Magneto-elasto-electric (ME) coupling heterostructures, consisting of piezoelectric layers bonded to magnetostrictive ones, provide for a new class of electromagnetic emitter materials on which a portable (area ~ 16 cm2) very low frequency (VLF) transmitter technology could be developed. The proposed ME transmitter functions as follows: (a) a piezoelectric layer is first driven by alternating current AC electric voltage at its electromechanical resonance (EMR) frequency, (b) subsequently, this EMR excites the magnetostrictive layers, giving rise to magnetization change, (c) in turn, the magnetization oscillations result in oscillating magnetic fields. By Maxwell’s equations, a corresponding electric field, is also generated, leading to electromagnetic field propagation. Our hybrid piezoelectric-magnetostrictive transformer can take an input electric voltage that may include modulation-signal over a carrier frequency and transmit via oscillating magnetic field or flux change. The prototype measurements reveal a magnetic dipole like near field, demonstrating its transmission capabilities. Furthermore, the developed prototype showed a 104 times higher efficiency over a small-circular loop of the same area, exhibiting its superiority over the class of traditional small antennas.
5 February 2020 in IEEE Transactions on Industrial Electronics
Tunability in magnetoelectric (ME) gyrators is of importance for realizing controllable energy efficient electronics. Here, we investigated a novel passive control method that exhibits a large frequency tunability of up to 370 Hz using a non-power consuming (passive) capacitor approach. The method requires zero external controllable power as the frequency is changed. This tuning does not decrease the power conversion efficiency (86%) of the gyrator. Our results indicate that the internal mechanical reactive components need to be changed by passive external capacitors, which proves to be an effective way by which gyrators can achieve high tunability and retain high power conversion efficiency. This study opens an approach towards the design of new tunable circuit components.
Magnetoelectric (ME) composites with ferromagnetic and ferroelectric phases show a strong coupling between the magnetic and electric subsystems that occurs through mechanical strain. Such composites are suitable for applications such as transducers that convert magnetic and electric energies. An important issue that needs to be considered is the magnetic-to-electric energy conversion efficiency. For applications under high power, energy transduction requires a high mechanical stability that minimizes the loss during conversion. Here, the high drive mechanical stability of Mn-doped Pb(Mg1/3Nb2/3)O3-PbTiO3 (PMN-PT) crystals has been enhanced by external magnetic field when bonded to Fe-rich Metglas foils. External field modulation stabilizes the mechanical quality factor under high power drive. A magnetoelectric gyrator was then made that had an excellent power conversion efficiency of η=92%, but which also had a dramatically decreased size as compared to similar gyrators made of “hard” Pb(Zr,Ti)O3 (PZT) ceramics. The findings provided an approach to optimizing the size-weight-power space of ME gyrators for power converters.
A magnetoelectric (ME) gradiometer consisting of two Metglas/Pb(Zr,Ti)O3 fiber-based sensors has been developed. The equivalent magnetic noise of both sensors was first determined to be about 60 pT/√Hz while using an H-field modulation technique. The common mode rejection ratio of a gradiometer based on these two sensors was determined to be 74. The gradiometer response curve was then measured, which provided the dependence of the gradiometer output as a function of the source-gradiometer-normalized distance. Investigations in the presence of vibration noise revealed that a ME gradiometer consisting of two ME magnetometers working under H-field modulation was capable of significant vibration rejection. The results were compared to similar studies of ME gradiometers operated in a passive working mode. Our findings demonstrate that this active gradiometer has a good vibration rejection capability in the presence of both magnetic signals and vibration noise/interferences by using two magnetoelectric sensors operated under H-field modulation.
25 June 2020 in Journal of Physics D: Applied Physics
A magnetoelectric gradiometer consisting of several Metglas/Pb(Zr,Ti)O 3 sensors with 2D and 3D configurations has been developed. The angular relationship between the ME gradiometer and the magnetic source in different configurations is presented, whose patterns clearly illustrate the magnetic source detection capabilities of our ME gradiometer. At each specific angle, there were unique outputs from the ME sensors, from which we could determine the 2D planar position of the magnetic source. The ME matrix for a 3D magnetic field gradient measurement was also determined. A measurement consisting of eight corner points of a 60 cm 60 cm 60 cm cube was performed, where the magnetic source was located in the center of the cube. The experimental data yielded 3D vector outputs representing the distribution of the magnetic flux lines. The results demonstrate that a ME gradiometer has the potential for detection and localization of an unknown spatial magnetic source.