Zhu Changjun

Zhu Changjun


Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
19 January 2021 in Metals
Verified
Journal Article
Open access
PDF file
DXDaofen Xu
Daofen Xu
ZCZhu Changjun
Zhu Changjun
CXChengfu Xu
Chengfu Xu
KCKanghua Chen
Kanghua Chen
The Fe-rich intermetallic phases have a broadly detrimental effect on the mechanical properties of Al–Cu alloy. In this paper, the continuous evolution of Fe-rich intermetallics and their effects on mechanical properties, especially the tensile fracture behavior of 2219 wrought Al–Cu alloys as a function of Fe content against different processing approaches (i.e., as-cast, homogenization, multidirectional forging, and solution-peak aging treatment) were investigated using optical microscopy, scanning electron microscopy, and tensile tests. The results indicated that needle-like Al7Cu2Fe or Al7Cu2(Fe, Mn) intermetallics mainly presented in the final microstructures of all alloys with various Fe contents. The size and number of Al7Cu2Fe/Al7Cu2(Fe, Mn) intermetallics increased with the increase of Fe content. The increase of Fe content had little influence on the ultimate tensile strength and yield strength, while obvious deterioration in the elongation, because fracture initiators mainly occurred at the Al7Cu2Fe/Al7Cu2(Fe, Mn) particles or particles–matrix interface. Therefore, the 2219 Al–Cu alloy with 0.2 wt.% Fe content presented relatively low tensile ductility. The tensile fracture mechanism has been discussed in detail.

25 January 2021 in Nanomaterials
Verified
Journal Article
Open access
PDF file
JLJin Lou
Jin Lou
KCKanghua Chen
Kanghua Chen
NYNachuan Yang
Nachuan Yang
YSYi Shuai
Yi Shuai
ZCZhu Changjun
Zhu Changjun
Lithium metal anode still confronts a series of problems at the way to commercialization though it has advantages in high energy density. The formation of Li dendrite is the major limitation need to be conquered. Here, a facile and simple LiSn alloy anode prepared by a direct metallurgy method is fabricated and evaluated in both liquid electrolyte and solid electrolyte. Structural analysis and electrochemical measurements reveal the promoted ionic transference of interface and enhanced cycling stability in different electrolyte systems, without dendrite formation. Furthermore, the application of this simple and sustainable LiSn alloy can be extended to more alloy anode and might unlock the next-generation anode in the future.

12 October 2018 in Metals
Verified
Journal Article
Open access
PDF file
QCQiang Chen
Qiang Chen
LLLi Liu
Li Liu
ZCZhu Changjun
Zhu Changjun
KCKanghua Chen
Kanghua Chen
A mesoscopic mechanical model based on the Mori-Tanaka method and Eshelby’s inclusion theory was presented to investigate the uniform elastic deformation behavior of Ti6Al4V with β-Ti and α-Ti phases. In particular, elastic mechanics field equations of inclusion and matrix phases were established separately, and several crystal plane diffraction elastic constants were predicted under uniaxial loading in this model. The results demonstrated that diffracted crystal plane elastic constants diversified with the elastic stiffness of the composition phase. In consequence, elastic deformation of one particular phase is related to the constraint of the whole deformation of all the phases constituting the materials. In this work, diffracted crystal plane elastic constants corresponding to different phases exert a substantial role in the determination of stresses by diffraction methods. Several numerical simulation results were compared and discussed.

29 March 2019 in Metals
Verified
Journal Article
Open access
PDF file
YSYe shengping
Ye shengping
KCKanghua Chen
Kanghua Chen
ZCZhu Changjun
Zhu Changjun
SCSongyi Chen
Songyi Chen
The high magnitude of quench-induced residual stress in thick aluminum plates is attributed not only to high thermal stress but also to high yield strength due to quench-induced precipitation hardening. To date, lowering the thermal stress is the only path to reduce the residual stress in the design of quenching technology. In this paper, a new path is proposed that reduces the residual stress through decreasing the yield strength at ambient temperatures by eliminating the precipitation hardening effect during quenching. As certified in several experiments, the high yield strength of thick as-quenched plates decreases rapidly from a short period of extra heat preservation at relatively higher temperatures. Therefore, an interrupted quenching method is proposed, wherein quenching is interrupted after an initial cooling period and the sample is placed in air to make the temperature field uniform; afterward, the sample is cooled to room temperature. Interrupted quenching tests were conducted on 115 mm thick 7050 aluminum plates and significant residual stress reductions were observed in the specimens compared with the residual stresses in the specimens subjected to regular quenching.

22 December 2019 in Metals
Verified
Journal Article
Open access
PDF file
YSYe shengping
Ye shengping
KCKanghua Chen
Kanghua Chen
LLLi Liu
Li Liu
SCSongyi Chen
Songyi Chen
ZCZhu Changjun
Zhu Changjun
The aim of this study was to predict the yield strength of as-quenched aluminum alloys according to their continuous quench cooling path. Our model was established within the framework of quench factor analysis (QFA) by representing a quenching curve as a series of consecutive isothermal transformation events and adding the yield strength increments after each isothermal step to predict the yield strength after continuous quench cooling. For simplification; it was considered that the effective hardeners during quenching were the nanosized solute clusters formed at low temperatures, whereas the other coarse precipitates were neglected. In addition, quenching tests were conducted on aluminum plates with different thicknesses. The predictions were compared with the experimental measurements, and the results showed that the predictions fit the measurements well for the 40- and 80-mm-thick plates but overestimated the as-quenched yield strength at the mid-thickness of the 115-mm-thick plates.