a non-densely populated region in Southern Italy. In order to focalize the role of sieving as pre-treatment, the evaluation on the MSW sieved fraction heating value was presented. Co-generative (heat and power production) plant was compared to other MSW management solutions (e.g., direct landfilling), also considering the environmental impact in terms of greenhouse gases (GHGs) emissions.