This review includes the most relevant aspects of the microplastics' presence in the atmosphere, with a complete analysis of possible sources, transport mechanisms, and the health risks associated with these emerging and bio-persistent pollutants.

The use of dyes at an industrial level has become problematic, since the discharge of dye effluents into water disturbs the photosynthetic activity of numerous aquatic organisms by reducing the penetration of light and oxygen, in addition to causing carcinogenic diseases and mutagenic effects in humans, as well as alterations in different ecosystems. Chitosan (CS) is suitable for removing anionic dyes since it has favorable properties, such as acquiring a positive charge and a typical macromolecular structure of polysaccharides. In this study, the optimization of CS beads crosslinked with glutaraldehyde (GA) for the adsorption of reactive blue dye 4 (RB4) in an aqueous solution was carried out. In this sense, the response surface methodology (RSM) was applied to evaluate the concentration of CS, GA, and sodium hydroxide on the swelling degree in the GA-crosslinked CS beads. In the same way, RSM was applied to optimize the adsorption process of the RB4 dye as a function of the initial pH of the solution, initial concentration of the dye, and adsorbent dose. The crosslinking reaction was investigated by scanning electron microscopy (SEM), Fourier transformed infrared spectroscopy (FTIR), and X-ray diffractometry (XRD). The design described for the swelling degree showed an R² (coefficient of determination) adjusted of 0.8634 and optimized concentrations (CS 3.3% w/v, GA 1.7% v/v, and NaOH 1.3 M) that were conveniently applied with a concentration of CS at 3.0% w/v to decrease the viscosity and facilitate the formation of the beads. In the RB4 dye adsorption design, an adjusted R² (0.8280) with good correlation was observed, where the optimized conditions were: pH = 2, adsorbent dose 0.6 g, and initial concentration of RB4 dye 5 mg/L. The kinetic behavior and the adsorption isotherm allowed us to conclude that the GA-crosslinked CS beads’ adsorption mechanism was controlled mainly by chemisorption interactions, demonstrating its applicability in systems that require the removal of contaminants with similar structures to the model presented.

There are few studies on microplastic (MP) contamination in Colombia, and little is known about its impacts on continental aquatic ecosystems. This study evaluated, for the first time, the identification, abundance, and distribution of MP particles in the surface water of Luruaco Lake, in the low basin of the Magdalena River, Colombia, included in national programs in marine sciences and hydrobiological resources. Six stations and four samplings were established in the dry and rainy seasons. A total of 72 water samples were collected for microplastic extraction using hydrogen peroxide (H2O2) digestion, density separation with sodium chloride solution (NaCl), and filtration. The abundance of MPs ranged from 0 to 3.83 MPs·L−1, with an average of 1.90 MPs·L−1 in the rainy season and 0.25 MPs·L−1 in the dry season. According to the calculated coefficient of microplastics impact, the contamination in the surface water of Luruaco Lake is “maximum” to “extreme” for fibers with an average length of 2.05 mm and “minimum” to “average” for fragments that are 0.35 mm in size on average. Polyester (PES, 57.9%), polystyrene (PS, 47.0%), and polyethylene terephthalate (PET, 35.3%) polymers were more abundant in surface water. The temporal variation of the MPs indicates contamination related to the discharges of the tributary streams to the lake in the rainy season.

The sensorial properties of Colombian coffee are renowned worldwide, which is reflected in its market value. This raises the threat of fraud by adulteration using coffee grains from other countries, thus creating a demand for robust and cost-effective methods for the determination of geographical origin of coffee samples. Spectroscopic techniques such as Nuclear Magnetic Resonance (NMR), near infrared (NIR), and mid-infrared (mIR) have arisen as strong candidates for the task. Although a body of work exists that reports on their individual performances, a faithful comparison has not been established yet. We evaluated the performance of ¹H-NMR, Attenuated Total Reflectance mIR (ATR-mIR), and NIR applied to fraud detection in Colombian coffee. For each technique, we built classification models for discrimination by species (C. arabica versus C. canephora (or robusta)) and by origin (Colombia versus other C. arabica) using a common set of coffee samples. All techniques successfully discriminated samples by species, as expected. Regarding origin determination, ATR-mIR and ¹H-NMR showed comparable capacity to discriminate Colombian coffee samples, while NIR fell short by comparison. In conclusion, ATR-mIR, a less common technique in the field of coffee adulteration and fraud detection, emerges as a strong candidate, faster and with lower cost compared to ¹H-NMR and more discriminating compared to NIR.

Microplastics are distributed in the environment and are considered emerging pollutants because they are not regulated by legislation. This article aims to know the current state of knowledge regarding microplastic pollution in coastal areas of Colombia. Therefore, a detailed search was carried out in databases such as Scopus, Google Scholar, and university repositories collecting scientific and academic information published between 2000 and March 2022. As a result of the review, the presence of microplastics in coastal areas of Colombia was identified, particularly in the water, sediments, and fish, thus evidencing the contamination in coastal ecosystems, where the Caribbean coast is the area with the highest amount of microplastics in sediments, especially Cartagena (249-1387 particles/m²) and Santa Marta (144-791 particles/m²). It was also found that of 302 species of fish, 7% contained microplastics in the Ciénaga Grande of Santa Marta. In the studies, on the other hand, it was observed that there is no standardized methodology; each researcher chooses a different approach according to the scientific literature. The studies showed that the most abundant microplastics were secondary microplastics, of which polypropylene and polyethylene are predominant due to their different applications in society. This review will serve as a baseline for future research on microplastics in coastal areas of Colombia and will identify the challenges and realities of the country in the face of these emerging pollutants.