For 3D printing based on Digital Light Processing (DLP) technology, the tradeoff of size and resolution remains challenging due to the limitations of the existing techniques. Therefore, we propose an approach to improve the feature resolution without sacrificing the part size. It is achieved by changing the projection distance and then adjusting the projection resolution and format, which is different from the previous printing principle of fixed resolution. To achieve this process, the tripteron 3-Degree-of-Freedom (3-DoF) parallel mechanism is innovatively applied to the DLP 3D printing structure, which simplifies the control process. Since the projection is fixed on the motion platform, the projection distance changes as the platform moves in space. Then the PLC-based program is developed according to the motion process, which successfully runs on the established prototype. Finally, the experiments are designed through the orthogonal method to optimize the molding process parameters. The effectiveness of the approach is verified by the feature forming comparison experiment. The results show that it can reduce the size of features by about 1.3 times through adjusting the projection resolution under the same size parts. Our method provides a new way for solving the contradiction, but more research needs to be done.
The 3D printing method based on digital light processing (DLP) technology can transform liquid resin materials into complex 3D models. However, due to the limitations of digital micromirror device (DMD) specifications, the normal DLP 3D printing method (NDPM) cannot simultaneously process large-size and small-feature parts. Therefore, a scalable DLP 3D printing method (SDPM) was proposed. Different printing resolutions for a part were designed by changing the distance between the projector and the molding liquid level. A scalable DLP printer was built to realize the printing resolution requirements at different sizes. A series of experiments were performed. Firstly, the orthogonal experimental method was used, and the minimum and maximum projection distances were obtained as 20.5 cm and 30.5 cm, respectively. Accordingly, the layer thickness, exposure time, and waiting leveling time were 0.08 mm, 3 s, and 6 s and 0.08 mm, 7 s, and 10 s. Secondly, single-layer column feature printing was finished, which was shown to have two minimum printing resolutions of 101 μm and 157 μm at a projection distance of 20.5 cm and 30.5 cm. Thirdly, a shape accuracy test was conducted by using the SDPM. Compared with the NDPM, the shape accuracy of the small-feature round, diamond, and square parts was improved by 49%, 42%, and 2%, respectively. This study verified that the SDPM can build models with features demonstrating high local shape accuracy.
Piezoelectric tilt mirrors are crucial components of precision optical systems. However, the intrinsic hysteretic nonlinearity of the piezoelectric actuator severely restricts the control accuracy of these mirrors and the overall performance of the optical system. This paper proposes an improved Gray Wolf Optimization (GWO) algorithm for high-accuracy identification of hysteresis model parameters based on the Bouc–Wen (BW) differential equation. The proposed algorithm accurately describes the intrinsic hysteretic nonlinear behavior of piezoelectric tilt mirrors. A logistic chaotic mapping method is introduced for population initialization, while a nonlinear convergence factor and a Levy flight strategy are incorporated to enhance global search capabilities during the later stages of optimization. These modifications enable the algorithm to effectively identify BW model parameters for piezoelectric nonlinear systems. Compared to conventional Particle Swarm Optimization (PSO) and standard GWO, the improved algorithm demonstrates faster convergence, higher accuracy, and superior ergodicity, making it a promising tool for solving optimization problems, such as parameter identification in piezoelectric hysteresis systems. This work provides a robust approach for improving the precision and reliability of piezoelectric-driven optical systems.
2 April 2025 in Journal of Dynamics, Monitoring and Diagnostics
Any malfunctions of the actuators of the robots have the potential to destroy the robot's normal motion,and most of the current actuator fault diagnosis methods are difficult to meet the requirements of simplifying the actuator modeling and solving the difficulty of fault data collection. To solve the problem of real-time diagnosis of actuator faults in the 3-PR(P)S parallel robot, the model of 3-PR(P)S parallel robot and data-driven-based method for the fault diagnosis is presented. Firstly, only the input-output relationship of the actuator is considered for modelling actuator faults, reducing the complexity of fault modelling and reduces the time consumption of parameter identification, thereby meeting the requirements of real-time diagnosis. A Simulink model of the electromechanical actuator (EMA) was constructed to analyze actuator faults. Then the Short-term analysis method is employed for collecting the sample data of the slider position on the test platform of the EMA system and feature extraction. Training samples for neural networks are obtained. Furthermore, we optimized the Back Propagation (BP) neural network using the Dung Beetle Optimization Algorithm (DBO), which effectively resolved the weights and thresholds of the BP neural network. Compared to BP and PSO-BP, the DBO-BP has better convergence, convergence rate, and the best-classifying quality. So, the classification for the different actuator faults is obviously improved. Finally, a fault diagnosis system was designed for the actuator of the 3-PR(P)S parallel robot, and the experimental results demonstrate that this system can detect actuator faults within 0.1 seconds. This work also provides the technical support for the fault-tolerant control of the 3-PR(P)S Parallel robot. Conflict of Interest Statement The authors declare no conflicts of interest.
Optical image stabilization (OIS) is crucial for improving airborne opto-electronic imaging performance under dynamic conditions. This study presents a two-dimensional piezoelectric-driven OIS platform capable of compensating linear image shift errors. A motion platform integrating a bridge amplification mechanism and right-angle guiding beams was developed, and its theoretical model was validated through finite element analysis (FEA). To enhance the platform’s repeatability, the hysteresis of the piezoelectric actuator was described using the Bouc-Wen model, and was optimized using a Hybrid Genetic Algorithm and Particle Swarm Optimization (HGAPSO). Experimental results demonstrated that the platform achieves a workspace of 53.92 μm × 53.76 μm, a motion resolution of 30 nm, a maximum coupling error of 2.28%, and a first-order resonant frequency of 356.69 Hz. A composite controller incorporating HGAPSO attained submicron tracking accuracy, with errors of 0.43 μm and 0.47 μm along the X and Y axes, respectively. Strong agreement among theoretical analysis, FEA, and experimental results confirms the platform’s precision and effectiveness meeting the requirements of the OIS. This work provides valuable guidance for the development of high-frequency OIS systems in highly dynamic operational environments.