Cristina Ponti

Dr. Cristina Ponti

Department of Engineering, “Roma Tre” University, 00154 Roma, Italy
orcid

Research Focus & Metrics

Academic Career Length

16Years (2011-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 January 2014 in International Journal of Antennas and Propagation
Verified
Journal Article
Open access
PDF file
Fabrizio FrezzaFabrizio Frezza
Fabrizio Frezza
LPLara Pajewski
Lara Pajewski
Emanuele PiuzziEmanuele Piuzzi
Emanuele Piuzzi
CPCristina Ponti
Cristina Ponti
GSGiuseppe Schettini
Giuseppe Schettini
A woodpile Electromagnetic Bandgap (EBG) material has been designed, by using an in-house code that implements the Fourier Modal Method (FMM). A couple of alumina-woodpile samples have been fabricated. Several results have been collected for the transmission behaviour of the woodpile and of resonators with woodpile mirrors, in a shielded anechoic chamber, by using a vector network analyzer, in the 8–12 GHz range. These new experimental data highlight interesting properties of 3D EBG resonators and suggest possible innovative applications. Comparisons of the collected results with FMM show a satisfactory agreement. An application of the EBG resonator has been considered, for gain enhancement of a microstrip antenna: an increase of about 10 dB in the broadside gain has been measured; experimental data and numerical results obtained with the commercial software HFSS show a good agreement. A comparison is presented between EBG resonator antennas and two-dimensional uniform arrays. Finally, HFSS results are provided for EBG resonator antennas working at higher frequencies or with a more selective superstrate: a gain enhancement of more than 18 dB is achieved by such antennas.

18 May 2020 in Sensors
Verified
Journal Article
Open access
PDF file
Alessandro FedeliAlessandro Fedeli
Alessandro Fedeli
MPMatteo Pastorino
Matteo Pastorino
CPCristina Ponti
Cristina Ponti
Andrea RandazzoAndrea Randazzo
Andrea Randazzo
GSGiuseppe Schettini
Giuseppe Schettini
The imaging of dielectric targets hidden behind a wall is addressed in this paper. An analytical solver for a fast and accurate computation of the forward scattered field by the targets is proposed, which takes into account all the interactions of the electromagnetic field with the interfaces of the wall. Furthermore, an inversion procedure able to address the full underlying non-linear inverse scattering problem is introduced. This technique exploits a regularizing scheme in Lebesgue spaces in order to reconstruct an image of the hidden targets. Preliminary numerical results are provided in order to initially assess the capabilities of the developed solvers.

23 July 2013 in Journal of the Optical Society of America A
Verified
Journal Article
Closed access
PDF file
Fabrizio FrezzaFabrizio Frezza
Fabrizio Frezza
LPLara Pajewski
Lara Pajewski
CPCristina Ponti
Cristina Ponti
GSGiuseppe Schettini
Giuseppe Schettini
A spectral-domain analysis is presented for the scattering by perfectly conducting cylindrical objects behind a dielectric wall. The solution is developed with an analytical-numerical technique, based on the cylindrical wave approach. Suitable cylindrical functions and their spectral representations are introduced as basis functions for the scattered fields, to deal with their interaction with the planar interfaces bounding the wall. The numerical solution is given in TE and TM polarizations states, and in both near- and far-field zones. The model yields an accurate computation of direct scattering that can be useful for through-wall-imaging applications. A stack of three different dielectric media is considered in the theoretical model. In the numerical results, the upper medium, where the incident field is generated, is assumed to be filled by air, the central layer represents the wall, and the lower medium, which contains the scatterers, is air filled, too. Also general problems of scattering by buried objects can be simulated, being the cylinders buried in a medium of arbitrary permittivity, placed below a dielectric layer.

4 December 2013 in Journal of the Optical Society of America A
Verified
Journal Article
Closed access
PDF file
MFMuhammad Arshad Fiaz
Muhammad Arshad Fiaz
Fabrizio FrezzaFabrizio Frezza
Fabrizio Frezza
CPCristina Ponti
Cristina Ponti
GSGiuseppe Schettini
Giuseppe Schettini
A two-dimensional beam is scattered by a cylinder buried below a slightly rough surface. The cylindrical wave approach is applied, i.e., cylindrical waves are employed as basis functions of the fields scattered by the cylinder. Moreover, a spectral representation of both the incident field and the cylindrical waves is used. Rough surface deviation is coped with by the first-order small perturbation method. Therefore, to a zeroth-order solution relevant to scattering in the case of a flat surface, a first-order approximation is superimposed. The theoretical approach has been implemented for a periodic surface with Gaussian roughness spectrum.

4 February 2021 in IEEE Transactions on Geoscience and Remote Sensing
Verified
Journal Article
Closed access
Andrea RandazzoAndrea Randazzo
Andrea Randazzo
CPCristina Ponti
Cristina Ponti
Alessandro FedeliAlessandro Fedeli
Alessandro Fedeli
CEClaudio Estatico
Claudio Estatico
PDPaolo D'ATanasio
Paolo D'ATanasio
GSGiuseppe Schettini
Giuseppe Schettini
A novel two-step inverse-scattering technique is proposed for through-the-wall microwave imaging. The approach is based on a regularization scheme developed in the framework of variable-exponent Lebesgue spaces, which enhances the quality of the reconstruction by properly tuning the exponent function that defines the adopted norm. Such a function is built directly from the available data by using a beamforming technique based on a delay-and-sum scheme. After an initial numerical assessment, the approach is validated against experimental measurements in a laboratory environment, with targets placed behind a brick wall. Measured data are collected in time domain by scanning the transmitting and receiving antennas in a multi-illumination and multi-view arrangement. The processing of experimental data is performed in the frequency domain, where data at multiple frequencies are extracted by a Fast Fourier Transform (FFT) and simultaneously processed by the imaging algorithm. The obtained imaging results confirm the good reconstruction capabilities of the developed inverse-scattering scheme in the case of both metallic and low-contrast targets.

24 April 2017 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
CPCristina Ponti
Cristina Ponti
MSMassimo Santarsiero
Massimo Santarsiero
GSGiuseppe Schettini
Giuseppe Schettini
The pulsed scattering by buried perfectly conducting cylinders is solved with the cylindrical wave approach. The source of the scattering problem is a wideband excitation from a plane-wave source field. A spectral approach is employed, expressing the electric field as a superposition of monochromatic contribution. Time-domain response is found through the inverse Fourier transform on the spectra relevant to each field contributions. Numerical implementation of the method turns out to be very accurate. The technique has important applications in the simulation of the scenarios of embedded objects within remote sensing techniques. Results are plotted to simulate both A-scan and B-scan plots typical of ground penetrating radar measurements. The method has been validated through a comparison with a numerical technique available in the literature.