Well-oriented 3D gold flower-like nanoparticles were successfully synthesized by a facile one-pot method, and the gold nanoflowers (AuNFs) were mixed with hemoglobin (Hb) to form a gold nanoflowers/hemoglobin composite. The composite was further combined with multiwalled carbon nanotubes on a glassy carbon electrode (GCE) to fabricate a novel biosensor. The sensor has high stability and bioactivity, and was studied by scanning electron microscopy (SEM) and cyclic voltammetry (CV). The hemoglobin/gold nanoflowers/multiwalled carbon nanotubes glassy carbon electrode (Hb/AuNFs/CNTs/GCE) either retained the Hb in similar native conformations or promoted direct electron transfer. Moreover, the sensor exhibited remarkable catalytic activity toward H2O2 and trichloroacetic acid (TCA). The linear relationship for the determination is in the range of 1.0–60 μM for H2O2 and 0.06–28 mM for TCA. The detection limits were 0.08 μM and 7.3 μM (S/N = 3), respectively.
Polypropylene fiber‐reinforced concrete (PFRC) is a cement‐based composite material with short‐cut fibers which has been utilized to provide multidimensional reinforcement and enhance toughness of concrete. However, this improvement is closely related to the microstructural morphology of the concrete. A nondestructive technique using X‐ray computed tomography (CT) was therefore used to grasp the microscopic texture of PFRC samples. The results showed that the orientation of microcracks, which appear in the interfacial transition zone, are along the surface of the coarse aggregate. The range of distribution of fibers is proportional to fiber volume fraction. The coarse aggregate influence distribution and orientation of polypropylene fibers whose shape are mainly fold line and curve. The dispersion of pores with small volume is uniform, and the distance between the pores with larger volume is short. The proportion of pores with the diameter in the range 0∼199 μm exceeds 70%, of which the sum of volume exceeds a half of total volume with the amount being about 1% of total amount.
1 January 2017 in Advances in Materials Science and Engineering
Faulting prediction is the core of concrete pavement maintenance and design. Highway agencies are always faced with the problem of lower accuracy for the prediction which causes costly maintenance. Although many researchers have developed some performance prediction models, the accuracy of prediction has remained a challenge. This paper reviews performance prediction models and JPCP faulting models that have been used in past research. Then three models including multivariate nonlinear regression (MNLR) model, artificial neural network (ANN) model, and Markov Chain (MC) model are tested and compared using a set of actual pavement survey data taken on interstate highway with varying design features, traffic, and climate data. It is found that MNLR model needs further recalibration, while the ANN model needs more data for training the network. MC model seems a good tool for pavement performance prediction when the data is limited, but it is based on visual inspections and not explicitly related to quantitative physical parameters. This paper then suggests that the further direction for developing the performance prediction model is incorporating the advantages and disadvantages of different models to obtain better accuracy.
1 January 2017 in Advances in Materials Science and Engineering
Shrinkage has been proven to be an important property of early age concrete. The shrinkage strain leads to inherent engineering problems, such as cracking and loss of prestress. Atmospheric temperature is an important factor in shrinkage strain. However, current research does not provide much attention to the effect of atmospheric temperature on shrinkage of early age concrete. In this paper, a laboratory study was undertaken to present the time-dependent shrinkage of early age concrete under temperature variation. A newly developed Material Deformation Tester (MDT), which can simulate consecutive variation of atmospheric temperature, was used to collect the shrinkage strain of specimens and temperature data. A numerical model was established to describe the thermoelastic strain of a specimen. The results show that (1) there are several sharp shrinkages up to 600 μfor early age concrete in the first 3 days; (2) the absolute value of shrinkage strain is larger than thermal strain; and (3) the difference of shrinkage strain under temperature variation or constant temperature is up to 500 μ.
A specific pavement maintenance treatment can deal with many pavement distresses, while a specific pavement condition can be improved by many different pavement maintenance treatments. This makes it difficult to develop a generalized method for treatment selection. In this paper, the problem is approached as a multi-objective optimization problem and the Ideal Point Method (IPM), mathematics technique is applied to address these concerns. The indicators, including a performance jump of present serviceability index, treatment service life, and equivalent annual cost are used in the multi-objective optimization model to determine the adequate treatment. A case study focusing on the optimization of three pavement preventative treatments is presented. A benefit-cost ratio model is presented for comparison. A comparison between the two methods suggests that the ideal point method is more objective. The proposed model provides a new way to optimize the selection of pavement maintenance treatments and can lead to profound implications for maintenance and rehabilitation decision-making.
1 July 2021 in JOURNAL OF SHENZHEN UNIVERSITY SCIENCE AND ENGINEERING
In order to explore the cracking behavior of opening-mode reflective cracks in asphalt overlays, we carry out the three-point bending test of composite beams with cement overlay asphalt layer. We quantitatively evaluate the damage based on the acoustic emission (AE) characteristic parameters.Firstly, we dynamically monitor the damage process of composite beams using AE technique, then, analyze the horizontal strain of the damage process through open source digital imaging software Ncorr,and finally, study the damage process of the composite beam by AE amplitude, AE ringing counts and AE energy. The test results show that AE technology has a good recognition effect on the development of micro-cracks and macro-cracks in the asphalt overlay.According to the AE parameters, the opening-mode reflection cracking process can be divided into four stages: silent period, ascending period, development period and residual period. There is basically no AE signal in the silent period.In the ascending and developing periods, the damage increases rapidly, showing that the AE signal is dense and active, which is consistent with the load curve, showing a single-peak type characteristic.In the residual period, the composite beam is approaching failure.The damage tends to be gentle.Opening-mode reflective cracks firstly spread along both sides of the joint, in a multi-fracture development form, and then one of the cracks developes into a main crack and continues to extend vertically upward, and the secondary crack enters a stagnation state.We propose a method for characterizing damage evolution based on the amount of AE ringing counts damage of the opening-mode reflection cracking behaviorof composited beams. It can provide a reference for the analysis of reflection cracking behavior.