Jute fiber-reinforced composites have become a promising alternative to synthetic fiber composites because of their favorable environmental characteristics, cost efficiency, and good mechanical properties. The present review provides a comprehensive examination of the manufacturing processes and mechanical properties of polymer composites reinforced with jute fibers. This study investigates the influence of several fabrication methods, such as hand lay-up, compression molding, injection molding, pultrusion, etc., on the mechanical properties of the composites. It also provides SWOT analyses of various manufacturing processes of jute fiber-reinforced composites. Important aspects, including fiber orientation, fiber/matrix adhesion, and the effects of different surface treatments on improving mechanical characteristics, such as tensile strength, flexural strength, and impact resistance, are discussed. The difficulties associated with moisture absorption, degradation, and the lack of uniformity in jute fibers, as well as approaches to alleviate these problems, are presented. The goal of this study is to establish a basis for future investigation and advancement in enhancing the mechanical properties of jute fiber-reinforced composites.

In this paper, mechanical properties of bamboo strip and bamboo strip-glass fiber reinforced hybrid composite were investigated. Composites were manufactured by using hand lay-up technique and bamboo strips were made from locally available bamboo. Four layers of bamboo strip composite were manufactured and in case of hybrid composite, two layers of glass fiber one at the top and the other at the bottom were used with the aim was to observe the effect of adding glass fiber layer on the mechanical properties of bamboo strip composite. Tensile and flexural properties were studied and it was found that adding the glass fiber layer doesn’t have any significant effect on tensile properties but flexural strength and modulus have increased by 22.49 % and 15.02 % respectively.