Multifunctional flexible tactile sensors could be useful to improve the control of prosthetic hands. To that end, highly stretchable liquid metal tactile sensors (LMS) were designed, manufactured via photolithography, and incorporated into the fingertips of a prosthetic hand. Three novel contributions were made with the LMS. First, individual fingertips were used to distinguish between different speeds of sliding contact with different surfaces. Second, differences in surface textures were reliably detected during sliding contact. Third, the capacity for hierarchical tactile sensor integration was demonstrated by using four LMS signals simultaneously to distinguish between ten complex multi-textured surfaces. Four different machine learning algorithms were compared for their successful classification capabilities: K-nearest neighbor (KNN), support vector machine (SVM), random forest (RF), and neural network (NN). The time-frequency features of the LMSs were extracted to train and test the machine learning algorithms. The NN generally performed the best at the speed and texture detection with a single finger and had a 99.2 ± 0.8% accuracy to distinguish between ten different multi-textured surfaces using four LMSs from four fingers simultaneously. The capability for hierarchical multi-finger tactile sensation integration could be useful to provide a higher level of intelligence for artificial hands.

Determining the tumor origin in humans is vital in clinical applications of molecular diagnostics. Metastatic cancer is usually a very aggressive disease with limited diagnostic procedures, despite the fact that many protocols have been evaluated for their effectiveness in prognostication. Research has shown that dysregulation in miRNAs (a class of non-coding, regulatory RNAs) is remarkably involved in oncogenic conditions. This research paper aims to develop a machine learning model that processes an array of miRNAs in 1097 metastatic tissue samples from patients who suffered from various stages of breast cancer. The suggested machine learning model is fed with miRNA quantitative read count data taken from The Cancer Genome Atlas Data Repository. Two main feature-selection techniques have been used, mainly Neighborhood Component Analysis and Minimum Redundancy Maximum Relevance, to identify the most discriminant and relevant miRNAs for their up-regulated and down-regulated states. These miRNAs are then validated as biological identifiers for each of the four cancer stages in breast tumors. Both machine learning algorithms yield performance scores that are significantly higher than the traditional fold-change approach, particularly in earlier stages of cancer, with Neighborhood Component Analysis and Minimum Redundancy Maximum Relevance achieving accuracy scores of up to 0.983 and 0.931, respectively, compared to 0.920 for the FC method. This study underscores the potential of advanced feature-selection methods in enhancing the accuracy of cancer stage identification, paving the way for improved diagnostic and therapeutic strategies in oncology.

A novel method of tactile communication among human-robot and robot-robot collaborative teams is developed for the purpose of adaptive grasp control of dexterous robotic hands. Neural networks are applied to the problem of classifying the direction objects slide against different tactile fingertip sensors in real-time. This ability to classify the direction that an object slides in a dexterous robotic hand was used for adaptive grasp synergy control to afford context dependent robotic reflexes in response to the direction of grasped object slip. Case studies with robot-robot and human-robot collaborative teams successfully demonstrated the feasibility; when object slip in the direction of gravity (towards the ground) was detected, the dexterous hand increased the grasp force to prevent dropping the object. When a human or robot applied an upward force to cause the grasped object to slip upward, the dexterous hand was programmed to release the object into the hand of the other team member. This method of adaptive grasp control using direction of slip detection can improve the efficiency of human-robot and robot-robot teams.

The haptic sense relies upon a plurality of receptors and pathways to produce a complex perceptual experience of contact, pressure, taps, vibrations and flutters. This complexity is yet to be reproduced in haptic feedback interfaces that are used by people controlling a dexterous robotic hand, be it for limb-absence or teleoperation. The goal of the present bimodal haptic armband is to convey both low-frequency pressure changes and high-frequency vibrations from a dexterous robotic hand to a human's upper arm, so as to guide his/her control of the artificial limb. To that end, we design and manufacture four novel soft robotic armbands combining inflatable air chambers and vibrotactile stimulators. We develop control systems for both pathways. We conduct a series of benchtop tests to determine the pneumatic and vibrotactile performance and select from competing designs and materials. We test two of the resulting bimodal haptic armband on human subjects and confirm their ability to use both aspects of this haptic information. Arguing that dexterous artificial hands are presently not used to their fullest capability by the dearth of haptic information in users, this work aims to achieve a more realistic tactile experience for a fluent, more natural usage of robotic artificial hands.

For people who have experienced a spinal cord injury or an amputation, the recovery of sensation and motor control could be incomplete despite noteworthy advances with invasive neural interfaces. Our objective is to explore the feasibility of a novel biohybrid robotic hand model to investigate aspects of tactile sensation and sensorimotor integration with a pre-clinical research platform. Our new biohybrid model couples an artificial hand with biological neural networks (BNN) cultured in a multichannel microelectrode array (MEA). We decoded neural activity to control a finger of the artificial hand that was outfitted with a tactile sensor. The fingertip sensations were encoded into rapidly adapting (RA) or slowly adapting (SA) mechanoreceptor firing patterns that were used to electrically stimulate the BNN. We classified the coherence between afferent and efferent electrodes in the MEA with a convolutional neural network (CNN) using a transfer learning approach. The BNN exhibited the capacity for functional specialization with the RA and SA patterns, represented by significantly different robotic behavior of the biohybrid hand with respect to the tactile encoding method. Furthermore, the CNN was able to distinguish between RA and SA encoding methods with 97.84% ± 0.65% accuracy when the BNN was provided tactile feedback, averaged across three days in vitro (DIV). This novel biohybrid research platform demonstrates that BNNs are sensitive to tactile encoding methods and can integrate robotic tactile sensations with the motor control of an artificial hand. This opens the possibility of using biohybrid research platforms in the future to study aspects of neural interfaces with minimal human risk.

Cervical disc implants are conventional surgical treatments for patients with degenerative disc disease, such as cervical myelopathy and radiculopathy. However, the surgeon still must determine the candidacy of cervical disc implants mainly from the findings of diagnostic imaging studies, which can sometimes lead to complications and implant failure. To help address these problems, a new approach was developed to enable surgeons to preview the post-operative effects of an artificial disc implant in a patient-specific fashion prior to surgery. To that end, a robotic replica of a person’s spine was 3D printed, modified to include an artificial disc implant, and outfitted with a soft magnetic sensor array. The aims of this study are threefold: first, to evaluate the potential of a soft magnetic sensor array to detect the location and amplitude of applied loads; second, to use the soft magnetic sensor array in a 3D printed human spine replica to distinguish between five different robotically actuated postures; and third, to compare the efficacy of four different machine learning algorithms to classify the loads, amplitudes, and postures obtained from the first and second aims. Benchtop experiments showed that the soft magnetic sensor array was capable of precisely detecting the location and amplitude of forces, which were successfully classified by four different machine learning algorithms that were compared for their capabilities: Support Vector Machine (SVM), K-Nearest Neighbor (KNN), Random Forest (RF), and Artificial Neural Network (ANN). In particular, the RF and ANN algorithms were able to classify locations of loads applied 3.25 mm apart with 98.39% ± 1.50% and 98.05% ± 1.56% accuracies, respectively. Furthermore, the ANN had an accuracy of 94.46% ± 2.84% to classify the location that a 10 g load was applied. The artificial disc-implanted spine replica was subjected to flexion and extension by a robotic arm. Five different postures of the spine were successfully classified with 100% ± 0.0% accuracy with the ANN using the soft magnetic sensor array. All results indicated that the magnetic sensor array has promising potential to generate data prior to invasive surgeries that could be utilized to preoperatively assess the suitability of a particular intervention for specific patients and to potentially assist the postoperative care of people with cervical disc implants.