A simple formulation to compute the envelope correlation of an antenna diversity system is derived. It is shown how to compute the envelope correlation from the S-parameter description of the antenna system. This approach has the advantage that it does not require the computation nor the measurement of the radiation pattern of the antenna system. It also offers the advantage of providing a clear understanding of the effects of mutual coupling and input match on the diversity performance of the antenna system.

A downscaling approach to improve the spatial resolution of Soil Moisture and Ocean Salinity (SMOS) soil moisture estimates with the use of higher resolution visible/infrared (VIS/IR) satellite data is presented. The algorithm is based on the so-called “universal triangle” concept that relates VIS/IR parameters, such as the Normalized Difference Vegetation Index (NDVI), and Land Surface Temperature (T_s), to the soil moisture status. It combines the accuracy of SMOS observations with the high spatial resolution of VIS/IR satellite data into accurate soil moisture estimates at high spatial resolution. In preparation for the SMOS launch, the algorithm was tested using observations of the UPC Airborne RadIomEter at L-band (ARIEL) over the Soil Moisture Measurement Network of the University of Salamanca (REMEDHUS) in Zamora (Spain), and LANDSAT imagery. Results showed fairly good agreement with ground-based soil moisture measurements and illustrated the strength of the link between VIS/IR satellite data and soil moisture status. Following the SMOS launch, a downscaling strategy for the estimation of soil moisture at high resolution from SMOS using MODIS VIS/IR data has been developed. The method has been applied to some of the first SMOS images acquired during the commissioning phase and is validated against in situ soil moisture data from the OZnet soil moisture monitoring network, in South-Eastern Australia. Results show that the soil moisture variability is effectively captured at 10 and 1 km spatial scales without a significant degradation of the root mean square error.

This paper is concerned with the radiometric sensitivity computation of an aperture synthesis interferometric radiometer devoted to Earth observation. The impact of system parameters and the use of simultaneous redundant measurements are analyzed. The interferometric radiometer uncertainty principle is presented; it quantifies the relationship between radiometric sensitivity and angular resolution.Peer ReviewedPostprint (published version

End-to-end calibration of the Microwave Imaging Radiometer by Aperture Synthesis (MIRAS) radiometer refers to processing the measured raw data up to dual-polarization brightness temperature maps over the earth's surface, which is the level 1 product of the Soil Moisture and Ocean Salinity (SMOS) mission. The process starts with a self-correction of comparators offset and quadrature error and is followed by the calibration procedure itself. This one is based on periodically injecting correlated and uncorrelated noise to all receivers in order to measure their relevant parameters, which are then used to correct the raw data. This can deal with most of the errors associated with the receivers but does not correct for antenna errors, which must be included in the image reconstruction algorithm. Relative S-parameters of the noise injection network and of the input switch are needed as additional data, whereas the whole process is independent of the exact value of the noise source power and of the distribution network physical temperature. On the other hand, the approach relies on having at least one very well-calibrated reference receiver, which is implemented as a noise injection radiometer. The result is the calibrated visibility function, which is inverted by the image reconstruction algorithm to get the brightness temperature as a function of the director cosines at the antenna reference plane. The final step is a coordinate rotation to obtain the horizontal and vertical brightness temperature maps over the earth. The procedures presented are validated using a complete SMOS simulator previously developed by the authors.

After the successful launching of the Soil Moisture and Ocean Salinity satellite in November 2009, continuous streams of data started to be regularly downloaded and made available to be processed. The first six months of operation were fully dedicated to the In-Orbit Commissioning Phase, with an intense activity aimed at bringing the satellite and instrument into a fully operational condition. Concerning the payload Microwave Imaging Radiometer with Aperture Synthesis, it was fully characterized using specific orbits dedicated to check all instrument modes. The procedures, already defined during the on-ground characterization, were repeated so as to obtain realistic temperature characterization and updated internal calibration parameters. External calibration maneuvers were tested for the first time and provided absolute instrument calibration, as well as corrections to internal calibration data. Overall, performance parameters, such as stability, radiometric sensitivity and radiometric accuracy were evaluated. The main results of this activity are presented in this paper, showing that the instrument delivers stable and well-calibrated data thanks to the combination of external and internal calibration and to an accurate thermal characterization. Finally, the quality of the visibility calibration is demonstrated by producing brightness temperature images in the alias-free field of view using standard inversion techniques. Images of ocean, ice, and land are given as examples.