In this article, a novel ultrahigh precision mass balancing method for fused quartz hemispherical resonator based on the ion beam etching process is proposed from the perspective of vibration mechanics. First, the motion equations of resonator with mass defect are established to reveal the quantitative relationship between the amplitude of defective mass and frequency split, and the geometrical relationship between the distribution of defective mass and eigenfrequency axis, which is the equivalent morphology of mass defect. Second, according to the motion equations, the radial vibration model of resonator lip edge is deduced, then a new identification model for the vibration parameters composed of the frequency split, mechanical time constant, and azimuth of eigenfrequency axis based on the vibration envelope and spectral analysis is established. The vibration parameters are identified by nonlinear optimization method. After that, the mass removal function and etching efficiency function of ion beam acting on the resonator are calibrated by experimental data, then the etching trajectory is planned and the etching time is calculated. Finally, the experimental result of mass balancing indicates that the frequency split is reduced from 0.2354 to 0.0006 Hz, and the quality factor is greater than 2.2 × 10 7 , which can significantly improve the vibration performance of resonator.
The Hemispherical Resonator Gyro (HRG) is a solid-state and widely used vibrating gyroscope, especially in the field of deep space exploration. The flat-electrode HRG is a new promising type of gyroscope with simpler structure that is easier to be fabricated. In this paper, to cover the shortage of a classical generalized Coriolis Vibration Gyroscope model whose parameters are hard to obtain, the model of flat-electrode HRG is established by the equivalent mechanical model, the motion equations of unideal hemispherical shell resonator are deduced, and the calculation results of parameters in the equations are verified to be reliable and believable by comparing with finite element simulation and the reported experimental data. In order to more truthfully reveal the input and output characteristics of HRG, the excitation and detection models with assemble errors and parameters are established based on the model of flat-electrode capacitor, and they convert both the input and output forms of the HRG model to voltage changes across the electrodes rather than changes in force and capacitance. An identification method of assemble errors and parameters is proposed to evaluate and improve the HRG manufacturing technology and adjust the performance of HRG. The average gap could be identified with the average capacitance of all excitation and detection capacitors; fitting the approximate static capacitor model could identify the inclination angle and direction angle. With the obtained model, a firm and tight connection between the real HRG system and theoretical model is established, which makes it possible to build a fully functional simulation model to study the control and detection methods of standing wave on hemispherical shell resonator.
14 July 2023 in IEEE Transactions on Instrumentation and Measurement
Assembly and welding of the hemispherical resonator and flat electrode are the core process links in gyro manufacturing, which will affect the electrode excitation, detect gain consistency of the hemispherical resonator gyro and the vibration performance parameters of the resonator, thus ultimately affecting the output accuracy of the gyro. To achieve a high-precision assembly and welding, firstly, this paper establishes the assembly error model of the hemispherical resonator and flat electrode, analyzes the effect of assembly error on static capacitance, and proposes an assembly spacing measurement scheme based on static capacitors. Then, the integrated experimental platform of high-precision assembly and welding is designed and implemented, equipped with a high-precision capacitance detection circuit, and the capacitance detection circuit is calibrated using actuators. Finally, the experimental results show that the average assembly clearance between the hemispherical resonator and the flat electrode reaches 33μm, the peak-to-peak value is less than 3 μm, and the non-uniformity of the assembly gap is less than 9.4%. In addition, to analyze the influence on the vibration parameters of the resonator after assembly and welding, a test platform for measuring the vibration performance parameters of the resonator is built. The experimental results show that the mean reduction of the quality factor of the resonator in the range of 600w~1000w after assembly and welding is less than 8.6%, which verifies the correctness of the theoretical model and the superiority of the assembly and welding scheme.
Due to complicated processing technology, the mass distribution of a hemispherical resonator made of fused silica is not uniform, which can affect the azimuth of the standing wave of a resonator under the linear vibration excitation. Therefore, the analysis of standing wave evolution of a resonator with mass imperfection under linear vibration excitation is of significance for the improvement of the output accuracy of a gyroscope. In this paper, it is assumed that the resonator containing the first–third harmonics of mass imperfection is excited by horizontal and vertical linear vibration, respectively; then, the equations of motion of an imperfect resonator under the second-order vibration mode are established by the elastic thin shell theory and Lagrange mechanics principle. Through error mechanism analysis, it is found that, when the frequency of linear vibration is equal to the natural frequency of resonator, the standing wave is bound in the azimuth of different harmonics of mass imperfection with the change in vibration excitation direction. In other words, there are parasitic components in the azimuth of the standing wave of a resonator under linear vibration excitation, which can cause distortion of the output signal of a gyroscope. On the other hand, according to the standing wave binding phenomenon, the azimuths of the first–third harmonics of mass imperfection of a resonator can also be identified under linear vibration excitation, which can provide a theoretical method for the mass balance of an imperfect resonator.
28 December 2024 in International Journal of Mechanical Sciences