The reliability degradation of HfO2-based devices under heavy ion irradiation is still an open question. In this letter, the ultrathin amorphous HfO2 gate stacks were irradiated by different types of swift heavy ions (SHIs). The fine structure of latent track in amorphous HfO2 is crystalline phase along the particle trajectory. The effects of latent track on the electrical properties were characterized by the high frequency capacitance-voltage (C-V) and the leakage current density-voltage (J-V) measurements. The quantitative relationship between microstructure changes and electrical properties provides a new method to estimate the threshold of the electronic energy loss ((dE/dx)e) for crystallization and allows for prediction of device sensitivity to SHIs irradiation.
The 65 nm Static Random Access Memory (SRAM) based Field Programmable Gate Array (FPGA) was designed and manufactured, which employed tradeoff radiation hardening techniques in Configuration RAMs (CRAMs), Embedded RAMs (EBRAMs) and flip-flops. This radiation hardened circuits include large-spacing interlock CRAM cells, area saving debugging logics, the redundant flip-flops cells, and error mitigated 6-T EBRAMs. Heavy ion irradiation test result indicates that the hardened CRAMs had a high linear energy transfer threshold of upset ∼18 MeV/(mg/cm ) with an extremely low saturation cross-section of 6.5 × cm /bit, and 71% of the upsets were single-bit upsets. The combinational use of triple modular redundancy and check code could decline ∼86.5% upset errors. Creme tools were used to predict the CRAM upset rate, which was merely 8.46 × /bit/day for the worst radiation environment. The effectiveness of radiation tolerance has been verified by the irradiation and prediction results.
Radiation effects can induce severe and diverse soft errors in digital circuits and systems. A Xilinx commercial 16 nm FinFET static random-access memory (SRAM)-based field-programmable gate array (FPGA) was selected to evaluate the radiation sensitivity and promote the space application of FinFET ultra large-scale integrated circuits (ULSI). Picosecond pulsed laser and high energy heavy ions were employed for irradiation. Before the tests, SRAM-based configure RAMs (CRAMs) were initialized and configured. The 100% embedded block RAMs (BRAMs) were utilized based on the Vivado implementation of the compiled hardware description language. No hard error was observed in both the laser and heavy-ion test. The thresholds for laser-induced single event upset (SEU) were ~3.5 nJ, and the SEU cross-sections were correlated positively to the laser’s energy. Multi-bit upsets were measured in heavy-ion and high-energy laser irradiation. Moreover, latch-up and functional interrupt phenomena were common, especially in the heavy-ion tests. The single event effect results for the 16 nm FinFET process were significant, and some radiation tolerance strategies were required in a radiation environment.
!With device scaling-down, circuits appear more susceptible to transient faults especially for the bulk silicon process. Thus, FD-SOI technology has been widely popular in serious radiation environment due to its high radiation-tolerance inherence created by an additional BOX layer. In this work, seven different inverter chains with two kinds of core voltages, four kinds of channel areas and a stack inverter chain are designed to investigate the SET in advanced 22 nm FD-SOI CMOS technology. A NAND chain is also designed and used for comparison with inverter chains. The sensitivities of diverse SET targets are characterized with different core voltages and heavy-ion tilts. Results showed that the inverter size and the driving current can dominate the occurrence and width distribution of transient pulses. Besides, heavy-ion strike angle, LET, and charge sharing can also affect the pulse width. Though a high LET can deposit adequate energy, the widest pulses are measured in low-LET 84Kr ion irradiation, rather than in high-LET ions’ irradiation, which are attributed to the pulse quenching effect and being investigated by Hspice simulation. The LET dependency and low voltage induced SET widening are all observed in irradiation tests and verified by circuit-level pulse injection. All of the SET sensitive targets are distinguished. The results are highly effective for the designers to suppress and correct the SET-oriented errors to achieve a radiation robust system.
2 April 2018 in IEEE Transactions on Nuclear Science
The 6T SRAM cell with fast access speed and silicon-oxide-nitride-oxide-Silicon (SONOS) cell with nonvolatility in a 130-nm commercial-off-the-shelf (COTS) nonvolatile SRAM (NVSRAM) is exposed to heavy ion irradiation under different test conditions. In 6T SRAM mode, the influence of linear energy transfer (LET), supply voltage, ambient temperature, and periphery circuits on single-event effects (SEE) is studied and analyzed. The anomaly of multiple upsets proportion with increasing the LET value may be ascribed to the difference of ion track structure. The observed nonmonotonic relationship between the upset cross section and supply voltage can be explained by a competing mechanism of critical charge and collected charge in a sensitive node. In SONOS nonvolatile mode, the upset threshold of 60.9 MeV/(mg/cm 2 ) and two types of errors are observed. The recoverable upset error may be caused by ion-induced discharge of nonvolatile cell and the hard error that can be annealed to vanish in room temperature probably results from the ion-induced charge trapping in oxide. The above results show that the 6T SRAM cell in this NVSRAM is vulnerable to SEE, whereas the SONOS nonvolatile cell is quite resistant. Based on the prediction of space upset rate, the potential applications and issues of this COTS NVSRAM and deep sub-micrometer SONOS process in space component are discussed.
13 December 2021 in Nuclear Science and Techniques