Currently, a lot of focus is dedicated to metal hydride alloy and options of their utilization. Mankind must solve energy problems due to constant population growth and use of non-renewable energy sources. The World resources of oil are limited and therefore the mankind must start utilizing the alternative energy sources for example hydrogen. Its known that the hydrogen can be stored by metal hydride alloys what it represents the safety way of storage with absence high pressure and temperature. The process by produce of the alloy with good absorption properties the research does not end. Some alloy absorbs the hydrogen after they produce immediately, however a lot of them need the activation for improvement or starting absorption process. Process of activation is very important for achieving the maximum capacity at moderate temperature.
5 December 2017 in Advances in Science and Technology Research Journal
This article discusses the measurement of hydrogen storage capacity in Ca72Mg28 alloy that has been produced by melt spinning. The alloy has an amorphous structure in which there is an assumption of hydrogen storage of acceptable concentration. The research is to analyse the possibility of...
31 January 2020 in International Journal for Innovation Education and Research
The paper discusses possibilities of energetic utilization of waste heat from synthesis gas, which worsens possibilities of its further utilization. In this case, it is the recovery of synthesis gas with a high proportion of hydrogen produced by the thermal recovery of municipal waste by means of a plasma reactor. High temperatures deteriorate its recovery potential by separating hydrogen from the gas mixture and its subsequent use in fuel cells. Hydrogen separation takes place in the plant using metal hydride materials.