Background and Objectives: Poor sleep quality in patients with obstructive sleep apnea (OSA) may be associated with different clinical and polysomnographic features. The aim of this study was to identify features associated with poor sleep quality in OSA patients. Materials and Methods: This was a cross-sectional study enrolling patients with OSA confirmed by polysomnography (PSG). In addition to gathering clinical data, patients were assessed using the Pittsburgh Sleep Quality Index (PSQI), the Epworth Sleepiness Scale (ESS), and the Clinical Global Impression Scale. Univariate and multivariable analyses were performed to identify factors associated with an increased risk of poor sleep quality in this population. Results: Among 505 enrolled patients (mean age of 57.1 years, 69.7% male) poor quality of sleep (PSQI score ≥ 5) was confirmed in 68.9% of them. Multivariable analysis revealed the following factors associated with poor sleep quality: chronic heart failure (OR 3.111; 95% CI, 1.083–8.941, p = 0.035), male sex (OR 0.396; 95% CI, 0.199–0.787, p = 0.008), total ESS score (OR 1.193; 95% CI, 1.124–1.266, p < 0.001), minimal saturation during sleep (OR 1.034; 95% CI, 1.002–1.066, p = 0.036), and N3 percentage of total sleep time (OR 1.110; 95% CI, 1.027–1.200, p = 0.009). Conclusions: Our study suggests that both the female sex and coexistence of heart failure are independent risk factors for poor sleep quality. Moreover, we hypothesize that nocturnal hypoxia may lead to a misperception of sleep quality and may explain the counterintuitive association between a higher proportion of deep sleep and poor sleep quality.

The integrated casting and rolling of plates in processes such as ISP or AST is the latest and very efficient method of hot strip production. The subject of the presented article is the modelling of steel behaviour at temperatures characteristic for the mentioned rolling technologies, which exceed the standard hot rolling temperature range. Numerical modelling can be very helpful in developing ‘know how’ theory for the mentioned processes. One of the most important relationships having a crucial influence on the metal flow path is the strain–stress curve. It is not easy to construct isothermal curves for a selected temperature range. The inverse method, which is usually applied for calculation of the real strain-stress relationship, needs a good mathematical model describing the plastic behaviour of the material. The model presented in the current article fills the gap in the modelling of plastic deformation of semi-solid materials. The methodology of constructing strain–stress curves is presented, as well. On the other hand, the mathematical modelling should be closely related to experiments. The only well-known method allowing laboratory tests in the discussed temperature range (over 1400°C) is the deformation of cylindrical samples using GLEEBLE thermo-mechanical simulator. However, experiments of steel deformation in semi-solid state by using this machine are very expensive. Therefore, application of a dedicated computer simulation system with an inverse method makes the tests possible in the first place and it also results in lowering testing costs.

This paper presents an assessment of the possibility of using digital image classifiers for tomographic images concerning ductile iron castings. The results of this work can help the development of an efficient system suggestion allowing for decision making regarding the qualitative assessment of the casting process parameters. Special attention should be focused on the fact that automatic classification in the case of ductile iron castings is difficult to perform. The biggest problem in this aspect is the high similarity of the void image, which may be a sign of a defect, and the nodular graphite image. Depending on the parameters, the tests on different photos may look similar. Presented in this article are test scenarios of the module analyzing two-dimensional tomographic images focused on the comprehensive assessment by convolutional neural network models, which are designed to classify the provided image. For the purposes of the tests, three such models were created, different from each other in terms of architecture and the number of hyperparameters and trainable parameters. The described study is a part of the decision-making system, supporting the process of qualitative analysis of the obtained cast iron castings.

The work presents a tool enabling the selection of powder for 3D printing. The project focused on three types of powders, such as steel, nickel- and cobalt-based and aluminum-based. An important aspect during the research was the possibility of obtaining the mechanical parameters. During the work, the possibility of using the selected algorithm based on artificial intelligence like Random Forest, Decision Tree, K-Nearest Neighbors, Fuzzy K-Nearest Neighbors, Gradient Boosting, XGBoost, AdaBoost was also checked. During the work, tests were carried out to check which algorithm would be best for use in the decision support system being developed. Cross-validation was used, as well as hyperparameter tuning using different evaluation sets. In both cases, the best model turned out to be Random Forest, whose F1 metric score is 98.66% for cross-validation and 99.10% after tuning on the test set. This model can be considered the most promising in solving this problem. The first result is a more accurate estimate of how the model will behave for new data, while the second model talks about possible improvement after optimization or possible overtraining to the parameters.

The article presents the optimization of high-pressure die casting process technology for equestrian stirrups with the application of computer simulation. In the initial stage, the output technology was analyzed, and on the basis of a series of virtual experiments the cause of defects in the casting was highlighted. The optimization process includes different designs of a gating system. Additionally, the casting application properties were evaluated in an exploitation simulation, taking into account predicted defects resulting from the casting and solidification process. Based on the conducted analyses, technological changes were made to the casting technology design allowing the defects occurring in the original technological concept to be removed.

The aim of this research was to develop a solution based on existing methods and tools that would allow the automatic classification of selected images of cast iron microstructures. As part of the work, solutions based on artificial intelligence were tested and modified. Their task is to assign a specific class in the analyzed microstructure images. In the analyzed set, the examined samples appear in various zoom levels, photo sizes and colors. As is known, the components of the microstructure are different. In the examined photo, there does not have to be only one type of precipitate in each photo that indicates the correct microstructure of the same type of alloy, different shapes may appear in different amounts. This article also addresses the issue of data preparation. In order to isolate one type of structure element, the possibilities of using methods such as HOG (histogram of oriented gradients) and thresholding (the image was transformed into black objects on a white background) were checked. In order to avoid the slow preparation of training data, our solution was proposed to facilitate the labeling of data for training. The HOG algorithm combined with SVM and random forest were used for the classification process. In order to compare the effectiveness of the operation, the Faster R-CNN and Mask R-CNN algorithms were also used. The results obtained from the classifiers were compared to the microstructure assessment performed by experts.