Wire electrical discharge machining has appeared mainly in response to the need for detachment with sufficiently high accuracy of parts of plate-type workpieces. The improvements introduced later allowed the extension of this machining technology to obtain more complex ruled surfaces with increasingly high requirements regarding the quality of the machined surfaces and the productivity of the wire electrical discharge machining process. Therefore, it was normal for researchers to be interested in developing more and more in-depth investigations into the various aspects of wire electrical discharge machining. These studies focused first on improving the machining equipment, wire electrodes, and the devices used to position the clamping of a wire electrode and workpiece. A second objective pursued was determining the most suitable conditions for developing the machining process for certain proper situations. As output parameters, the machining productivity, the accuracy, and roughness of the machined surfaces, the wear of the wire electrode, and the changes generated in the surface layer obtained by machining were taken into account. There is a large number of scientific papers that have addressed issues related to wire electrical discharge machining. The authors aimed to reveal the aspects that characterize the process, phenomena, performances, and evolution trends specific to the wire electrical discharge machining processes, as they result from scientific works published mainly in the last two decades.

The thermal properties of parts obtained by 3D printing from polymeric materials may be interesting in certain practical situations. One of these thermal properties is the ability of a material to expand as the temperature rises or shrink when the temperature drops. A test experiment device was designed based on the thermal expansion or negative thermal expansion of spiral test samples, made by 3D printing of polymeric materials to investigate the behavior of some polymeric materials in terms of thermal expansion or contraction. A spiral test sample was placed on an aluminum alloy plate in a spiral groove. A finite element modeling highlighted the possibility that areas of the plate and the spiral test sample have different temperatures, which means thermal expansions or contractions have different values in the spiral areas. A global experimental evaluation of four spiral test samples was made by 3D printing four distinct polymeric materials: styrene-butadiene acrylonitrile, polyethylene terephthalate, thermoplastic polyurethane, and polylactic acid, has been proposed. The mathematical processing of the experimental results using specialized software led to establishing empirical mathematical models valid for heating the test samples from −9 °C to 13 °C and cooling the test samples in temperature ranges between 70 °C and 30 °C, respectively. It was found that the negative thermal expansion has the highest values in the case of polyethylene terephthalate and the lowest in the case of thermoplastic polyurethane.

Complex surfaces such as helical ones are commonly used in machinery. Such surfaces can be obtained by various machining processes, one of these processes being thread whirling. The influence of machining conditions needs to be better understood to develop a more precise prediction of the specific resulting errors involved in thread whirling. This paper firstly presents the theoretical conditions which generate micro-deviations on whirled surfaces. A theoretical model which considers the geometrical parameters describing the whirling head and cutters and the process’s whole kinematics was developed. The threaded surface was described as a complex compound surface resulting from intersecting successive ruled helical surfaces corresponding to the cutting edges of the set of cutters from the whirling head. Numerical simulation results were exemplified and validation experiments were both designed and performed. Empirical mathematical models were established to highlight the influence of the input factors such as thread pitch and external diameter, the ratio between the diameter of cutters’ top edge disposal and the thread’s external diameter, the rotary speed of the whirling head, and the rotary speed of the workpiece on some accuracy elements and roughness parameters of the threaded surface.

The strength of a joint between the ends of one or more strips can be improved by making the contours of the joint into the shape of either the Greek letter omega or of a dovetail. From the point of view of industrial practice, it is of interest to study the behavior of these joints under stretching demands. The emergence and development of additive manufacturing processes for parts made of polymeric materials has led to the idea of conducting experimental tests to highlight the behavior of omega and dovetail-type joints during the tensile test. For the tensile testing of some test samples in which omega and dovetail joints were used, a Taguchi array of type L18 was employed, with eight independent variables, one variable with a two-level variation, and seven variables with variations on three levels. As independent variables, the type of joint, the couple of polymer materials used to make the two components of the joint, some characteristic dimensions of the joint contours, and some input factors in the 3D printing process were established. The values of average force and average displacement at the peak were considered output parameters. The experimental results were mathematically processed, determining empirical mathematical models of the second-degree polynomial type. These models highlight the influence exerted by the considered input factors on the values of the output parameters.

Without ensuring high productivity, single-point incremental forming allows obtaining cavities in sheet-type workpieces by rotating and moving a rotary forming tool along a predetermined path. The process can be used in the case of both metal and plastic sheets. The heat generated in the processing area is expected to cause different elongations and contractions, affecting the final dimensional accuracy of the surfaces obtained. A full factorial experiment with three independent variables at two levels was used to investigate the correlations between the values of some of the process input factors and the results of thermal processes developed at the contact between the rotating tool and the workpiece. Experimental research was performed in dry single-point incremental forming, using lubricants and, respectively, with the generation of a decrease in temperature by the use of coolants. Empirical mathematical models were determined, and they confirmed the influence of the values of considered input factors on the thermal processes developed at the contact between the tool and the workpiece material. Temperatures of up to 147 °C were recorded in the processing area of the plastic workpiece.