The present study focuses on the valorisation of winery industry wastes through slow pyrolysis of exhausted grape marc (EGM). The optimal pyrolysis parameters were firstly identified by small scale experiments carried out using thermogravimetric analysis. Nine pyrolysis temperatures were tested and their influence on the decomposition of the EGM residue and biochar yield was evaluated. Then, biochar production was conducted in a pilot plant at three chosen temperatures (450, 500 and 550 °C) at which the biochar was shown to be stable. The effects of biochar application to soil with respect to plant (ryegrass) growth was also evaluated. Pyrolysis of EGM at the 450–550 °C temperature range has been shown to generate thermally stable and nutrient-rich biochars, but only the biochar produced at 450 °C showed a marked benefit effect of ryegrass growth.
14 September 2020 in Biomass Conversion and Biorefinery
It has been demonstrated that organic fertilisers could be a source of microplastics (MPs) in agricultural soils. These organic fertilisers comprise a diverse array of matrices including organic waste and by-products. Currently, there is no established methodology for the extraction of MP from these matrices. The present article aims to validate a standardised protocol for the extraction of MPs from a diverse range of complex, organic-rich samples. The protocol has been developed to ensure a high recovery of MPs, to preserve their integrity, and to eliminate organic particles that interfere with FTIR analyses. Spiked MPs sized 315–5000 µm were subjected to a two-step process involving chemical digestion (H2O2, 30% (w/v), 53 °C) and density separation (NaI, >1.60 g·cm−3). This resulted in a mean extraction rate exceeding 95%, with undigested matter remaining below 5%. No evidence of fragmentation was observed. Furthermore, the chemical nature of spiked microplastics is still perfectly interpretable from the FTIR spectra despite the different chemical treatments undergone. These findings thus validate the method for the microplastic range 315–5000 µm. However, a new method for reanalysing the project’s data produced contrasting results, suggesting a significant drop in recovery rates for size ranges below 250 µm. This reanalysis approach constitutes the second innovation of this protocol, and enables a more critical analysis of the results obtained in publications on microplastics.