During testing, the possibility of using hemp biomass for energy purposes was assessed. The criteria assessed were the physical and chemical properties of hemp biomass, as well as the combustion process of straw and briquettes made of it in a low-power boiler. The results were made and compared with currently applicable standards. Technical and chemical properties of hemp biomass are comparable with the best plants used for energy purposes. Studies have also shown the susceptibility of hemp biomass compaction. However, large emissions recorded during the combustion of the tested forms of biofuels from hemp straw in light of applicable standards disqualify this fuel for use in grate-type heating devices with air fed under the grate. It would be advisable to carry out research on the total costs of pellet production and their use in heating devices with a retort burner, while taking into account this biofuel’s ashes’ susceptibility of sintering.

The technology of transesterification of biodiesel obtained from many agricultural products, which are often referred to as renewable resources, yields substantial amounts of by-products. They exhibit various properties that prompt scientific research into potential application thereof. Various spectroscopic methods, e.g. Fourier transform infrared spectroscopy, are being increasingly used in the research. In this paper, we present the results of Fourier transform infrared spectroscopy spectroscopy analyses of technical glycerine, distilled glycerine, and matter organic non glycerol, i.e. by-products of biodiesel production. To facilitate the spectroscopic analysis, a number of parameters were determined for all the materials, e.g. the calorific value, water content, sulphated ash content, methanol content, acidity, as well as the contents of esters, heavy metals, aldehydes, nitrogen, and phosphorus. The results indicate that the analysed products are characterised by a comparable calorific value in the range from 11.35 to 16.05 MJ kg^-1 in the case of matter organic non glycerol and technical glycerine. Observation of changes in the position of selected peaks in the range of 3700-650 cm^-1 in the Fourier transform infrared spectroscopy method facilitates determination of the level of degradation of the analysed material. Changes in the wavelength ranges can be used for monitoring the formation of secondary oxidation products containing carbonyl groups.

The restrictions imposed by the European Green Deal on Europe are expected to make Europe climate-neutral by 2050. In this context, this article examines the current efforts to reduce emission levels, focusing on available international scientific papers concerning European territory, particularly Poland. The study paid special attention to the sector of agriculture, which is considered a key contributor to greenhouse gas generation. It also analysed the impact of various tillage techniques and the application of organic and inorganic fertilisers, e.g., nitrogen fertilisers, digestate, or compost, on the emissions of greenhouse gases and other environmentally harmful substances. Although there are few scientific articles available that comprehensively describe the problem of greenhouse gas emissions from agriculture, it is still possible to observe the growing awareness of farmers and their daily impact on the environment. The current study demonstrated that agricultural activities significantly contribute to the emissions of three main greenhouse gases: carbon dioxide, nitrous oxide, and methane. The tillage and soil fertilisation methods used play a crucial role in their emissions into the atmosphere. The use of no-tillage (or reduced-tillage) techniques contributes to the sustainable development of agriculture while reducing greenhouse gas emissions. The machinery and fuels used, along with innovative systems and sensors for precise fertilisation, play a significant role in lowering emission levels in agriculture. The authors intend to identify potential opportunities to improve crop productivity and contribute to sustainable reductions in gas emissions.

Biodiesel is a very attractive, biodegradable, renewable, and virtually nontoxic form of fuel. It is derived through base-catalysed transesterification of vegetable oils or animal fats. Analysis of biodiesel has become relevant, since the higher quality of the fuel is a key factor in commercialisation and market acceptance. The analytical methods employed are being constantly improved to meet this requirement. The most popular techniques for analysis of biodiesel include mainly chromatography and molecular spectroscopy. FTIR infrared spectroscopy is one of the most important spectroscopic techniques. The article presents the results of UV-Vis absorption spectroscopy and FTIR infrared spectroscopy analysis employed for investigating methyl esters of higher fatty acids obtained with laboratory methods from selected sunflower and rapeseed oils and waste animal fats provided by a slaughterhouse. Commercial methyl esters were included in the analyses for comparison. In all samples, the contents of free glycerol, methanol, esters, and linolenic acid methyl ester in FAME were determined mainly to facilitate the spectroscopic analysis. The results of the investigations conducted with the aforementioned methods clearly indicate that the analysed WCO esters can be successfully used as potential industrial-scale biofuels.