Ross Friel

Dr. Ross Friel

orcid

Research Focus & Metrics

Academic Career Length

18Years (2009-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 March 2017 in Applied Materials Today
Verified
Journal Article
Open access
Athanasios GoulasAthanasios Goulas
Athanasios Goulas
JBJon Binner
Jon Binner
RHRussell A. Harris
Russell A. Harris
RFRoss Friel
Ross Friel
This paper was published in the journal Applied Materials Today and the definitive published version is available at http://dx.doi.org/10.1016/j.apmt.2016.11.004.This research paper investigates the suitability of ceramic multicomponent materials, which are found on the Martian and Lunar surfaces, for 3D printing (aka Additive Manufacturing) of solid structures. 3D printing is a promising solution as part of the cutting edge field of future in‐situ space manufacturing applications.\ud 3D printing of physical assets from simulated Martian and Lunar regolith was successfully performed during this work by utilising laser‐based powder bed fusion equipment. Extensive evaluation of the raw regolith simulants was conducted via Optical and Electron Microscopy (SEM), Visible‐Near Infrared/Infrared (Vis‐NIR/IR) Spectroscopy and thermal characterisation via Thermogravimetric Analysis (TGA) and Differential Scanning Calorimetry (DSC). The analysis results led to the characterisation of key properties of these multicomponent ceramic materials with regards to their processability via powder bed fusion 3D printing.\ud The Lunar and Martian simulant regolith analogues demonstrated spectral absorbance values of up to 92% within the Vis‐NIR spectra. Thermal analysis demonstrated that these materials respond very differently to laser processing, with a high volatility (30% weight change) for the Martian analogue as opposed to its less volatile Lunar counterpart (<1% weight change). Results also showed a range of multiple thermal occurrences associated with melting, glass transition and crystallisation reactions. The morphological features of the powder particles are identified as contributing to densification limitations for powder bed fusion processing.\ud This investigation has shown that – provided that the simulants are good matches for the actual regoliths – the lunar material is a viable candidate material for powder bed fusion 3D printing, whereas Martian regolith is not

1 January 2013 in Procedia CIRP
Verified
Journal Article
Open access
RFRoss Friel
Ross Friel
RHR.A. Harris
R.A. Harris
This paper was published as Open Access by Elsevier under a CC-BY-NC-ND 3.0 licence.Ultrasonic Additive Manufacturing (UAM), or Ultrasonic Consolidation as it is also referred, is a hybrid form of manufacture,\ud primarily for metal components. The unique nature of the process permits extremely novel functionality to be realised such as\ud multi-material structures with embedded componentry. UAM has been subject to research and investigation at Loughborough\ud University since 2001. This paper introduces UAM then details a number of key findings in a number of areas that have been of\ud particular focus at Loughborough in recent years. These include; the influence of pre-process material texture on interlaminar\ud bonding, secure fibre positioning through laser machined channels, and freeform electrical circuitry integration

5 August 2020 in Journal of Synchrotron Radiation
Verified
Journal Article
Open access
PDF file
TUThomas Ursby
Thomas Ursby
KÅKarl Åhnberg
Karl Åhnberg
RARoberto Appio
Roberto Appio
OAOskar Aurelius
Oskar Aurelius
ABArtur Barczyk
Artur Barczyk
UMUwe Mueller
Uwe Mueller
BioMAX is the first macromolecular crystallography beamline at the MAX IV Laboratory 3 GeV storage ring, which is the first operational multi-bend achromat storage ring. Due to the low-emittance storage ring, BioMAX has a parallel, high-intensity X-ray beam, even when focused down to 20 µm × 5 µm using the bendable focusing mirrors. The beam is tunable in the energy range 5–25 keV using the in-vacuum undulator and the horizontally deflecting double-crystal monochromator. BioMAX is equipped with an MD3 diffractometer, an ISARA high-capacity sample changer and an EIGER 16M hybrid pixel detector. Data collection at BioMAX is controlled using the newly developed MXCuBE3 graphical user interface, and sample tracking is handled by ISPyB. The computing infrastructure includes data storage and processing both at MAX IV and the Lund University supercomputing center LUNARC. With state-of-the-art instrumentation, a high degree of automation, a user-friendly control system interface and remote operation, BioMAX provides an excellent facility for most macromolecular crystallography experiments. Serial crystallography using either a high-viscosity extruder injector or the MD3 as a fixed-target scanner is already implemented. The serial crystallography activities at MAX IV Laboratory will be further developed at the microfocus beamline MicroMAX, when it comes into operation in 2022. MicroMAX will have a 1 µm × 1 µm beam focus and a flux up to 1015 photons s−1 with main applications in serial crystallography, room-temperature structure determinations and time-resolved experiments.

1 March 2017 in Composites Part B: Engineering
Verified
Journal Article
Open access
JLJ. Li
J. Li
TMT. Monaghan
T. Monaghan
TNT.T. Nguyen
T.T. Nguyen
RKR.W. Kay
R.W. Kay
RFRoss Friel
Ross Friel
RHR.A. Harris
R.A. Harris

17 October 2016 in Rapid Prototyping Journal
Verified
Journal Article
Open access
Athanasios GoulasAthanasios Goulas
Athanasios Goulas
RFRoss Friel
Ross Friel
Purpose: The purpose of this paper is to investigate the effect of the main process parameters of laser melting (LM) type additive manufacturing (AM) on multi-layered structures manufactured from JSC-1A Lunar regolith (Moondust) simulant powder. Design/methodology/approach: Laser diffraction technology was used to analyse and confirm the simulant powder material particle sizes and distribution. Geometrical shapes were then manufactured on a Realizer SLM™ 100 using the simulant powder. The laser-processed samples were analysed via scanning electron microscopy to evaluate surface and internal morphologies, X-ray fluorescence spectroscopy to analyse the chemical composition after processing, and the samples were mechanically investigated via Vickers micro-hardness testing. Findings: A combination of process parameters resulting in an energy density value of 1.011 J/mm2 allowed the successful production of components directly from Lunar regolith simulant. An internal relative porosity of 40.8 per cent, material hardness of 670 ± 11 HV and a dimensional accuracy of 99.8 per cent were observed in the fabricated samples. Originality/value: This research paper is investigating the novel application of a powder bed fusion AM process category as a potential on-site manufacturing approach for manufacturing structures/components out of Lunar regolith (Moondust). It was shown that this AM process category has the capability to directly manufacture multi-layered parts out of Lunar regolith, which has potential applicability to future moon colonization.

1 September 2015 in Composites Part A: Applied Science and Manufacturing
Verified
Journal Article
Open access
TMT. Monaghan
T. Monaghan
ACA.J. Capel
A.J. Capel
SCS.D. Christie
S.D. Christie
RHR.A. Harris
R.A. Harris
RFRoss Friel
Ross Friel
This is an open access article under the CC BY license (http://\ud creativecommons.org/licenses/by/4.0/).The formation of smart, Metal Matrix Composite (MMC) structures through the use of solid-state Ultrasonic Additive Manufacturing (UAM) is currently hindered by the fragility of uncoated optical fibers under the required processing conditions. In this work, optical fibers equipped with metallic coatings were fully integrated into solid Aluminum matrices using processing parameter levels not previously possible. The mechanical performance of the resulting manufactured composite structure, as well as the functionality of the integrated fibers, was tested. Optical microscopy, Scanning Electron Microscopy (SEM) and Focused Ion Beam (FIB) analysis were used to characterize the interlaminar and fiber/matrix interfaces whilst mechanical peel testing was used to quantify bond strength. Via the integration of metallized optical fibers it was possible to increase the bond density by 20–22%, increase the composite mechanical strength by 12–29% and create a solid state bond between the metal matrix and fiber coating; whilst maintaining full fiber functionality