Unmanned aerial vehicles (UAVs) have attracted great interest in rapid deployment for both civilian and military applications. The conventional UAV monopulse tracking technique requires dedicated pulses which suffer from multipath effect in air-to-ground (A2G) link with low elevation angles, whereas the orthogonal frequency division multiplexing (OFDM) for A2G high rate communication under frequency selective fading channel was not yet investigated for UAV target tracking at ground station. In this paper, we propose a single-channel monopulse tracking (SCMT) angle estimation method in OFDM tracking receiver exploiting squareand absolute-value nonlinear detection of amplitude-modulated difference signals. Extensive simulations are conducted to validate the proposed estimation method in terms of estimation range and estimation root mean squared error (RMSE). Results show that, the proposed angle estimation method exhibits S-shaped curve characteristic under different angle errors, which is insensitive to channels and modulations. The proposed method obtains angle estimation RMSEs smaller than 0.18° for antenna element distanced = 0.5 m with 10 MHz OFDM signals. For both squareand absolute-value methods, a maximum degradation of 0.02° for angle estimation RMSEs is observed under Rician channels compared with the estimation under additive white Gaussian noise (AWGN) channels, whereas the absolute-value estimation outperforms the square-value estimation.
A time-domain ranging algorithm is proposed for a frequency-modulated continuous wave (FMCW) short-range radar sensor with high accuracy and low complexity. The proposed algorithm estimates the distance by calculating the ratio of the beat frequency signal to its derivative and thereby eliminates the restriction of frequency bandwidth on ranging accuracy. Meanwhile, we provide error analysis of the proposed algorithm under different distances, integral lengths, relative velocities, and signal-to-noise ratios (SNRs). Finally, we fabricate FMCW sensor prototype and construct a measurement system. Testing results demonstrate that the proposed time-domain algorithm could achieve range error within 0.8 m. Compared with the conventional fast Fourier transform (FFT) estimation scheme, the proposed method performs ranging without the requirement of complex multiplications, which makes it reasonable to be implemented in real-time and low-cost systems.
Ground-based positioning systems are necessary as the conventional satellite-based systems suffer from weak received signals. In this paper, we proposed a precise ranging method in single-carrier frequency domain equalization (SC-FDE) system using the amplitude nonlinearity of oversampled signals. A new pattern of the preamble and the unique word was designed for SC-FDE system, where the preamble can be exploited in correlation-based timing algorithm to obtain impulse-like timing metric. Combining with the coarse timing procedure, we proposed a fine ranging method relying on the oversampled signals in SC-FDE receiver employing $Q$ th-power nonlinearity, and then analyzed its estimation mean and variance. The extensive simulations were conducted to validate the proposed method with distinct modulation schemes, rolling-off factors, block lengths, and nonlinearity factors. The results show that the proposed ranging method can achieve unbiased estimate and its root mean square errors will reach the order of centimeter at medium-to-high signal-to-noise ratio region in flat-fading channels, whereas the observed performance degradation in frequency selective channel can be mitigated by using equalized oversampled signals.
The localization accuracy demand is ever growing in UAV communication networks. We propose a joint coarse and fine range estimation method using single carrier burst signals with two samples per symbol for UAV networks. The coarse estimation of our joint estimation method exploits multiple preamble symbols for flexible single-carrier frequency-domain equalization (SC-FDE) frame structures to calculate correlation metrics, which are insensitive to frequency offset due to the differential correlation operation. Then, we propose a fine range estimation method using only two samples per symbol with expectation relying on shaping or matched filter. Furthermore, we derive the performance bounds for the ranging system using both raised cosine (RC) and better than raised-cosine (BTRC) pulses. Finally, extensive simulations are conducted to validate the proposed method in terms of estimate bias and variance for different modulations, shaping filters, and fading channels. Our simulation results show that, the root mean square errors of proposed ranging method can reach the order of centimeter at medium-to-high signal-to-noise ratio (SNR) region, whereas the case using BTRC filter is capable of enhancing the ranging performance at low SNRs.
The precise ranging of ultra-wideband (UWB) fuzes relies on extracting time delay information from echo signals. However, ground multipath propagation effects induce a significant time-delay spread in the echo signals. This manifests as a channel impulse response (CIR) composed of numerous, closely spaced components, creating a challenging super-resolution problem that severely constrains the ranging accuracy and reliability of the fuze. Therefore, accurately estimating the CIR that characterizes these multipath structures from a single echo observation is crucial for the UWB fuze to perceive terrain structures and enhance ranging capabilities. This study proposes the following methods: (1) establishing an equivalent discrete multipath model(EDMM) of the ground to characterize the CIR; (2) proposing a sparse blind deconvolution(SBD) method via the ADMM-based framework under an asymmetric structured prior (ASP), which employs parametric projections to constrain the physical morphology of the unknown source signal, and designing a periodic sparse cluster projection operator to achieve super-resolution recovery of the discrete multipath structure of the channel h by enforcing the EDMM prior. Through three-variable robust decomposition, it actively separates dispersed clutter and enhances performance under low signal-to-noise ratio (SNR) conditions. Experimental results from both simulations and measured data demonstrate that the proposed algorithm exhibits excellent robustness and recovery accuracy in complex low-SNR scenarios, providing a foundational offline analysis method for understanding complex channel characteristics and guiding the development of improved real-time ranging algorithms.