Subambient daytime radiative cooling enables temperatures to passively reach below ambient temperature, even under direct sunlight, by emitting thermal radiation toward outer space. This technology holds promise for numerous exciting applications. However, previous demonstrations of subambient daytime radiative cooling require surfaces that directly face the sky, and these cannot be applied to vertical surfaces that are ubiquitous in real-world scenarios such as buildings and vehicles. Here, we demonstrate subambient daytime radiative cooling of vertical surfaces under peak sunlight using a hierarchically designed, angularly asymmetric, spectrally selective thermal emitter. Under peak sunlight of about 920 watts per square meter, our emitter reaches a temperature that is about 2.5°C below ambient temperature, corresponding to a temperature reduction of about 4.3° and 8.9°C compared with a silica-polymer hybrid radiative cooler and commercial white paint, respectively.
Single-mode long-wavelength (LW) vertical-cavity surface-emitting lasers (VCSELs) present an inexpensive alternative to DFB-lasers for data communication in next-generation giga data centers, where optical links with large transmission distances are required. Narrow wavelength-division multiplexing systems demand large bit rates and single longitudinal and transverse modes. Spatial division multiplexing transmission through multicore fibers using LW VCSELs is enabling still larger-scale data center networks. This review discusses the requirements for achieving high-speed modulation, as well as the state-of-the-art. The hybrid short-cavity concept allows for the realization of f3dB frequencies of 17 GHz and 22 GHz for 1300 nm and 1550 nm range VCSELs, respectively. Wafer-fusion (WF) concepts allow the realization of long-time reliable LW VCSELs with a record single-mode output power of more than 6 mW, 13 GHz 3 dB cut-off frequency, and data rates of 37 Gbit/s for non-return-to-zero (NRZ) modulation at 1550 nm.
14 October 2014 in Journal of the Optical Society of America B
The behavior of optical bistability (OB) in linear triple quantum dot molecules (QDMs) using double tunneling coupling by means of a unidirectional ring cavity is investigated. The linear and nonlinear susceptibilities of the system are also investigated. The double tunneling between the quantum dots can induce the interaction of double dark resonances, which can enhance the nonlinear response of the system. The type, the hysteresis loop, and the threshold of OB can be controlled by the intensity of the double tunneling and the detuning of the probe field. Our results give insights for future experiments and applications in optics using QDMs.
A scheme for giant Kerr nonlinearity via tunneling in triangular triple quantum dot molecules is proposed. In such a system, the linear absorption and the Kerr nonlinearity depend critically on the energy splitting of the excited states and the tunneling intensity. With proper parameters, giant Kerr nonlinearity accompanied by vanishing absorption can be realized. The enhancement of Kerr nonlinearity is attributed to the interacting double dark resonances induced by the tunneling between the quantum dots, requiring no extra coupling laser fields.
A detailed experimental analysis of the impact of device topology on the performance of 1550 nm VCSELs with an active region based on thin InGaAs/InAlGaAs quantum wells and a composite InAlGaAs buried tunnel junction is presented. The high-speed performance of the lasers with L-type device topology (with the largest double-mesa sizes) is mainly limited by electrical parasitics showing noticeable damping of the relaxation oscillations. For the S-type device topology (with the smallest double-mesa sizes), the decrease in the parasitic capacitance of the reverse-biased p+n-junction region outside the buried tunnel junction region allowed to raise the parasitic cutoff frequency up to 13–14 GHz. The key mechanism limiting the high-speed performance of such devices is thus the damping of the relaxation oscillations. VCSELs with S-type device topology demonstrate more than 13 GHz modulation bandwidth and up to 37 Gbps nonreturn-to-zero data transmission under back-to-back conditions at 20 °C.
The nonlinearity of semiconductor quantum dots under the condition of low light levels has many important applications. In this study, linear absorption, self-Kerr nonlinearity, fifth-order nonlinearity and cross-Kerr nonlinearity of multiple quantum dots, which are coupled by multiple tunneling, are investigated by using the probability amplitude method. It is found that the linear and nonlinear properties of multiple quantum dots can be modified by the tunneling intensity and energy splitting of the system. Most importantly, it is possible to realize enhanced self-Kerr nonlinearity, fifth-order nonlinearity and cross-Kerr nonlinearity with low linear absorption by choosing suitable parameters for the multiple quantum dots. These results have many potential applications in nonlinear optics and quantum information devices using semiconductor quantum dots.