Michal Franek

Dr. Michal Franek


Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 January 2023 in Buildings
Verified
Journal Article
Open access
PDF file
OHOlga Hubova
Olga Hubova
MMMarek Macák
Marek Macák
MFMichal Franek
Michal Franek
PLPeter Lobotka
Peter Lobotka
LKLenka Bujdáková Konečná
Lenka Bujdáková Konečná
OIOľga Ivánková
Oľga Ivánková
This article deals with the investigation of wind effects on a façade of a rectangular residential building with explicit modelling of the windows for specific wind conditions. The external wind pressure coefficients were treated on the façade and at the places of the window sills, linings, and lintel for the direction of the wind from 0° to 90° with increments of 22.5°. For a detailed analysis, the CFD simulation using Ansys Fluent was used. The method selected for the CFD simulation solution and its setting (quality of meshing, horizontal homogeneity of the boundary layer, etc.) were verified by known results of similar objects. The purpose of this analysis is to show how important it is to consider wind effects to determine the suitable placement of passive ventilation devices. Research shows the potential optimal position of ventilation units in terms of favourable pressure distribution. Zones with negative pressure and corners or façades in a wake are not suitable for applying passive ventilation units. The results can serve as a basis for designers to achieve optimal comfort in residential buildings.

1 December 2021 in Civil and Environmental Engineering
Verified
Journal Article
Open access
PDF file
MFMichal Franek
Michal Franek
MMMarek Macák
Marek Macák
OHOľga Hubová
Oľga Hubová
OIOľga Ivánková
Oľga Ivánková
The article deals with the numerical analysis of the wind pressure distribution on a group of two high-rise buildings of different shape for different wind directions. The first building has the shape of a circular cylinder and the second was created by a combination of semicircles and a longitudinal member. The floor plan of the second building was similar to the letter S. The simulations were realized as 3D steady RANS. CFD results were compared with experimental measurements in the wind tunnel of the Slovak University of Technology in Bratislava. The results were processed using statistical methods such as correlation coefficient, fractional bias and fraction of data within a factor of 1.3, which determined the most suitable CFD model. The purpose of the present article was to verify the distribution of the external pressure coefficient on scale models at a scale of 1:350, which are located in the Atmospheric Surface Layer (ASL). In numerical modeling, the most important thing was to ensure similarity with the flow in the experimental Atmospheric Boundary Layer (ABL) and with the flow around the models. SST k – ω was evaluated as the most suitable turbulent model for the given type of problem. Turbulent models had a decisive influence on the overall distribution of external wind pressures on objects. The results showed that the most suitable orientation of the objects in terms of the external wind pressure coefficient is 0°, when the cylinder produced a shielding effect, with min mean c pe = −0.786. The most unfavorable wind effects were shown by the wind direction of 90° and 135° with the value min mean c pe = −1.361.

29 October 2023 in Buildings
Verified
Journal Article
Open access
PDF file
OHOlga Hubova
Olga Hubova
MMMarek Macák
Marek Macák
MFMichal Franek
Michal Franek
OIOľga Ivánková
Oľga Ivánková
LKLenka Bujdáková Konečná
Lenka Bujdáková Konečná
The design of a 69 m tall multipurpose building was investigated in this paper. The shape of the structure above the ground was an elliptical cylinder. Under the ground, the building was extended into a cuboid shape (for car parking). External wind pressure coefficients were determined using three methods: wind tunnel tests, CFD, and “the simplification of the shape” (using information defined in building standards). From the obtained results, it was evident that the simplification did not provide results with sufficient accuracy. The external wind pressure coefficients presented in this paper should be used for the design of a similar structure. The shape of the elliptical cylinder is very sensitive to applied wind. Positive pressures only occur on a small area of the windward side. The rest of the windward side is loaded with negative pressures. Therefore, torsional effects can occur, and these can be dangerous for the structure. The leeward side is completely loaded with negative pressures. In our case, this information was necessary for a follow-on static and dynamic analysis of the building. Various subsoil stiffness coefficients were considered. The calculated horizontal displacement was compared with the limit value. A measured wind direction of 20° caused the maximum obtained torsional moment, and a wind direction of 90° induced the maximum obtained force. The commercial program Ansys Fluent 2022 was used for the CFD simulation. The SCIA ENGINEER 21 program was used for follow-on analysis. This paper presents brief information on the selected turbulence model and details the settings used for the CFD simulation. Also, a description of the wind tunnel laboratory utilized in this study is provided, along with a description of the measuring devices used and the methodologies of the tests carried out. The main purpose of this paper is to show how important it is to consider the wind load for the static analysis of a structure like this.

16 April 2020 in MATEC Web of Conferences
Verified
Journal Article
Open access
PDF file
MFMichal Franek
Michal Franek
MMMarek Macák
Marek Macák
OHOľga Hubová
Oľga Hubová
The wind flow around the elliptical object was investigated experimentally in the BLWT wind tunnel in Bratislava and subsequently solved by computer wind flow simulation. On a high-rise building model, the external wind pressure coefficients were evaluated for different wind directions and then compared with the numerical CFD simulation in ANSYS, where different models of turbulence and mesh types were used. The aim of the article was to evaluate and compare the obtained values and after analysing the results to choose the most suitable model of turbulence and mesh types, which showed the smallest deviations from the experimental values.

1 January 2022 in Acta Polytechnica
Verified
Journal Article
Open access
PDF file
MFMichal Franek
Michal Franek
BBBoris Bielek
Boris Bielek
MMMarek Macák
Marek Macák
JKJosip Klem
Josip Klem
This article deals with the dynamics of airflow through a cavity. In windless conditions, where a natural flow causes the flow of air in the cavity, the overall aerodynamic resistance of the cavity is the important aerodynamic parameter, which is the sum of the local resistances alongside the air movement trajectory through the cavity. The total aerodynamic resistance of the cavity must be lesses than the force of the convective buoyancy of the air in the cavity. The following conclusions were found experimentally. The convection occurs in the cavity at every time step with a velocity range from 0.05 <= v [m/s] <= 0.2 to 0.3. The energy regime in the cavity is characterised by inhomogeneity. In the cavity, there are zones of increasing temperatures along the height of the cavity at the inlet. A large area with increased temperatures at the air outlet and a small area with particularly high temperatures in the upper part of the inlet were found.

1 January 2020 in Građevinski materijali i konstrukcije
Verified
Journal Article
Open access
PDF file
OHOlga Hubova
Olga Hubova
MFMichal Franek
Michal Franek
MMMarek Macák
Marek Macák
The article presents the aerodynamic study of solar panel assemblies and determination of wind load. In the first part, the task is solved by computer simulation of the wind flow around the proposed rectangular assembly in the scale of 1:1 using the FLUENT ANSYS program; realization of experimental measurements in the wind tunnel with a boundary layer (BLWT) in Bratislava is presented subsequently. The aim of the solution was to determine the maximum pressure and suction wind load on top and bottom surfaces of panels. The resulting net pressure coefficient represents the maximum local pressure in each panel row as maximum values from all wind directions. The experimentally obtained net pressure coefficient values were compared with computer simulation and the procedures mentioned in standard STN EN 1991-1-4. It can be seen that the inner panels are loaded considerably less than the standard defines. The panels placed on the side of the assembly or on the edge of the aisle are loaded significantly more than the standard defines. Frontal panels are also less wind stressed than in the standard defines.