In this study, the capability of Landsat-8 (L8), Sentinel-2 (S2), Sentinel-1 (S1), and their combination was investigated for estimating aboveground biomass (AGB). A pure stand of Fagus Orientalis located in the Hyrcanian forest of Iran was selected as the study area. The performance of a parametric approach, i.e., Multiple Linear Regression (MLR) model and non-parametric approaches, i.e., k-Nearest Neighbor (k-NN), Random Forest (RF), and Support Vector Regression (SVR), were also evaluated for AGB estimations. Our results indicated that among S2 metrics, the FAPAR canopy biophysical index and NDVI index based on the red-edge band (NIR-b8a) have the highest correlation coefficient (r) of 0.420 and 0.417, respectively. The results of AGB estimation showed that a combination of S2 and S1 datasets using the k-NN algorithm had the best accuracy (R2 of 0.57 and rRMSE of 14.68%). The best rRMSE using L8, S2, and S1 datasets was 18.95, 16.99, and 19.17% using k-NN, k-NN, and MLR algorithms, respectively. The combination of L8 with S1 dataset also improved the rRMSE relative to L8 and S1 separately by 0.96 and 1.18%, respectively. We concluded that the combination of optical data (L8 or S2) with SAR data (S1) improves the broadleaved Hyrcanian AGB estimation.
Thinning is a forest management activity that regulates the competition between the trees within a forest. However, the effect of different thinning treatments on competition is largely unexplored, especially because of the difficulty in measuring crown characteristics. This study aimed to investigate how different type and intensity thinning treatments affect the stem- and crown-based competition of trees based on terrestrial laser scanning (TLS) point clouds. The research was conducted in three study sites in southern Finland where the Scots pine (Pinus sylvestris L.) is the dominant tree species. Nine rectangular sample plots of varying sizes (1000 m2 to 1200 m2) were established within each study site, resulting in 27 sample plots in total. The experimental design of each study site included two levels of thinning intensities and three thinning types, resulting in six different thinning treatments. To assess the competition between the trees, six distance-dependent competition indices were computed for each tree. The indices were based on diameter at breast height (DBH) (CIDBH), height (CIH), maximum crown diameter (CIMCD), crown projection area (CICA), crown volume (CICV), and crown surface area (CICS). The results showed that for both moderate and intensive intensities, the competition decrease was 45.5–82.5% for thinning from below, 15.6–73.6% for thinning from above, and 12.8–66.8% for systematic thinning when compared with control plots. In most cases, the crown- and stem-based metrics were affected by thinning treatments significantly when compared with control plots at a 95% confidence interval. Moreover, moderate from-below and from-above thinning showed no statistical difference with each other in both crown- and stem-based competition indices except for CIDBH (p-value ≤ 0.05). Our results confirm the great potential of TLS point clouds in quantifying stem- and crown-based competition between trees, which could be beneficial for enhancing ecological knowledge on how trees grow in response to competition.
The tree crown, with its functionality of assimilation, respiration, and transpiration, is a key forest ecosystem structure, resulting in high demand for characterizing tree crown structure and growth on a spatiotemporal scale. Airborne laser scanning (ALS) was found to be useful in measuring the structural properties associated with individual tree crowns. However, established ALS-assisted monitoring frameworks are still limited. The main objective of this study was to investigate the feasibility of detecting species-specific individual tree crown growth by means of airborne laser scanning (ALS) measurements in 2009 (T1) and 2014 (T2). Our study was conducted in southern Finland over 91 sample plots with a size of 32 × 32 m. The ALS crown metrics of width (WD), projection area (A2D), volume (V), and surface area (A3D) were derived for species-specific individually matched trees in T1 and T2. The Scots pine (Pinus sylvestris), Norway spruce (Picea abies (L.) H. Karst), and birch (Betula sp.) were the three species groups that studied. We found a high capability of bi-temporal ALS measurements in the detection of species-specific crown growth (Δ), especially for the 3D crown metrics of V and A3D, with Cohen’s D values of 1.09–1.46 (p-value < 0.0001). Scots pine was observed to have the highest relative crown growth (rΔ) and showed statistically significant differences with Norway spruce and birch in terms of rΔWD, rΔA2D, rΔV, and rΔA3D at a 95% confidence interval. Meanwhile, birch and Norway spruce had no statistically significant differences in rΔWD, rΔV, and rΔA3D (p-value < 0.0001). However, the amount of rΔ variability that could be explained by the species was only 2–5%. This revealed the complex nature of growth controlled by many biotic and abiotic factors other than species. Our results address the great potential of ALS data in crown growth detection that can be used for growth studies at large scales.
19 October 2019 in The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences
The estimation of biomass has been highly regarded for assessing carbon sources. In this paper, ALOS PALSAR, Sentinel-1, Sentinel-2 and ground data are used for estimating of above ground biomass (AGB) with SVM-genetic model Moreover Landsat satellite data was used to estimate land use change detection. The wide range of vegetation, textural and principal component analysis (PCA) indices (using optical images) and backscatter, decomposition and textural features (from radar images) are derived together with in situ collected AGB data into model to predict AGB. The results indicated that the coefficient of determination (R2) for ALOS PALSAR, Sentinel-1, Sentinel-2 were 0.51, 0.50 and 0.60 respectively. The best accuracy for combining all data was 0.83. Afterwards, the carbon stock map was calculated. Landsat series data were acquired to document the spatiotemporal dynamics of green spaces in the study area. By using a supervised classification algorithm, multi-temporal land use/cover data were extracted from a set of satellite images and the carbon stock time series simulated by using carbon stock maps and green space (urban forest) maps.
Forest height (FH) is an important driver for aboveground biomass (AGB) that can be obtained using interferometric SAR (InSAR). However, the limited access to the quad-polarimetric data or high-accuracy terrain model makes FH retrieval a challenging task. This study aimed to retrieve FH and further predict AGB by combining TanDEM-X InSAR coherence, Sentinel-1 (S-1), and Sentinel-2 (S-2) data. A total of 125 sample plots with a size of 900 m2 were established in a broadleaved forest of Kheyroud, Iran. The Linear and Sinc models obtained by simplification of the Random Volume over Ground (RVoG) model were used for deriving FHLin and FHSinc. Further investigation was conducted when S-1 and S-2 features including backscatters and multispectral information were added to FH predictions. Using the abovementioned datasets and FH as an additional predictor, AGB was also predicted. K-nearest neighbor (k-NN), random forest (RF), and support vector regression (SVR) were employed for prediction. Lorey's mean height and AGB at sample plots were used in the accuracy assessment. Using the SVR method and synergy of FHSinc, S-1, and S-2 features, the FH prediction was improved (FHimp) with RMSE of 3.18 m and R2 = 0.59. The AGB prediction with RF and the combination of S-1 and S-2 features resulted in RMSE = 62.88 Mg.ha-1 (19.77%) that was improved to RMSE = 51.27 Mg.ha-1 (16.12%) when FHimp included. This study highlighted the capability of TanDEM-X InSAR coherence with certain geometry for FH prediction. Also, the importance of FH in AGB predictions can stimulate further attempts aiming at higher spatiotemporal accuracies.