The advancement of acoustic metamaterials enables the highly efficient absorption of low-frequency noise with a subwavelength structure thickness, but the complexity of these structures often hinders their large-scale practical applications. Here, we propose a straightforward and compact acoustic metamaterial structure composed of Helmholtz resonators with side slits (HRSS) for low-frequency noise absorption. The introduction of side slits not only simplifies the overall structure but also allows for easy adjustment of acoustic characteristics. By adjusting the depth of the resonator within the slit across 25 distinct units, an absorption coefficient above 0.8 is realized from 470 to 930 Hz. This work demonstrates the extensive low-frequency sound absorption capability of HRSS, providing valuable insights into the design of future practical acoustic materials.
The quality inspection of micro solder joints in laser spot welding (LSW) is a problem of great concern in industrial application. In this paper, a laser ultrasonic technology (LUT) was proposed to inspect the quality of micro solder joints in LSW. Firstly, based on the thermoelastic model of acoustic wave propagation in solid, a theoretical model was built and used to analyze the propagation properties of the Lamb wave in the whole field by finite element method (FEM), the transmitting properties of the excited Lamb wave via solder joint were affected by the effective contacted area of solder joint. Secondly, LUT was used to inspect the 1.2 mm/0.4 mm welding spot of standard/false 304 stainless steel welded components. By comparing the propagating properties of excited ultrasonic wave in different samples with different weld quality, the standard and false welding can be visually distinguished. Finally, a industrial CT was used to check the quality of the samples used in our experiment. Inclusions and pores have been found in the false solder joints, which will reduce the effective contacted area of solder joint, and then affected the propagation of ultrasonic wave. By combining the CT results and the experimental analysis, the experimental results detected by LUT are in good agreement with the simulation results. So, the LUT is a potential method in field of the quality inspection of micro solder joints in LSW.
A stroboscopic full-field imaging technique based on photorefractive interferometry for the visualization of rapidly changing surface displacement fields by using of a standard charge-coupled device (CCD) camera is presented. The photorefractive buildup of the space charge field during and after probe laser pulses is simulated numerically. The resulting anisotropic diffraction upon the refractive index grating and the interference between the polarization-rotated diffracted reference beam and the transmitted signal beam are modeled theoretically. The method is experimentally demonstrated by full-field imaging of the propagation of photoacoustically generated surface acoustic waves with a temporal resolution of nanoseconds. The surface acoustic wave propagation in a 23 mm × 17 mm area on an aluminum plate was visualized with 520 × 696 pixels of the CCD sensor, yielding a spatial resolution of 33 μm. The short pulse duration (8 ns) of the probe laser yields the capability of imaging SAWs with frequencies up to 60 MHz.
Early detection and monitoring of heavy load induced plastic deformation in the structure is crucial for timely intervention before cracking occurs and the material completely fails. Ultrasound can be used for detecting plastic deformation provided the mechanical modulus, which can be probed via changes in velocities. This work presents a measurement scheme that makes use of optically detected, laser-induced surface acoustic waves (SAWs) for remote, real-time, online monitoring of the wave velocity during the elastic–plastic transition occurring in an aluminum plate undergoing a uniaxial tensile test and a dynamic fatigue test. Monochromatic SAWs were photoacoustically generated in a wavelength-controlled way through a transient thermal grating based laser ultrasonics excitation scheme. The SAWs were detected by a home-built photorefractive interferometer. The results reveal both regions of acceleration and slowing down, indicating that the material first stiffens and then starts to form microcracks that make it behave effectively softer for propagating SAWs.
Anisotropic density-near-zero (ADNZ) metamaterials, with only one component of the mass density tensor near zero, have been proposed and used to manipulate the flow of the acoustic energy in designed paths. In the inhomogeneous ADNZ metamaterials, a strong averaging effect on the non-zero component of the mass density tensor is theoretically and numerically demonstrated. Based on this effect, the acoustic intensity vector, which represents the average direction and magnitude of the acoustic energy flow, can be manipulated by simply designing the spatial profile of the non-zero mass density component. This method provides more possibilities in controlling the acoustic intensity in almost an arbitrary way.