This article develops an improved seismic risk assessment formulation exhibiting both random and bounded uncertainties using a probability and parallelepiped convex set mixed model. Limit thresholds for different types of components are described via a probabilistic model. The distribution parameters of limit thresholds are originally treated by employing a multidimensional parallelepiped convex model, in which marginal intervals are utilised to represent scattering levels for the distribution parameters, while relevant angle are employed to express the correlation between uncertain distribution parameters. The structural responses, i.e., engineering demand parameters (EDPs), are considered as correlated random variables and are assumed to follow a multidimensional lognormal distribution. A performance limit state function, which allows considering the relationship between the EDPs and the corresponding limit thresholds, is employed to reflect the coexistence of both random and parallelepiped convex variables. The limit state function is mapped into the standard parameter space via a transformation technique. Then, the improved seismic risk formulation, characterised through a probability and parallelepiped convex mixed variables, can be derived with the combination of the seismic fragility function and the ground motion hazard curve. The main purpose is to illustrate that the performance limit states should be properly modeled as random and parallelepiped convex mixed variables rather than only random or deterministic quantities. A six-story reinforced concrete building designed according to Chinese codes are used to illustrate the proposed approach for constructing hazard curves. The interstory drift and the peak floor acceleration are the selected EDPs, calculated through incremental dynamic analysis. The results demonstrate that the calculated failure probabilities for different limit states in 50 years are found capable of meeting the requirements of Chinese seismic norms after the proposed seismic risk formulation is adopted.
22 April 2019 in Journal of Low Frequency Noise, Vibration and Active Control
A linear optimal regulator for uncertain system is designed through the application of the probability density evolution method to linear quadratic regulator controller. One important background of this work is bridge-vehicle/gun-projectile system. This type of optimal problem is currently transformed into a moving load problem. The developed optimal regulator can provide the law of probability densities of outputs varying with time. In order to make the advocated method reach an optimal performance, the beneficial weighting matrix pair (Q, R) is selected using a trade-off sense. The designed regulator is then applied to a coupled simply supported beam-moving mass system, choosing the mid-span deflection as an output response and considering stochastic system parameters. The numerical example shows that the robustness of the proposed optimal regulator cannot be overestimated in comparison with a deterministic linear quadratic regulator controller. Further, the proposed method can produce an efficient solution channel for modern optimal control theory, especially, when compared with different uncertain optimal control techniques.
Due to the recent saturation of the traditional telecom markets, the vendors are shifting their focus on to the vertical markets, including but not limited to oil and mine industries. This paper is offering a solution for one of the key issues the mine industry is facing. When the accident happen under the mine, the first thing to do is to locate the workers, there are many methods been proposed; however, each has pros and cons. For example, we can use RFID to locate the people, the problem is when there are too many miners at the same spot, the method doesn’t work well; we can use CDMA indoor GPS system to locate the person, however, the base station is not cheap; we can use IEEE802.15 Zigbee system to locate people, but we need huge amount of nodes to cover reasonable size of mine; for these reasons, we propose to use low cost WiFi system to fulfill the task. We introduce IEEE1588 Precision Timing Protocol into the existing WiFi or similar mesh networks, to increase the Time of Arrival ranging accuracy. This way, with limited increasing of the system cost, we satisfy the customer requirements. To prove the concept, Matlab is used to work out the theoretical bit-flow vacation model and the simple linear-ranging algorithms
20 August 2021 in International Journal of Mechanics and Materials in Design
Assessing the demand hazards of structures is requested in the framework of performance‐based earthquake engineering. An efficient method for estimating the seismic risk of structures is proposed in this paper. The relationship between multiple limit capacities and corresponding response parameters is denoted by using a generalized multidimensional limit state equation. The limit states of different components are described as random and convex mixed variables. The seismic responses of different components are considered dependent and follow a multidimensional lognormal distribution. The mathematical formula of multidimensional demand hazards of structures is then derived through combining the seismic fragility function and the seismic hazard curve. The proposed method is used to perform the demand hazard analysis and the parameter sensitivity analysis of a multispan continuous concrete girder bridge, selecting column ductility and bearing displacement as the two‐dimensional seismic response parameters obtained by Incremental Dynamic Analysis. The results demonstrate that the coefficient of variation and correlation coefficient N, which are involved in the limit state equation, have an impact on the evaluation of the demand hazards.