Olga Rac-Rumijowska

Dr. Olga Rac-Rumijowska

orcid

Research Focus & Metrics

Academic Career Length

17Years (2010-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 February 2019 in Materials
Verified
Journal Article
Open access
PDF file
IKIwona Karbownik
Iwona Karbownik
OROlga Rac-Rumijowska
Olga Rac-Rumijowska
Marta Fiedot-TobołaMarta Fiedot-Toboła
Marta Fiedot-Toboła
TRTomasz Rybicki
Tomasz Rybicki
HTHelena Teterycz
Helena Teterycz
The paper presents a method of modifying polyacrylonitrile (PAN) fibers using polyaniline (PANI). The PAN fibers were doped with polyaniline that was obtained in two different ways. The first consisted of doping a spinning solution with polyaniline that was synthesized in an aqueous solution (PAN/PANI blended), and the second involved the synthesis of polyaniline directly in the spinning solution (PAN/PANI in situ). The obtained fibers were characterized by the methods: X-ray powder diffraction (XRD), scanning electron microscope (SEM), fourier-transform infrared spectroscopy (FTIR), thermogravimetry (TG) and differential scanning calorimetry (DSC). Analysis of the results showed strong interactions between the nitrile groups of polyacrylonitrile and polyaniline in the PAN/PANI in situ fibers. The results of mechanical strength tests indicated that the performance of the PAN/PANI mixture significantly improved the mechanical parameters of polyaniline, although these fibers had a weaker strength than the unmodified PAN fibers. The fibers obtained as a result of the addition of PANI to PAN were dielectric, whereas the PANI-synthesized in situ were characterized by a mass-specific resistance of 5.47 kΩg/cm2.

30 April 2018 in Materials
Verified
Journal Article
Open access
PDF file
Marta Fiedot-TobołaMarta Fiedot-Toboła
Marta Fiedot-Toboła
MCMagdalena Ciesielska
Magdalena Ciesielska
Irena MaliszewskaIrena Maliszewska
Irena Maliszewska
OROlga Rac-Rumijowska
Olga Rac-Rumijowska
PSPatrycja Suchorska-Woźniak
Patrycja Suchorska-Woźniak
Marek BryjakMarek Bryjak
Marek Bryjak
A surface modification of polyamide 6 (PA), polyethylene terephthalate (PET) and polypropylene (PP) textiles was performed using zinc oxide to obtain antibacterial layer. ZnO microrods were synthesized on ZnO nanoparticles (NPs) as a nucleus centers by chemical bath deposition (CBD) process. Scanning Electron Microscopy (SEM) and X-ray diffraction (XRD) indicated that wurzite ZnO microrods were obtained on every sample. Differential Scanning Calorimetry (DSC), Fourier Transform Infrared Spectroscopy (FTIR), Atomic Force Microscopy (AFM) and Liquid Absorption Capacity (LAC) analysis indicate that the amount and structure of antibacterial layer is dependent on roughness and wettability of textile surface. The rougher and more hydrophilic is the material, the more ZnO were deposited. All studied textiles show significant bactericidal activity against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). A possible mechanism and difference in sensitivity between Gram-negative and Gram-positive bacteria to ZnO is discussed. Considering that antibacterial activity of ZnO is caused by Reactive Oxygen Species (ROS) generation, an influence of surface to volume ratio and crystalline parameters is also discussed.

1 September 2015 in Polymer
Verified
Journal Article
Closed access
IKIwona Karbownik
Iwona Karbownik
Marta Fiedot-TobołaMarta Fiedot-Toboła
Marta Fiedot-Toboła
OROlga Rac-Rumijowska
Olga Rac-Rumijowska
PSPatrycja Suchorska-Woźniak
Patrycja Suchorska-Woźniak
TRTomasz Rybicki
Tomasz Rybicki
HTHelena Teterycz
Helena Teterycz

28 March 2017 in Materials
Verified
Journal Article
Open access
PDF file
Marta Fiedot-TobołaMarta Fiedot-Toboła
Marta Fiedot-Toboła
Irena MaliszewskaIrena Maliszewska
Irena Maliszewska
OROlga Rac-Rumijowska
Olga Rac-Rumijowska
PSPatrycja Suchorska-Woźniak
Patrycja Suchorska-Woźniak
ALAgnieszka Lewińska
Agnieszka Lewińska
HTHelena Teterycz
Helena Teterycz
Surgical meshes were modified with zinc oxide (ZnO) using a chemical bath deposition method (CBD) at 50 °C, 70 °C, or 90 °C, in order to biologically activate them. Scanning electron microscopy (SEM), mass changes, and X-ray diffraction measurements revealed that at low temperatures Zn(OH)2 was formed, and that this was converted into ZnO with a temperature increase. The antimicrobial activity without light stimulation of the ZnO modified Mersilene™ meshes was related to the species of microorganism, the incubation time, and the conditions of the experiment. Generally, cocci (S. aureus, S. epidermidis) and yeast (C. albicans) were more sensitive than Gram-negative rods (E. coli). The differences in sensitivity of the studied microorganisms to ZnO were discussed. The most active sample was that obtained at 90 °C. The mechanism of antimicrobial action of ZnO was determined by various techniques, such as zeta potential analysis, electron paramagnetic resonance (EPR) spectroscopy, SEM studies, and measurements of Zn(II) and reactive oxygen species (ROS) concentration. Our results confirmed that the generation of free radicals was crucial, which occurs on the surface of crystalline ZnO.

20 November 2014 in Beilstein Journal of Nanotechnology
Verified
Journal Article
Open access
PDF file
OROlga Rac-Rumijowska
Olga Rac-Rumijowska
PSPatrycja Suchorska-Woźniak
Patrycja Suchorska-Woźniak
Marta Fiedot-TobołaMarta Fiedot-Toboła
Marta Fiedot-Toboła
HTHelena Teterycz
Helena Teterycz
According to recent research, the use of nanoparticles as a gas-sensitive material increases the selectivity and sensitivity and shortens the response time of a sensor. However, the synthesis of SnO2 nanoparticles presents many difficulties. The following article presents a simple and inexpensive method for the synthesis of SnO2 nanoparticles. The influence of the surfactant and polymer choice on the size of the resulting nanoparticles was investigated and a mechanism describing their interaction was proposed. It was found that stable colloids of SnO2 nanoparticles are formed in the presence of both PEI and Triton X-100 surfactants as stabilising agents. However, an additional factor essential for good stabilisation of the nanoparticles was an appropriate acidity level of the solution. Under optimal conditions, nanoparticles having an average diameter of about 10 nm are reproducibly formed.

25 March 2019 in Polymers
Verified
Journal Article
Open access
OROlga Rac-Rumijowska
Olga Rac-Rumijowska
Irena MaliszewskaIrena Maliszewska
Irena Maliszewska
Marta Fiedot-TobołaMarta Fiedot-Toboła
Marta Fiedot-Toboła
IKIwona Karbownik
Iwona Karbownik
HTHelena Teterycz
Helena Teterycz
This paper presents a method for the preparation of nanocomposite cellulose fibers doped with silver nanoparticles (AgNPs), as well as the effect of silver nanoparticles on the structure and properties of fibers. The fibers were obtained by an environmentally friendly method using N-Methylmorpholine N-oxide (NMMO) as a solvent, in a non-polluting closed system. Doping with silver nanoparticles was carried out as a direct (in situ) reduction of Ag+ ions in the presence of a stabilizing agent during the preparation of the spinning solution. SEM images of the surface and cross section of the fibers showed that the distribution of nanoparticles in the fibers’ volume was uniform. The fibers exhibited very good antibacterial properties in relation to Staphylococcus aureus, Escherichia coli, Acinetobacter baumannii, and Candida albicans. Flammability analysis showed that the fibers were subjected to a one-stage combustion process and that the silver nanoparticles reduced the heat release rate (HRR) of the fibers by 36%. TG studies showed that the modification of cellulose fibers with silver nanoparticles promoted the formation of mill scale in the combustion of fibers, which was directly related to the reduction of flammability. Tests of the electrical properties showed that the linear resistance of cellulose fibers containing 3 wt % silver was 108 Ω/cm.