Wire electrical discharge machining has appeared mainly in response to the need for detachment with sufficiently high accuracy of parts of plate-type workpieces. The improvements introduced later allowed the extension of this machining technology to obtain more complex ruled surfaces with increasingly high requirements regarding the quality of the machined surfaces and the productivity of the wire electrical discharge machining process. Therefore, it was normal for researchers to be interested in developing more and more in-depth investigations into the various aspects of wire electrical discharge machining. These studies focused first on improving the machining equipment, wire electrodes, and the devices used to position the clamping of a wire electrode and workpiece. A second objective pursued was determining the most suitable conditions for developing the machining process for certain proper situations. As output parameters, the machining productivity, the accuracy, and roughness of the machined surfaces, the wear of the wire electrode, and the changes generated in the surface layer obtained by machining were taken into account. There is a large number of scientific papers that have addressed issues related to wire electrical discharge machining. The authors aimed to reveal the aspects that characterize the process, phenomena, performances, and evolution trends specific to the wire electrical discharge machining processes, as they result from scientific works published mainly in the last two decades.

The thermal properties of parts obtained by 3D printing from polymeric materials may be interesting in certain practical situations. One of these thermal properties is the ability of a material to expand as the temperature rises or shrink when the temperature drops. A test experiment device was designed based on the thermal expansion or negative thermal expansion of spiral test samples, made by 3D printing of polymeric materials to investigate the behavior of some polymeric materials in terms of thermal expansion or contraction. A spiral test sample was placed on an aluminum alloy plate in a spiral groove. A finite element modeling highlighted the possibility that areas of the plate and the spiral test sample have different temperatures, which means thermal expansions or contractions have different values in the spiral areas. A global experimental evaluation of four spiral test samples was made by 3D printing four distinct polymeric materials: styrene-butadiene acrylonitrile, polyethylene terephthalate, thermoplastic polyurethane, and polylactic acid, has been proposed. The mathematical processing of the experimental results using specialized software led to establishing empirical mathematical models valid for heating the test samples from −9 °C to 13 °C and cooling the test samples in temperature ranges between 70 °C and 30 °C, respectively. It was found that the negative thermal expansion has the highest values in the case of polyethylene terephthalate and the lowest in the case of thermoplastic polyurethane.

The strength of a joint between the ends of one or more strips can be improved by making the contours of the joint into the shape of either the Greek letter omega or of a dovetail. From the point of view of industrial practice, it is of interest to study the behavior of these joints under stretching demands. The emergence and development of additive manufacturing processes for parts made of polymeric materials has led to the idea of conducting experimental tests to highlight the behavior of omega and dovetail-type joints during the tensile test. For the tensile testing of some test samples in which omega and dovetail joints were used, a Taguchi array of type L18 was employed, with eight independent variables, one variable with a two-level variation, and seven variables with variations on three levels. As independent variables, the type of joint, the couple of polymer materials used to make the two components of the joint, some characteristic dimensions of the joint contours, and some input factors in the 3D printing process were established. The values of average force and average displacement at the peak were considered output parameters. The experimental results were mathematically processed, determining empirical mathematical models of the second-degree polynomial type. These models highlight the influence exerted by the considered input factors on the values of the output parameters.

Wire electrical discharge machining (WEDM) is a process that is used when it is necessary to manufacture small-width slots with a micrometer accuracy or to precisely detach parts with complex contours from metal workpieces in the form of sheets or plates. The fact that the wire electrode rests only in the working zone in two of its guides allows it to achieve micrometric oscillations, leading to the generation of an error from the flat shape of the slot surfaces that gradually develops into the workpiece. The slot widths are influenced by several factors, such as the workpiece thickness, pulse-on time, pulse-off time, the wire tension force, the current, and the wire movement speed along its axis. Some theoretical assumptions about the behavior of the wire electrode were first considered. An experimental research plan was then designed to obtain additional information on the influence of the mentioned factors on the slot width in different positions of the cross-section through the slot. The statistical processing of the experimental results led to the elaboration of empirical mathematical models that highlight the order of influence and the intensity of the influence exerted by the factors mentioned above.

The development of 3D Printing technologies introduced new possibilities regarding multi-material part production. Fused Filament Fabrication (FFF) is one of those technologies suitable for multi-material 3D printing. Usually, multi-material parts are manufactured from different blends of the same material, also known as multi-colour 3D printing, or from materials with good chemical compatibility. Conventionally, a simple face-to-face bond interface between parts’ bodies and a chemical bond between thermoplastics define the mechanical performance of multi-material components. In this regard, the paper aimed to investigate the strength of the contact interface of multi-material specimens using a geometrical approach. Therefore, multiple interlocking interfaces were investigated, such as omega shape, T-shape, dovetail, and others for samples made of low-compatibility thermoplastic materials, acrylic styrene-acrylonitrile (ASA), thermoplastic polyurethane (TPU). The results showed that macroscopic inter-locking interfaces are significantly increasing the mechanical properties.