Continuous, wide field-of-view, high-efficiency, and fast-response beam steering devices are desirable in a plethora of applications. Liquid crystals (LCs)—soft, bi-refringent, and self-assembled materials which respond to various external stimuli—are especially promising for fulfilling these demands. In this paper, we review recent advances in LC beam steering devices. We first describe the general operation principles of LC beam steering techniques. Next, we delve into different kinds of beam steering devices, compare their pros and cons, and propose a new LC-cladding waveguide beam steerer using resistive electrodes and present our simulation results. Finally, two future development challenges are addressed: Fast response time for mid-wave infrared (MWIR) beam steering, and device hybridization for large-angle, high-efficiency, and continuous beam steering. To achieve fast response times for MWIR beam steering using a transmission-type optical phased array, we develop a low-loss polymer-network liquid crystal and characterize its electro-optical properties.

Liquid-crystal-based Pancharatnam–Berry phase optical elements (PBOEs), also known as diffractive wave plates (DWPs), geometric phase optics (GPO), or geometric phase holograms (GPHs), are functional planar structures with patterned orientation of anisotropy axis. Several scientifically interesting yet practically useful electro-optical effects, such as focusing, beam splitting, waveguide coupling, and wavelength filtering, have been realized with PBOEs. Because of the high degree of optical tunability, polarization selectivity, nearly 100% diffraction efficiency, and simple fabrication process, PBOEs have found widespread applications in emerging display systems, particularly virtual/augmented/mixed reality displays and head-up displays. In this review, we will describe the basic operation principles, present device fabrication procedures, discuss numerical modeling methods, and address applications of PBOEs in emerging display systems.

Sidewall emission of a micro-scale light emitting diode (micro-LED) improves the light extraction efficiency, but it causes mismatched angular distributions between AlGaInP-based red micro-LED and InGaN-based blue/green counterparts due to material difference. As a result, color shift of RGB micro-LED displays may become visually noticeable. To address this issue, we first analyze the angular distributions of RGB micro-LEDs and obtain good agreement between simulation and experiment. Next, we propose a device structure with top black matrix and taper angle in micro-LEDs, which greatly suppresses the color shift while keeping a reasonably high light extraction efficiency.

Color-converted micro-LED displays consist of a mono-color micro-LED array and color conversion materials to achieve full color, while relieving the burden of epitaxial growth of three-color micro-LEDs. However, it usually suffers from low efficiency and color crosstalk due to the limited optical density of color conversion materials. With funnel-tube array, the optical efficiency of the color-converted micro-LED display can be improved by ~3X, while the crosstalk is eliminated. After optimization of the tapper angle, the ambient contrast ratio is also improved due to higher light intensity.

Micro-LED (light-emitting diode) is a potentially disruptive display technology, while power consumption is a critical issue for all display devices. In this paper, we develop a physical model to evaluate the power consumption of micro-LED displays under different ambient lighting conditions. Both power efficiency and ambient reflectance are investigated in two types of full color display structures: red/green/blue (RGB) micro-LEDs, and blue-LED pumped quantum dots color-conversion. For each type of display with uniform RGB chip size, our simulation results indicate that there exists an optimal LED chip size, which leads to 30–40% power saving. We then extend our model to analyze different RGB chip sizes, and find that with optimized chip sizes an additional 12% average power saving can be achieved over that with uniform chip size.

We report a vertically-aligned liquid crystal display (LCD) device with submillisecond response time, high transmittance, and low operation voltage. The top substrate has a common electrode, while the bottom substrate consists of hole-patterned fringing-field-switching (FFS) pixel electrodes. A negative dielectric anisotropy LC is employed. In the voltage-on state, the LC directors are reoriented by the fringing fields surrounding the hole area and by the longitudinal and fringe fields outside the hole area. After design optimization, we are able to achieve 85% peak transmittance under crossed circular polarizers. During the relaxation process, the standing walls exert a strong restoring force, leading to submillisecond gray-to-gray response time. Moreover, this device enables high resolution density because only one thin-film transistor per pixel is needed and the bottom FFS electrode has built-in capacitor. This device is particularly attractive for the emerging virtual reality displays.