Exploring faster, safer, and more efficient energy storage devices will motivate scientists to develop novel energy storage products with high performance. Herein, we report porous NiO nanoparticles have been prepared by a simple hydrothermal method with CTAB and laboratory tissue paper as a template followed by calcination at three different temperatures (300, 500, and 700 °C). The electrochemical characteristics of the prepared materials were examined in a three-electrode cell configuration using aqueous potassium hydroxide (2.0 M KOH) electrolyte. The NiO-300 electrode displayed the supreme capacitance of 568.7 F g⁻¹ at 0.5 A g⁻¹. The fascinating NiO morphology demonstrates a crucial part in offering simple ion transport, shortening electron, and ion passage channels and rich energetic spots for electrochemical reactions. Finally, the asymmetric supercapacitor (ASC), NiO//AC was constructed using positive and negative electrode materials of NiO-300 and activated carbon (AC), respectively. The assembled ASC displayed excellent supercapacitive performance with a high specific energy (52.4 Wh kg⁻¹), specific power (800 W kg⁻¹), and remarkable cycle life. After quick charging (25 s), such supercapacitors in the series will illuminate the light emitting diode for an extended time, suggesting improvements in energy storage, scalable integrated applications, and ensuring business efficacy. This work will lead to a new generation of high-performance ASCs to portable electronic displays and electric automobiles.

In recent years, ion electrolyte membranes (IEMs) preparation and properties have attracted fabulous attention in fuel cell usages owing to its high ionic conductivity and chemical resistance. Currently, perfluorinatedsulfonicacid (PFSA) membrane has been widely employed in the membrane industry in polymer electrolyte membrane fuel cells (PEMFCs); however, Nafion^TM suffers reduced proton conductivity at a higher temperature, requiring noble metal catalyst (Pt, Ru, and Pt-Ru), and catalyst poisoning by CO. Non-fluorinated polymers are a promising substitute. Polysulfone (PSU) is an aromatic polymer with excellent characteristics that have attracted membrane scientists in recent years. The present review provides an up-to-date development of PSU based electrolyte membranes and its composites for PEMFCs, alkaline membrane fuel cells (AMFCs), and direct methanol fuel cells (DMFCs) application. Various fillers encapsulated in the PEM/AEM moiety are appraised according to their preliminary characteristics and their plausible outcome on PEMFC/DMFC/AMFC. The key issues associated with enhancing the ionic conductivity and chemical stability have been elucidated as well. Furthermore, this review addresses the current tasks, and forthcoming directions are briefly summarized of PEM/AEMs for PEMFCs, DMFCs, AMFCs.

This paper introduces a method for improving the sensitivity to NO₂ gas of a p-type metal oxide semiconductor gas sensor. The gas sensor was fabricated using CuO nanowires (NWs) grown through thermal oxidation and decorated with ZnO nanoparticles (NPs) using a sol-gel method. The CuO gas sensor with a ZnO heterojunction exhibited better sensitivity to NO₂ gas than the pristine CuO gas sensor. The heterojunction in CuO/ZnO gas sensors caused a decrease in the width of the hole accumulation layer (HAL) and an increase in the initial resistance. The possibility to influence the width of the HAL helped improve the NO₂ sensing characteristics of the gas sensor. The growth morphology, atomic composition, and crystal structure of the gas sensors were analyzed using field-emission scanning electron microscopy (FE-SEM), energy-dispersive X-ray spectroscopy, and X-ray diffraction, respectively.

A strategy for improving the sensitivity of a sensor for detecting CO and NH₃ gases is presented herein. The gas sensor was fabricated from ZnO metal oxide semiconductor nanostructures grown via a vapor–liquid–solid process and decorated with α-Fe₂O₃ nanoparticles via a sol–gel process. The response was enhanced by the formation of an α-Fe₂O₃/ZnO n–n heterojunction and the growth of thinner wires. ZnO nanowires were grown on indium–tin–oxide glass electrodes using Sn as a catalyst for growth instead of Au. The structure and elemental composition were investigated using field-emission scanning electron microscopy, energy dispersive X-ray spectroscopy, and X-ray diffraction. The gas sensing results indicate that the response value to 100 ppm CO was 18.8 at the optimum operating temperature of 300 °C.

This paper introduces a strategy for improving the sensitivity of a gas sensor to NO₂ gas. The gas sensor was fabricated using urchin-like ZnO nanostructures grown on MgO particles via vapor-phase growth and decorated with MgZnO nanoparticles via a sol-gel process. The urchin-like ZnO gas sensor decorated with MgZnO showed higher sensitivity to NO₂ gas than a pristine urchin-like ZnO gas sensor. When ZnO and MgZnO form a heterojunction, a two-dimensional electron gas is generated. This improves the performance of the fabricated gas sensor. The growth morphology, atomic composition, and phase structure were confirmed through field-emission scanning electron microscopy, energy-dispersive X-ray spectroscopy, and X-ray diffraction, respectively.