The periodicity and density of atomic arrangement vary with the crystal orientation, which results in different deformation mechanisms and mechanical properties of γ-TiAl. In this paper, the anisotropic characteristics for γ-TiAl with (100), ( ) and (111) surfaces during nanoindentation at 300 K have been investigated by molecular dynamics simulations. It is found that there is no obvious pop-in event in all load-depth curves when the initial plastic deformation of γ-TiAl samples occurs, because the dislocation nucleates before the first load-drop; while a peak appears in both the unloading curves of the ( ) and (111) samples due to the release of energy. Stacking faults, twin boundaries and vacancies are formed in all samples; however, interstitials are formed in the (100) sample, a stacking fault tetrahedron is formed in the (111) sample; and two prismatic dislocation loops with different activities are formed in the ( ) and (111) samples, respectively. It is also concluded that the values of the critical load, strain energy, hardness and elastic modulus for the (111) sample are the maximum, and for the (100) sample are the minimum. Furthermore, the orientation dependence of the elastic modulus is greater than the hardness and critical load.
21 February 2019 in Science China Technological Sciences
In this work, the plastic deformation mechanisms and fracture toughness of nanotwinned γ-TiAl with different twin boundary (TB) spacing are investigated by using molecular dynamics simulation. The simulation results reveal that there are pronounced shifts in the mechanical behaviour of nanotwinned γ-TiAl when the TB spacing is 3.50, 4.20 and 4.90 nm. In addition, the variation of the dislocation density with strain at these three TB spacing illustrates that a smaller TB spacing induces a higher dislocation density. Different TB spacing has an influence on the dislocation behaviour. The dislocation pile-up, dislocation–dislocation, dislocation–twin and twin–twin reactions, hierarchical twins including their generation and density, step formation, dislocation emission from steps and TB migration are the main plastic deformation mechanisms. The results also show that TB migration, twinning formation and interaction of crack and TB dominate the deformation mechanism of nanotwinned γ-TiAl with crack. The generation of hierarchical twins, lower distance between crack surface plane and twin plane, dislocation–twin, twin–twin interaction and crack deflection increase the fracture toughness of nanotwinned γ-TiAl.
Cold deformation behavior of polycrystalline metallic material is affected by intrinsic defects such as dislocations, voids, inclusions etc. Existing studies on + two-phase Ti–Al alloy cover about deformation behavior mainly on macro scale. This paper focuses on the cold deformation mechanism of two-phase Ti–Al alloy at micro scale, and the role of voids in deformation process. Molecular dynamics simulations were performed to study the evolution of micro structure of material under uniaxial tension. Interaction between spherical nano voids with different size and position was also examined in the simulation. The results show that (1) In elastic stage, deformation of the two-phase is coordinated, but is more deformable; (2) In plastic stage, phase is the major dislocation source in two-phase alloy; (3) voids detracts the strength of the two-phase alloy, while the position of void affect the degree of this subtraction, voids located at the boundary of / phase have significant detraction to strength.