Alberto Cofiño Villar

Dr. Alberto Cofiño Villar


Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 May 2020 in Metals
Verified
Journal Article
Open access
PDF file
FAFlorentino Alvarez-Antolin
Florentino Alvarez-Antolin
JAJuan Asensio-Lozano
Juan Asensio-Lozano
AVAlberto Cofiño Villar
Alberto Cofiño Villar
AGAlejandro Gonzalez
Alejandro Gonzalez
In the as-cast state, Al–Mg–Si alloys are not suitable for hot forming. They present low ductility due to the presence of intermetallic β-AlFeSi particles that form in the interdendritic regions during the solidification process. Homogenization treatments promote the transformation of these particles into α-(FeMn)Si particles, which are smaller in size and more rounded in shape, thus improving the ductility of the material. This paper analyses the influence of various solution treatments on the transformation of β-AlFeSi particles into α-(FeMn)Si particles in an Al 6063 alloy. Their effect on different ageing treatments in the 150–180 °C temperature range is also studied. An increase in the solution temperature favours greater transformation of the β-AlFeSi particles into α-(FeMn)Si, dissolving a greater amount of Si, thereby having a significant effect on subsequent ageing. We found that as the dwell time at a temperature of 600 °C increases, the rate of dissolution of the Fe atoms from α-(FeMn)Si particles exceeds the rate of incorporation of Mn atoms into said particles. This seems to produce a delay in reaching the peak hardness values in ageing treatments, which warrants further research to model this behaviour. The optimal solution treatment takes place at around 600 °C and the highest obtained peak hardness value is 104 HV after a 2 h solution treatment at said temperature and ageing at 160 °C for 12 h.

23 July 2021 in Metals
Verified
Journal Article
Open access
PDF file
FAFlorentino Alvarez-Antolin
Florentino Alvarez-Antolin
ZAZakariae Amghouz
Zakariae Amghouz
AVAlberto Cofiño Villar
Alberto Cofiño Villar
AGAlejandro Gonzalez
Alejandro Gonzalez
MMManuel G. Melero
Manuel G. Melero
High-voltage and alternating current conductors are mainly made up of a steel core and an envelope made of aluminum wires. The alloys commonly used in the shell are of pure aluminum, which provides low electrical resistivity, but also low mechanical resistance. The correlation between resistance and electrical resistivity has become a design limitation, which limits the development of new alloys. Traditional airline conductors limit their service temperature to a maximum of 80 °C. Al-Zr alloys are susceptible to hardening by aging treatment at high temperatures due to the precipitation of the metastable L12-Al3Zr phase, which allows their working temperature to be limited to 300 °C. This work aims to correlate the resistance and electrical resistivity of two alloys with hyperperitectic compositions, subjected to a solution treatment at 640 °C. At the same time, the aging potential at different temperatures is analyzed using aging duration of up to 900 h. Whereas, the ultimate goal is to correlate the results with electrical resistivity, trying to achieve resistivity values lower than 28 nΩm. It is worth mentioning that there is a slow aging process and the inverse correlation between hardness and electrical resistivity. The optimum result is achieved in an alloy with more than 0.4% Zr subjected to aging at 380 °C in a time range between 425 and 900 h. In these cases, electrical resistivity values lower than 26 nΩm were reached. Transmission electron microscopy (TEM) verified the nanometric size of the L12-Al3Zr precipitates and their coherence with the α(Al) matrix. In turn, the size distribution of the precipitates was analyzed, revealing two different families of precipitates with respective averages of 4 and 19 nm. The precipitates associated with the average of 4 nm are the majority when the aging time is 425 h. However, when the aging time increases to 900 h, sizes close to 20 nm are the majority. This confirms the slow growth of the L12-Al3Zr precipitates during aging and the beginning of the over-aging phenomenon after almost 900 h of aging.

15 September 2018 in Metals
Verified
Journal Article
Open access
PDF file
AVAlberto Cofiño Villar
Alberto Cofiño Villar
FAFlorentino Alvarez-Antolin
Florentino Alvarez-Antolin
JAJuan Asensio-Lozano
Juan Asensio-Lozano
One of the main in-service failure mechanisms of the work-rolls used in hot strip mill finishing stands is surface spalling. The indefinite chill double-poured rolls usually comprise of a peripheral working layer made of crushed Ni-hard cast iron and a grey cast iron core, mostly pearlitic matrix with spheroidal graphite. To enhance its wear resistance, the working layer can be alloyed with Mo and Nb. The possible cracking and spalling of the surfaces of these work-rolls is strongly influenced by the presence of carbides and the continuity of their network. The flexural and impact toughness tests are reliable testing methods to assess these properties. The aim of this paper is to identify those manufacturing factors that have a significant effect on the flexural strength and toughness of this material, correlating the results with the volume fraction of precipitated carbides. It is worth highlighting, among the analysed factors are the liquidus temperature, the %Si, the use of an inoculant with traces of Lanthanum, and inoculation with different amounts of FeB, SiCa and Mg. Inoculation with SiCa is found to have a positive effect on the toughness of the material, breaking up the continuity of the carbide network, while FeB is found to act as a heterogeneous nucleant for NbC precipitation. However, high FeB contents reduce flexural strength and do not have a significant effect on the hardness of the material. To enhance the fracture toughness of the working layer, a liquidus temperature in the 1270–1275 °C range is recommended, as well as inoculating the ladle with Mg, 3 kg/T FeB and 0.6 kg/T SiCa.

25 January 2022 in Materials
Verified
Journal Article
Open access
PDF file
FAFlorentino Alvarez-Antolin
Florentino Alvarez-Antolin
AGAlejandro Gonzalez
Alejandro Gonzalez
AVAlberto Cofiño Villar
Alberto Cofiño Villar
CACarlos Hugo Alvarez-Perez
Carlos Hugo Alvarez-Perez
Vanadis 4 steel is a tool steel processed by powder metallurgy (PM). Its main alloying elements are Cr, V and Mo. Through the application of a design of experiments with six factors and eight experiments, the parameters of the process related to the thermal treatment of these steels are deliberately varied. Those thermal parameters related to the destabilisation of austenite were analysed: the cooling method in quenching, tempering and the application of an ionic nitriding treatment. Through XRD, the percentage and types of precipitated crystalline phases were determined, and, through SEM-EDX, the microstructure was revealed. At the same time, through a pin-on-disc test, those factors with a significant influence on resistance to wear were determined. It has been concluded that, in order to increase resistance to wear, treatments of destabilisation of the austenite at 900 °C with oil quenching, tempering at 550 °C for 4 h and a subsequent treatment of plasma nitriding would be very favourable. This tempering favours a second destabilisation of the austenite and its transformation into martensite, as well as the joint precipitation of type M7C3 and MC carbides. The thickness of the nitrided layer exceeds 100 microns and generates a fully adhesive wear mechanism.

21 November 2021 in Metals
Verified
Journal Article
Open access
PDF file
AVAlberto Cofiño Villar
Alberto Cofiño Villar
FAFlorentino Alvarez-Antolin
Florentino Alvarez-Antolin
CACarlos Hugo Alvarez-Perez
Carlos Hugo Alvarez-Perez
Work-rolls manufactured through the Indefinite Chill Double Poured (ICDP) method present an exterior work layer manufactured in a martensitic white cast iron alloyed with 4.5 %Ni, 1.7 %Cr, and 0.7 %Nb (wt.%). In its microstructure, there are abundant carbides of the type M3C and MC, which give high resistance to wear, and graphite particles which improve the service behaviour of the rolls against thermal cycling. The core of the rolls is manufactured in grey cast iron of pearlitic matrix and spheroidal graphite. These work-rolls are used in the finishing stands in Hot Strip Mills for rolling slabs proceeding from continuous casting at 1200 °C. Through the application of a Design of Experiments (DoE), an attempt has been made to identify those manufacturing factors which have a significant effect on resistance to wear of these rolls and to find an optimal combination of levels of these factors which allow for improvement in resistance to wear. To increase resistance to wear, it is recommended to situate, simultaneously, the liquidus temperature and the percentage of Si in the respective ranges of 1250–1255 °C and 1.1–1.15 (wt.%). Higher liquidus temperatures favour the presence of the pro-eutectic constituent rather than the eutectic constituent. The outer zone of the work layer, in contact with the metal sheet, which is being rolled, does not show the graphitising effect of Si (0.8–1.15 wt.%). On the contrary, it confirms the hardening effect of the Si in solid solution of the ferrite. The addition of 0.02% of Mg (wt.%) and the inoculation of 6 kg/T of FeB tend to eliminate the graphitising effect of the Si, thus favouring that the undissolved carbon in the austenite is found to form carbides in contrast to the majority formation of graphite.

8 January 2019 in Materials
Verified
Journal Article
Open access
PDF file
AVAlberto Cofiño Villar
Alberto Cofiño Villar
FAFlorentino Alvarez-Antolin
Florentino Alvarez-Antolin
JAJuan Asensio-Lozano
Juan Asensio-Lozano
MGMaria A Garcia
Maria A Garcia
This paper presents the results obtained regarding the control by manufacturers of the percentage, shape, and size of the precipitated graphite in the working layer of duplex work-rolls used in hot strip mill finishing stands. This working layer is manufactured in a martensitic white cast iron alloyed with Cr and Nb to promote the precipitation of M3C and MC carbides, which provide a high wear resistance. The thermal cycling behavior of this layer also has a decisive influence on its service life. In this context, the percentage of graphite and its morphology play a very important role against said thermal cycling. With the aim of studying their effect on the sphericity of graphite, the analyzed industrial manufacturing factors worth highlighting include the liquidus temperature, the %Si, the use of an FeSi inoculant with traces of Lanthanum, inoculation with different amounts of FeB and SiCaMn, and the addition of Mg. At the periphery of the working layer, it was found that the use of the FeSi inoculant with traces of La promoted an increase in the density of counts of graphite, and that inoculation with FeB and the addition of 0.02% Mg diminished the nodularity of the graphite. Furthermore, throughout the entire thickness of the working layer, an increase in the amount of SiCaMn of up to 0.6 kg/T produced an increase in the size of the graphite particles and a marked improvement in their nodularity.