Yuan Zhuang

Mr. Yuan Zhuang

orcid

Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
15 November 2019 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
YZYuan Zhuang
Yuan Zhuang
CXChen Xu
Chen Xu
CSChaoyun Song
Chaoyun Song
ACAnqi Chen
Anqi Chen
WLWei Lee
Wei Lee
Jiafeng ZhouJiafeng Zhou
Jiafeng Zhou

8 October 2019 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
YZYuan Zhuang
Yuan Zhuang
ACAnqi Chen
Anqi Chen
CXChen Xu
Chen Xu
YHYi Huang
Yi Huang
HZHuapeng Zhao
Huapeng Zhao
Jiafeng ZhouJiafeng Zhou
Jiafeng Zhou
Wireless power transfer systems using coupled magnetic resonances are susceptible to the transfer distance variation between the transmitter (Tx) and receiver (Rx) since the coupling between Tx and Rx is highly position dependent. Once the transfer distance deviates from the optimum one, the coupling will be either excessive or weak, which results in power transfer efficiency (PTE) degradation. This article presents a Tx structure consisting of multiple subcoils oriented in opposite directions to keep the coupling relatively constant over an extensive range of transfer distances. The proposed design can achieve a PTE of 88-70% with a transfer distance varying from 0 to 70 mm and a PTE of 85-60% with a misalignment of 0-80 mm at a 40 mm transfer distance. The radius of the Tx and Rx is 84.6 and 45.1 mm, respectively. The measured PTE of the proposed design is better than 70% with a 0-50 mm transfer distance while the misalignment changing from 0 to 50 mm. The proposed system is much less sensitive to the transfer distance variation than the convention system and has a great potential for wireless charging applications.

13 June 2018 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
CSChaoyun Song
Chaoyun Song
ALAna Lopez-Yela
Ana Lopez-Yela
Yi HuangYi Huang
Yi Huang
DSDaniel Segovia-Vargas
Daniel Segovia-Vargas
YZYuan Zhuang
Yuan Zhuang
Jiafeng ZhouJiafeng Zhou
Jiafeng Zhou
There has been an increasing demand for smart devices and smart furniture for home automation, monitoring and security applications. In this paper, we present a novel method of integrating the function of wireless energy harvesting from ambient RF signals to a conventional quartz clock for home applications. The most attractive feature is that the clock itself is used as the power receiving device, thus no additional antennas are needed. A simple rectifier is designed to directly match with the clock antenna and rectify the power captured by the clock. As a design example, a clock rectenna using the proposed new idea achieves good energy conversion efficiency (up to 65%) over its operating frequency bands at around 1.4 - 1.5, 1.9 - 2.1 and 2.4 - 2.8 GHz respectively. Moreover, a wireless environmental sensor is integrated with the clock and powered by using the harvested power from the proposed clock rectenna. This novel design greatly expands the functionality of the quartz clock without affecting its size and appearance. We believe that the proposed energy harvesting quartz clock could be adopted for smart home applications.

20 January 2021 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
CXChen Xu
Chen Xu
YZYuan Zhuang
Yuan Zhuang
CSChaoyun Song
Chaoyun Song
Yi HuangYi Huang
Yi Huang
Jiafeng ZhouJiafeng Zhou
Jiafeng Zhou
Extensible magnetic resonance coupling-based wireless power transfer (WPT) systems are presented in this article. A transmitter (Tx) containing an 8-shape loop and two resonators is proposed to construct a bipolar Tx array. A unipolar receiver (Rx) is placed above the Tx perpendicularly to overcome the power null phenomenon. The proposed structure ensures that magnetic flux lines are confined in the vicinity of the Rx, leading to a high power transfer efficiency (PTE) over a wide range of lateral misalignment distances. Experiments demonstrated that the proposed WPT system can achieve an efficiency of 87% under perfectly aligned operating conditions, and maintain over 70% efficiency from 0 to 30 mm lateral misalignment distances. Based on the proposed Tx module, a single-feed Tx array is constructed to further increase the charging area. The PTE of a 1 x 2 array system is between 57.5% and 71.6% without the power null phenomenon. Meanwhile, the concern of heating due to magnetic field leakage can be significantly mitigated. These designs are proved to be very good candidates for dynamic WPT (DWPT) applications.

6 February 2018 in IEEE Transactions on Circuits and Systems II: Express Briefs
Verified
Journal Article
Closed access
ACAnqi Chen
Anqi Chen
YZYuan Zhuang
Yuan Zhuang
Jiafeng ZhouJiafeng Zhou
Jiafeng Zhou
YHYi Huang
Yi Huang
LXLei Xing
Lei Xing
In this brief, a novel two-way power divider with a wide range tunable bandwidth is presented and investigated. The proposed power divider is designed based on adding a pair of capacitors in parallel with the transmission lines in a Trantanella-type of Wilkinson power divider. The proposed power divider provides an additional zero-reflection frequency which will significantly increase the bandwidth compared with a conventional Wilkinson power divider. Moreover, the added zeroreflection frequency is sensitive to the capacitors so that the bandwidth can be tuned by altering the capacitance of the capacitors. Analytic design methods and formulas are derived and presented in detail. A two-way power divider is designed and measured to validate the proposed method. The measurement indicates that the device has a 15-dB bandwidth of FH/FL=2.73:1 (0.75 GHz to 2.05 GHz). The proposed method can be applied for multi-way multi-section power dividers. Meanwhile, an eight-way power divider is designed and fabricated. The measured response has a bandwidth of FH/FL=2.67:1 (0.75 GHz to 2 GHz) with all the S-parameters better than -13 dB. The proposed power dividers have a wide bandwidth, compact size, good physical and electrical isolation feature. The measurement agrees well with the theoretical prediction which validates the proposed design theory.

26 September 2017 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
YZYuan Zhuang
Yuan Zhuang
ZFZhouxiang Fei
Zhouxiang Fei
ACAnqi Chen
Anqi Chen
YHYi Huang
Yi Huang
KRKhondker Rabbi
Khondker Rabbi
Jiafeng ZhouJiafeng Zhou
Jiafeng Zhou
This paper presents a novel general design method of frequency varying impedance matching. The method is applied to design of a broadband high-efficiency power amplifier (PA). The proposed method defines the optimal impedance regions of a PA at several frequency sections over the operational frequency band. These regions contain the impedances that can achieve a high output power and a high-power added efficiency (PAE) simultaneously. A low-pass LC-ladder circuit is selected as the matching network (MN). The element values of the MN can be obtained using a synthesizing method based on stochastic reduced order models and Voronoi partition. The MN provides desired impedance in the predefined optimal impedance region at each frequency section. Thus, optimal output power and PAE of the PA can be achieved. To validate the proposed method, two eighth-order low-pass LC-ladder networks are designed as the input and output MNs, respectively. A gallium nitride (GaN) HEMT from Cree is employed as the active device. Packaging parasitic of the transistor has been taken into account. A PA is designed, fabricated, and measured. The measurement results show that the PA can achieve P1 dB PAE of better than 60% over a fractional bandwidth of 160% (0.2-1.8 GHz). The output power is 42-45 dBm (16-32 W), and the gain is 12-15 dB. The performance of the PA outperforms existing broadband highefficiency PAs in many aspects, which demonstrates the excellence of the proposed method.