A series of titanium-based, metal–organic framework (MOF) materials, xM@NH2-MIL125(Ti) (x is the alkali metal loading percentage during the synthesis; M = Li, Na, K), have been synthesized solvothermally. Alkali metal doping in the NH2–MIL125(Ti) in situ solvothermal process demonstrated a vital modification of the material structure and surface morphology for the CO2 adsorption capacity at ambient conditions. By changing the reactants’ precursor, including different kinds of alkali metal, the morphology of xM@NH2–MIL125(Ti) can be adjusted from a tetragonal plate through a circular plate to a truncated octahedron. The variation of the alkali metal loading results in substantial differences in the CO2 adsorption. The properties of xM@NH2–MIL125(Ti) were evaluated via functional group coordination using FT-IR, phase identification based on X-ray diffraction (XRD), surface morphology through scanning electron microscopy (SEM), as well as N2 and CO2 adsorption by physical gas adsorption analysis. This work reveals a new pathway to the modification of MOF materials for high-efficiency CO2 adsorption.
Based on the three-dimensional network structure of a polymer and the principle of photocatalysts, a visible-light-responsive and durable photocatalytic coating for the degradation of vehicle exhaust (VE) has been constructed using a waterborne acrylic acid emulsion as the coating substrate; Fe/N/Co–TiO2 nanoparticles (NPs) as photocatalytic components; and water, pigments, and fillers as additives. The visible-light-responsive Fe/N/Co–TiO2 NPs with an average size of 100 nm were prepared by sol-gel method firstly. The co-doping of three elements extended the absorption range of the modified TiO2 nanoparticles to the visible light region, and showed the highest light absorption intensity, which was confirmed by the ultraviolet-visible absorption spectra (UV-Vis). X-ray diffraction (XRD) measurements showed that element doping prevents the transition from anatase to rutile and increases the transition temperature. TiO2 was successfully doped due to the reduction of the chemical binding energy of Ti, as revealed by X-ray photoelectron spectroscopy (XPS). The degradation rates of NOX, CO, and CO2 in VE by Fe/N/Co–TiO2 NPs under visible light were 71.43%, 23.79%, and 21.09%, respectively. In contrast, under the same conditions, the degradation efficiencies of coating for VE decreased slightly. Moreover, the elementary properties of the coating, including pencil hardness, adhesive strength, water resistance, salt, and alkali resistance met the code requirement. The photocatalytic coating exhibited favorable reusability and durability, as shown by the reusability and exposure test.
In order to improve the initial color and the long-term heat stability of super-transparent polyvinyl chloride (PVC), a series of composite heat stabilizers consisting of unsaturated Zn oleate and uracil derivatives have been designed in this paper. The uracil derivatives are 1,3-dimethyl-6-amino-uracil (DAU) and 6,6′-diamino-1,1′,3,3′-tetramethyl-5,5′-(ethylidene)bisuracil (OSU). The static thermal stability, dynamic thermal stability, and transparency were used to evaluate the properties of the stabilized transparent PVC sheets. The results indicate that the compatibility between the stabilizer and PVC was greatly enhanced by introducing an unsaturated long-chain Zn oleate and a long alkyl chain bisuracil derivative. Through the thermal discoloration test, the best ratio of DAU/zinc oleate (DAU/Zn) and OSU/zinc oleate (OSU/Zn) was determined to be 4:1, with a total amount of 3 phr in 100 phr PVC. It was verified that the combination of zinc oleate with uracil derivatives could improve the long-term thermal stability of PVC, and the DAU/Zn was better than that of the OSU/Zn. In addition, through the transmission/haze verification, adding a proper amount of epoxidized soybean oil (ESBO) and phosphite ester to the OSU/Zn system has a certain synergistic effect. The thermal stability and transparency of PVC can be remarkably enhanced.
27 January 2025 in Construction and Building Materials