Lithium metal anode still confronts a series of problems at the way to commercialization though it has advantages in high energy density. The formation of Li dendrite is the major limitation need to be conquered. Here, a facile and simple LiSn alloy anode prepared by a direct metallurgy method is fabricated and evaluated in both liquid electrolyte and solid electrolyte. Structural analysis and electrochemical measurements reveal the promoted ionic transference of interface and enhanced cycling stability in different electrolyte systems, without dendrite formation. Furthermore, the application of this simple and sustainable LiSn alloy can be extended to more alloy anode and might unlock the next-generation anode in the future.
Sulfurized polyacrylonitrile (SPAN) nanocomposites were synthesized and used as a cathode in a novel rechargeable Na+/K+ hybrid battery with high performance for the first time. When 0.9 mol NaPF6 and 0.1 mol KPF6 were dissolved in ethylene carbonate (EC)/dimethyl carbonate(DMC)/ethyl methyl cabonate(EMC) (4:3:2, v/v/v), used as hybrid electrolyte, Na foil was used as the anode, and SPAN composites were used as the cathode, a hybrid ion system was created via composition–decomposition between Na+/K+ and SPAN and stripping–depositing of Na+ with suppressed dendrites by taking advantage of the self-healing electrostatic shield effect. As a result, a highly reversible calculated capacity of 1405.5 mAh gsulfur−1 with a coulombic efficiency approaching 100% after 100 cycles was obtained at a current density of 35 mA g−1. This environmentally benign, low-cost Na+/K+ hybrid battery shows promise as a new future flexible energy storage system (ESS) technology.
Sodium–potassium (NaK) liquid alloy is a promising candidate for use as an anode material in sodium batteries because of its fluidity, which effectively suppresses the growth of sodium or potassium dendrites. However, the poor wettability of NaK alloy on conventional metal substrates is unfavorable for cell fabrication due to its strong surface tension. In this paper, low-density and low-cost fluorinated aluminum foam is used as a substrate support material for NaK liquid alloy. By combining low-surface-tension NaKC with fluorinated aluminum foam, we obtain a uniformly distributed and structurally stable electrode material. The composite electrode has a cycling stability of more than 3000 h in a symmetrical cell. Furthermore, when coupled with a sulfurized polyacrylonitrile cathode in carbonate electrolyte, it maintains excellent stability even after 800 cycles, with 72% of capacity retention.
Sodium-potassium (NaK) liquid alloy is a promising candidate for use as anode material in sodium batteries because of its fluidity, which effectively suppresses the growth of sodium or potassium dendrites. However, the poor wettability of the NaK liquid alloy on conventional metal substrates is unfavorable for cell fabrication due to its strong surface tension. In this paper, low-density and low-cost fluorinated aluminum foam is used as a substrate support material for NaK liquid alloy. By combining low surface tension NaK@C with fluorinated aluminum foam, we obtain a uniformly distributed and structurally stable electrode material. The composite electrode has a cycling stability of more than 3000 hours in a symmetrical cell. Furthermore, when coupled with a sulfurized polyacrylonitrile cathode in carbonate electrolyte, it maintains excellent stability even after 800 cycles, with 72% of capacity retention.