This review summarizes all studies which used dielectric-based materials as a passivation layer at the rear surface of copper indium gallium (di)selenide, Cu(In,Ga)Se2, (CIGS)-based thin film solar cells, up to 2019. The results regarding the kind of dielectric materials, the deposition techniques, contacting approaches, the existence of additional treatments, and current–voltage characteristics (J–V) of passivated devices are emphasized by a detailed table. The techniques used to implement the passivation layer, the contacting approach for the realization of the current flow between rear contact and absorber layer, additional light management techniques if applicable, the solar simulator results, and further characterization techniques, i.e., external quantum efficiency (EQE) and photoluminescence (PL), are shared and discussed. Three graphs show the difference between the reference and passivated devices in terms of open-circuit voltage (Voc), short-circuit current (Jsc), and efficiency (η), with respect to the thicknesses of the absorber layer. The effects of the passivation layer at the rear surface are discussed based on these three graphs. Furthermore, an additional section is dedicated to the theoretical aspects of the passivation mechanism.
Ge alloying in kesterite thin films enables to mitigate electronic defect and disorder, enhance morphology as well as realize bandgap grading, all contributing to higher performance of complete solar cells via resolved Voc and fill factor deficits.
In this paper, we propose a facile and large scale compatible design to obtain perfect ultrabroadband light absorption using metal-dielectric core–shell nanowires. The design consists of atomic layer deposited (ALD) Pt metal uniformly wrapped around hydrothermally grown titanium dioxide (TiO2) nanowires. It is found that the randomly oriented dense TiO2 nanowires can impose excellent light trapping properties where the existence of an ultrathin Pt layer (with a thickness of 10 nm) can absorb the light in an ultrabroadband frequency range with an amount near unity. Throughout this study, we first investigate the formation of resonant modes in the metallic nanowires. Our findings prove that a nanowire structure can support multiple longitudinal localized surface plasmons (LSPs) along its axis together with transverse resonance modes. Our investigations showed that the spectral position of these resonance peaks can be tuned with the length, radius, and orientation of the nanowire. Therefore, TiO2 random nanowires can contain all of these features simultaneously in which the superposition of responses for these different geometries leads to a flat perfect light absorption. The obtained results demonstrate that taking unique advantages of the ALD method, together with excellent light trapping of chemically synthesized nanowires, a perfect, bifacial, wide angle, and large scale compatible absorber can be made where an excellent performance is achieved while using less materials.
In this work, hafnium oxide layer is investigated as rear surface passivation layer for ultra-thin (550 nm) CIGS solar cells. Point contact openings in the passivation layer are realized by spin-coating potassium fluoride prior to absorber layer growth. Contacts are formed during absorber layer growth and visualized with scanning electron microscopy (SEM). To assess the passivating qualities, HfOx was applied in a metal-insulator-semiconductor (MIS) structure, and it demonstrates a low interface trap density in combination with a negative density of charges. Since we used ultra-thin devices that are ideal to probe improvements at the rear, solar cell results indicated improvements in all cell parameters by the addition of 2 nm thick HfOx passivation layer with contact openings.
A simplified Cu(In, Ga)Se2 (CIGS) solar cell structure based on a 500 nm thin CIGS layer is presented. The absorber layers are grown with a single-stage coevaporation process, and various KF post-deposition treatments (KF-PDT) are performed. The KF-PDT leads to an efficiency increase from 7% to 12%. For all cells an increase in open circuit voltage (Voc) and fill factor is measured, which is attributed to an improved pn junction. By changing the annealing conditions, an additional Voc increase is measured. This increase is attributed to the reduction of light-induced defects at the CIGS/CdS interface in addition to the improved pn junction. A reduction of defects is confirmed by reduced sub band gap emission in the photoluminescence spectra, an increased decay time, and increased quasi Fermi level splitting. With SCAPS the results are simulated, and it is concluded that after KF-PDT the Voc is limited to 640 mV due to recombination at the back contact. A higher Voc can then only be achieved by applying a passivation layer at the back. There are no indications that the single-stage process is limiting the efficiency, revealing the potential of the proposed simplified CIGS structure and the importance of interfaces for ultrathin CIGS solar cells.